Ubiquiti UniFi Lite Access Point [U6-Lite-US]

The Ubiquiti UniFi 6 Lite is a 2x2MIMO Wi-Fi 6 access point that delivers up to 1.5Gbps aggregate radio rate with 5 GHz (MU-MIMO and OFDMA) and 2.4GHz (MIMO) radios. Mount UniFi 6 Lite horizontally in the ceiling to cover a high-density environment, or mount it vertically on the wall to extend its range. UniFi 6 Lite has a compact and nano-sized design, so it can use nanoHD mounting accessories.

• 2x2 high-efficiency Wi-Fi 6
• 5GHz band 2x2 MU-MIMO and OFDMA with radio rate of 1.2Gbps
• 2.4GHz band 2x2 MIMO with radio rate of 300Mbps
• Gigabit Ethernet, powered with 802.3af PoE
• Compatible with UAP-nanoHD covers and recessed mounting bracket
• Enclosure Characteristics: Polycarbonate 110 and ADC12 Die Casting
• Mounting Characteristics: Polycarbonate, SGCC Steel
• Managed by UniFi Network Controller version: 5.14.3 or higher

• Processor Specs 880MHz MIPS 1004 KEc
• Memory Information: 256MB
• Management Interface: Ethernet In-Band
• Networking Interface: (1) 10/100/1000 Mbps Ethernet RJ45
• Buttons: Factory Reset
• LEDs: White/Blue
• Power Method: 802.3af PoE, Passive PoE (48V)
• Power Supply: 802.3af PoE; 48V, 0.32A PoE Adapter (Not Included)
• Supported Voltage Range: 44 to 57VDC
• Max. Power Consumption: 12W
• Max. TX Power: 2.4GHz: 23dBm, 5GHz: 23dBm
• MIMO: 2.4GHz: 2x2, 5GHz: 2x2
• Throughput Speeds: 300Mbps, 5GHz: 1201Mbps
• Antenna Gain: 2.4GHz: 2.8dBi, 5GHz: 3dBi
• Operating Temperature: -30 to 607deg; C (-22 to 140° F)
• Operating Humidity: 5 - 95% Non-condensing
• Certifications: CE, FCC, IC

Software

• Wi-Fi Standards: 802.11a/b/g, Wi-Fi 4/Wi-Fi 5/Wi-Fi 6
• Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
• BSSID: 8 per Radio
• VLAN: 802.1Q
• Advanced QoS: Per-User Rate Limiting
• Guest Traffic Isolation: Supported
• Concurrent Clients: 300+

Product Includes:

• (1) UniFi Lite Access Point
• (1) Mounting Plate
• (1) Allen Wrench
• (1) Set of Screws