Skip to content

Country

IgniteNet GLinq Indoor Cloud-Managed Gigabit Ethernet To Coax Bridge w/reverse power feed and integrated 2.4GHz Wi-FI

GL-I-1GE-1C-US by IgniteNet
Sold out
Original price $75.00 - Original price $75.00
Original price
$75.00
$75.00 - $75.00
Current price $75.00

IgniteNet GLinq is a powerful ethernet over coax converter that enables service providers to deliver gigabit speeds via existing and new coax cabling infrastructure. The GLinq system is ideal for both providing bandwidth to buildings with outdoor coax as well as delivering gigabit speeds within buildings using existing coax cabling infrastructure. Operators can already easily deliver gigabit speeds to customers wirelessly using IgniteNet’s 60GHz MetroLinq products – now they can also easily share that delivered capacity throughout the whole building. The unique GLinq + MetroLinq combination provides a clean, simple, fast installation of gigabit connections. Both the indoor and the outdoor models have an integrated 2.4GHz radio which can provide Wi-Fi connectivity as well as easy setup and management using the same device.

Features
  • Reverse power feed for powering remote rooftop converters and backhaul
  • Powerful and affordable Cloud-controller
  • Integrated 2.4 GHz Wi-Fi radio simplifies remote management of rooftop units and allows providing Wi-Fi access using the same device for your customers
  • Up to 15 slave converters can be connected to a master device for sharing the
  •   gigabit connectivity throughout the building

Product Specifications

  • Highest Performance PHY Data Rates:
        Up to 2Gbps PHY rate   

         Supports all G.hn basebands: 25, 50, 100, 200MHz

  • Reliability and Robustness:
        LDPC forward error correction provides enhanced FEC over all wire media
        Automated PHY block level error detection and retransmission
        Enhanced selective repeat ARQ based ACK for improved integrity in noisy channels
        Robust communication Mode for high noise environments
  • Security:
        128-bit AES CCMP encryption

         End to End encryption pair wise keys
        Strict authentication rules

  • Enhanced Hardware Support
        Enhanced Traffic handling
        Hardware packet inspection for IPv4 IGMP snooping and IPv6 MLD
        >Hardware based Bandwidth limitation
        8 levels of packet prioritized QoS
        Power Management
  • Available Interfaces:
        1000Base-T Ethernet
        G.hn 2 Gbps coax PHY with F-type female connector
  • Wi-Fi Features:
        Supports Service Provider and Enterprise type networks
        Stand-alone or Cloud-controlled operating modes
        Bridged AP WDS mode
        802.11b/g/n, 2x2 (2.4GHz)
        Supports up to 8 SSIDs per radio
        IEEE 802.11e Wi-Fi Multimedia (WMM-QoS)
        WPA, WPA2-PSK, WPA2-AES, PSK and Enterprise
        Admission control by client MAC address
  • RF Performance (TX): 2.4GHz: 25dBm @ 6Mbps, 18dBm @ 300Mbps
  • RF Performance (RX): 2.4GHz: -90dBm @ 6Mbps, -72dBm @ 300Mbps
  • Antenna Indoor: 2.4GHz 3 dBi omni-directional
  • LEDS: Power, Wi-Fi, Ethernet, G.hn
  • Indoor Operating Temperature:
        Temperature rating 0 to 50 C°/ 32 to 122 F
        Store temperature -40 to 70 C°/ -40 to 158 F

        Mounting options: Wall

  • Dimensions: Indoor: 131 x 26 x 100 mm/ 5.16 x 1.02 x 3.94 inch
  • Weight: Indoor: 220 g (0.48 lb)
  • Power: Operation voltage 12 – 54 V
        Power consumption 6.5 W max
        DC jack (central pin 2.0 mm, diameter 5.5 mm)
        Screw terminal block (5 mm pin spacing) (outdoor model only)
        Power through coaxial cable optional

        Max current 2.5A on coaxial power system

Product Includes
(1) GL-I-1GE-1C-US Bridge
(1) User Manual