SAF Tehnika PhoeniX G2 IDU 4xSFP 60MHz 1Gbps 1+1/2 AES

SAF PhoeniX G2 IDU (2xN,4xSFP,3xRJ-45,-48V,half-1U,19”), 60 MHz, 1 Gbps, 1+1/2+0, AES. PhoeniX G2 split mount system is designed to fit in a classic telecom architecture with a radio located outdoors and a sheltered indoor unit. Supporting channel bandwidths of up to 60 MHz, the PhoeniX G2 offers capacities of up to 452 Mbps full duplex in 1+0 configurations. Product Specifications • Concept/Form Factor: Split Mount • Frequency Bands: 2GHz, 4GHz, U4GHz, L6GHz, U6GHz, 7GHz, 8GHz, 11GHz, 13GHz, 18GHz, 23GHz, 3GHz, • Capacity: &nbspl Up to 900Mbps in 2+0 configuration   452Mbps at 60MHz 1024QAM 1+0 • Max Modulation: 1024QAM • Configurations: 1+0, 1+1 HSB/SD/FD, 2+0 (Layer 1 aggregation), 2+0 XPIC, 2+2 (with two IDUs) • ACM and ATPC: Yes • Channel Bandwidth: -ETSI: from 7MHz, up to 56MHz -FCC: from 10MHz, up to 60MHz • Ethernet Traffic   3x RJ-45: 10/100/1000Base-T   4x SFP: 1000BaseSX/LX     2x SFP ports also work as Extension/Protection ports • Ethernet Management Access: 1x 10/100/1000Base-T, RJ-45 • Serial Port for Configuration: USB B (alternative IP Port) • Flash Memory Port: USB A • ODU port: 2x N-Type Female • DC Power Port: Single Block 4 Pole • Switch Type: Managed Gigabit Ethernet Layer 2 • Max Frame Size: 64 to 2048 bytes, up to 10240 bytes for Jumbo Mode • MAC table: 8192 entries: automatic learning and aging • Packet Buffer: 125KB, non-blocking store&forward • Flow Control: 802.3x • VLAN Support: 802.1Q up to 4096 VLANs • QinQ (double tagging): Yes • QOS: 64 level DiffServ (DSCP) or 8 level 802.1p mapped in 4 prioritization queues with VLAN support, IPv6 Traffic Class • Synchronization: PTP 1588V2 &bull Protocols: via WEB GUI (HTTP/HTTPS), CLI (telnet/SSH) NMS (SNMPv1/v2c/v3), Serial interface (USB IP port) • Access:   In-band (via VLAN)   Out-of-band (115 kbps) • SNMP: Yes, SNMP traps, MIB, SNMP v1/v2c/v3 • Element Management System (EMS) Web Based, HTTP/HTTPS • Temperature Range / Humidity -5deg;C to +45deg;C / 24deg;F to 113deg;F / 0% to 95% • Dimensions: HxWxD 1/2 width 1U (44 x 220 x 240mm) / (1.73 x 8.66 x 9.45 in) • Weight: 2.2kg / 4.9lb • Max. Power Consumption:   IDU only: <30W   IDU + 2xODU: <180W • IDU-ODU Connection: Maximum Permissible IF Cable Attentuation = 15dB • DC Port: -20V to -72V DC (conforms to ETSI EN 300 132-2) • Operation: ETSI EN 300 019, Part 1-3. Class 3.2 • Storage: ETSI EN 300 019, Part 1-1, Class 1.2 • Transportation: ETSI EN 300 019, Part 1-2, Class 2.3 • Power: EN 300 132-2 • Radio Frequency IDU+ODU: EN 302 217-2-2 • EMC: EN 301 489-1, EN 301 489-3 • Safety: EIC 60950-1/EN 60950-1 Product Includes (1) EAGXA261 (1) User Manual Product Documentation EAGXA261 Datasheet