Cambium PTP820S 24GHz Unlicensed Lo 24080-24110MHz All-Outdoor Radio

The Cambium PTP820S Unlicensed Lo 24080-24110MHz TR170, FCC, DX4, FT1 All-Outdoor Radio PTP 820 is a point-to-point microwave back haul platform that serves all your radio transport needs. It integrates leading networking functionality with the industry's most advanced microwave technologies creating a superior microwave transport solution. The PTP 820s series is composed of high-density multi-technology nodes and integrated radio units, the PTP 820S series offers flexibility in choosing all-indoor, split-mount and all-outdoor configuration options. Exploiting unique Line of Sight (LOS) Multiple Input Multiple Output (MIMO) technology, modulation up to 2048QAM and wider channel bandwidths, ensures Industry leading throughput and spectral efficiency.

• Supports 24 GHz unlicensed Lo (24080-24110MHz)
• Up to 2048 QAM with 11 steps hitless and errorless Adaptive Coding & Modulations (ACM) for high reliability
• Integrated Ethernet switch
• Ethernet synchronization: SyncE/IEEE 1588v2
• Header de-duplication for additional capacity boost
• Low latency with unique frame cut-through for latency sensitive services

• Supported Frequency: 24 GHz unlicensed Lo (24080-24110MHz)
• Role in the Network: Compact all outdoor
• Transport Technology: All packet
• TDM Interface: None
• Modulation: QPSK to 2048 QAM w/ACM
• Channel Size: 28,56,30,40,50,60,80 MHz
• Capacity (Layer 2): 605 Mbps
• Capacity with Multi-Layer Compression: 833 Mbps
• Configuration: 1+0, 1+1 HSB
• LOS MIMO: No
• XPIC: No
• Ethernet Interface: 1 x 10/100/1000Base-T and 2x1000base-X or 10/100/1000Base-T
• Management Interface: 1 x 10/100 Base-T
• External Alarm: None
• Dimensions (HxWxD - mm): 230 x 233 x 98
• Environmental: -33C to +55C (-45C to +60C extended)
• Power Input: -48 VDC
• PoE Injector Power Input: -48 VDC or +24 VDC
• Maximum Power Consumption: 32 W

• Traffic Interfaces – 1 x 10/100/1000Base-T (RJ-45) and 2 x 1000base-X (SFP) or 2 x 10/100/1000 Base-T (electrical SFP)
• Management Interface - 1 x 10/100 BaseT (RJ-45)
• Optical SFP Types - Optical 1000Base-LX (1310 nm) or SX (850nm)
• Note: SFP devices must be of industrial grade (-40°C to +85°C)
• MTU: – 9600 Bytes
• Quality of Service: Multiple Classification criteria (VLAN ID, p-bits, IPv4, DSCP, IPv6 TC, MPLS EXP), 8 priority queues, Deep buffering (configurable up to 64 Mbit per queue), WRED, Hierarchical QoS – high service granularity*, P-bit marking/remarking
• 4K VLANs
• VLAN add/remove/translate
• Frame Cut Through – controlled latency and PDV for delay sensitive applications
• Header De-Duplication – Capacity boosting by eliminating inefficiency in all layers (L2, MPLS, L3, L4, Tunneling – GTP for LTE, GRE)
• Adaptive Bandwidth Notification (ABN)
• Network Resiliency - G.8032 and Multiple Spanning Tree Protocol (MSTP)*
• Ethernet OAM – ITU-T Y.1731 FM, ITU-T Y.1731 PM*

• Sync Distribution over any traffic interface (GE/FE)
• Sync-E (ITU-T G.8261, G.8262)
• SSM/ESMC Support for ring/mesh applications (ITU-T G.8264)
• Sync-E Regenerator mode, providing PRC grade (ITU-T G.811) performance for smart pipe applications
• IEEE-1588:
• Optimized Transport for reduced PDV
• IEEE-1588 TC

• Carrier Ethernet 2.0 (CE 2.0)** Supported Ethernet Standards
• 10/100/1000base-T/X (IEEE 802.3)
• Ethernet VLANs (IEEE 802.3ac)
• Virtual LAN (VLAN, IEEE 802.1Q)
• Class of service (IEEE 802.1p)
• Provider bridges (QinQ – IEEE 802.1ad)
• Link aggregation (IEEE 802.3ad)
• Auto MDI/MDIX for 1000baseT
• RFC 1349: IPv4 TOS
• RFC 2474: IPv4 DSCP
• RFC 2460: IPv6 Traffic Classes
• AES 256-bit Encryption
• Secured protocols (HTTPS, SNMPV3, SSH, SFTP)
• Radius authentication and authorization
• EMC: EN 301 489-1, EN 301 489-4, Class B, (Europe), FCC 47 CFR, part 15, class B, (US), ICES-003, Class B (Canada),

• Surge: EN61000-4-5, Class 4 (for PWR and ETH1/PoE ports)
• Safety: EN 60950-1, IEC 60950-1, UL 60950-1, CSA-C22.2 No.60950-1, EN 60950-22, UL 60950-22, CSAC22.2.60950- 22
• Ingress Protection: IP66-compliant
• Storage: ETSI EN 300 019-1-1 Class 1.2
• Transportation: ETSI EN 300 019-1-2 Class 2.3

• Dimensions: 230mm(H), 233mm(W), 98mm(D), 6.0kg
• Pole Diameter Range (for Remote Mount Installation): 8.89 cm – 11.43 cm
• Operating Temperature: -33°C to +55°C (-45°C to +60°C extended)
• Standard Input: -48 VDC
• IDU DC Input range: -40 to -60 VDC
• Maximum Power Consumption 6-11 GHz: 40W; 13-38 GHz: 35W
• PoE Injector: Dimensions – 134mm(H), 190mm(W), 62mm(D), 1 kg
• PoE Injector Environmental: 33°C to +55°C (-45°C to +60°C extended)
• PoE Injector Power Input: Standard Input: -48 or +24 VDC (Optional)
• DC Input range: ±(18/40.5 to 60) VDC (+18VDC extended range is supported as part of the nominal +24VDC support)
• PoE Injector Interfaces:
• GbE Data Port supporting 10/100/1000Base-T
• Power-Over-Ethernet (PoE) Port
• DC Power Port –40V to -60V (a PoE supporting two redundant DC feeds each supporting ±(18-60)V is available)