Skip to content
INCREDIBLE SAVINGS - Access Points, LTE devices, Antennas, Accessories and more. Shop Now and Save Up to 80% Off!
INCREDIBLE SAVINGS - Access Points, LTE devices, Antennas, Accessories and more. Shop Now and Save Up to 80% Off!


Cambium ePMP 5GHz MP3000 MicroPOP Access Point Radio w/ Integrated Omni Antenna (FCC)

C058910A132A by Cambium Networks
Sold out
Original price $518.00 - Original price $518.00
Original price
$518.00 - $518.00
Current price $518.00

The ePMP MP 3000 is Cambium Networks’ MicroPOP solution for WISP’s and Enterprise network operators. The MicroPOP MP3000, part of the ePMP portfolio, solves the need for injecting additional capacity where it is needed most as well as extending network coverage in a cost-effective, light-weight manner. For example, a WISP can expand coverage to a new sub-division or area of a village that wasn’t previously reachable by the core ePMP network. Additionally, a WISP or enterprise operator may need to inject additional capacity to a small campus or enclave of buildings. The MP 3000 along with ePMP Subscriber Modules can also serve as a distribution network for wi-fi access points.

The MicroPOP MP 3000 is based on 802.11ac Wave 2 technology and can interoperate with any combination of up to 64 of the ePMP Force 300 series of subscriber modules (including Force 300-13, -13L, -16, -19, -19R and -25) as well as the Force 180/190/200 with backwards compatibility. Capacities of up to 600 Mbps are achievable with a range typically of one mile or 1.5 kilometers. The MP 3000 features an integrated omni antenna in a ruggedized IP67 enclosure.

MicroPOP MP3000 Applications

  • Extend Coverage Areas: Deploy the MP3000 in places unreachable by the main tower or to add adjacent coverage for new subscribers with lower overall density
  • Inject New Capacity: Deploy the MP3000 to a set of customers demanding especially high capacity servers
  • Backhaul for Outdoor Wi-Fi Access Points: Deploy the MP3000 and ePMP Subscriber modules to create a hub-and-spoke backhaul for multiple wi-fi access points

NOTE: the MP 3000 does not support GPS synchronization and does not have an integrated real-time spectrum analyzer

Product Features:

  • 2X2 MIMO support with peak throughput of 600 Mbps
  • 256QAM-5/6, 80 MHz support
  • Supports a wide frequency range: 5150 to 5875 MHz
  • Supports up to 64 subscriber modules
  • Integrated 9 dBi Dual-Polarity Omni-Directional antenna
  • Cloud or on-premises network management with cnMaestro

Product Specifications:
  • Channel Spacing: Configurable on 5 MHz increments
  • Frequency Range: 5150 - 5875 MHz
  • Channel Width: 20 | 40 | 80 MHz
  • Ethernet Interfaced: 100/1000BaseT, rate auto negotiated
  • Powering Methods Supported: 802.3af or 802.3at Powered Device; 56VDC Passive PoE Injector (included)
  • Protocols Used: IPv4/IPV6 , UDP, TCP, IP, ICMP, SNMPv2c, HTTPS, STP, SSH, IGMP Snooping
  • Network Management: HTTPS, SNMPv2c, SSH
  • VLAN: 802.1Q with 802.1p priority
  • ARQ: Yes
  • Antenna: Integrated dual-polarity 9 dBi Omni-Directional antenna
  • Transmit Power Range: 0 to +29 dBm (combined, to regional EIRP limit) (1 dB interval)
  • Surge Suppression: 1 Joule Integrated. C000000L033A 56v Gigabit surge suppressor recommended for optimal surge protection.
  • Environmental: IP67
  • Temperature: -40F to +149F (-40C to +65C)
  • Power Consumption: 13 Watts (Up to 15 Watts in extreme cold temperatures when heater is activated.)
  • Input Voltage: 56 Volts Nominal (input range 41 to 59V)
  • Encryption: 128 bit AES (CCMP mode)