Tycon Power 5 Port High Power POE Gigabit Switch.
TP-SW5G-D by TYCON Systems
Original price $180.95 - Original price $180.95
$180.95 - $180.95
Current price $180.95
This product does not include a power supply. You must purchase one separately Product Features • High Power 10/100 and 1000Mb (“G”) POE Switch • Remotely Power Equipment thru CAT5 Cable up to 100m • Up to 2A per Port • Built-in Surge Protection • Automatic MDI/MDI-X Crossover • Automatic Speed and Duplex Sensing • 1K Self Learning MAC Address Table • Compact Size • High Temperature Operation • CE and FCC Certification The TP-SW5G-D Power Over Ethernet (PoE) 10/100/1000Mb switch offered by Tycon Power Systems is a fully automatic high speed 5 port Ethernet switch with up to 35 Watts of PoE power per port. It complies with the IEEE802.3af/at specifications for valid PoE device detection. The unit supplies power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device. The switch accepts DC power from a user supplied 46V-57V DC power source. There are 2 power inputs for attachment of primary and backup power sources. The switch also accepts PoE power via the 802.3af/at uplink port. Product Specifications • Ethernet Standard: IEEE802.3/IEEE802.3u • Ports: 1 data/POE input and 4 data/POE, automatic crossover and polarity • Transmission Speed: 1000Mbps / 100 Mbps /10 Mbps Auto-negotiation • Switch Technology: Store and Forward • Protocol: CSMA/CD • Flow Control: IEEE802.3x(full-duplex), Back Pressure(half-duplex) • Data Transmission Rate: 1488000pps for 1000baseT, 148800pps for 100baseT, 14880pps for 10baseT • Address Table: 1K MAC, self-learning • Connections: Shielded RJ45 • POE Output Ports: Port 1-4, auto power management Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8) • Maximum POE Power: 35W per port • POE Auto Detection: IEEE 802.3af, 802.3at • POE Protection: Over Temperature, Over Current, Over/Under Voltage • Data Surge Protection: IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact), IEC61000-4-4 (EFT) 40A (5/50ns) , IEC61000-4-5 (Lightning) 20A (8/20μs • DC Power Input: 48VDC (42V to 60V), Dual DC Inputs, Reverse Polarity Protected. Also Accepts POE power input on Port 5 Product Applications • Wireless Access Points and Client Devices • IP Phone and Security Camera Systems • Power multiple devices from 1 data cable Technical Data Sheets: TP-SW5G-D Data Sheet