Cambium PTP 670 4.9 - 6.05GHz Connectorized Radio w/ 2 N-Female Connectors (no power supply)

This product is a standalone ODU, it does not come with a power supply.

The C050067B003B is a standalone PTP 670 radio, it does not come with a power supply. The standout feature of PTP 670 is the High Capacity MultiPoint (HCMP) capabilities. It's an ideal solution for temporary or emergency network deployments, as one radio can connect up to 8 remote nodes.

• Frequency band: 4.9 to 6.05GHz
• Maximum of 450MB/s and maximum range of 155 miles in a PTP topology
• Up to 8 remote notes and maximum of 25 mile range in a HCMP topology
• FIPS-197 128/256-bit AES encryption
• IEEE 1588v2 and Synchronous Ethernet (SyncE)

• RF Bands: Wide-band operation 4.9 to 6.05GHz (allowable frequencies and bands are dictated by individual country regulations)
• Channel Sizes: 5/10/15/20/30/40/45MHz channels, depends on individual country regulations
• Spectral Efficiency: 10bps/Hz maximum
• Channel Selection: By Dynamic Spectrum Optimization or manual intervention. Automatic selection on start-up and continual self-optimization to avoid interference
• Maximum Transit Power: Up to 27dBm
• Modulation / Error Correction: Fast Preemptive Adaptive Modulation featuring 13 modulation / FEC coding levels ranging from BPSK to 256 QAM dual-payload MIMO
• Duplex Scheme: Time Division Duplex (TDD), Adaptive or fixed transmit/receive duty cycles, Split frequency operation allows separate transmit and receive frequencies where allowed by regulation, Optional TDD synchronization using PTP-SYNCH Module
• Antenna: Operates with a selection of separately-purchased single and dual polarity antennas through (2) N-Type female connectors
• Range: Up to 155 miles (250km)
• Security: FIPS-197 compliant 128/256-bit AES Encryption (optional) HTTPS and SNMPv3, Identity-based user accounts Configurable password rules, User authentication and RADIUS support, Event logging and management; optional logging via syslog, Disaster recovery and vulnerability management
• Ethernet Protocol: IEEE 802.3
• Latency: 1-3 milliseconds one direction
• QoS: Extensive QoS supporting up to 8 Queues
• Packet Classification: Layer 2 and Layer 3 IEEE 802.1p, MPLS, Ethernet priority
• Packet Performance: Line rate (>850k packets per second)
• Timing Transport: Synchronous Ethernet; IEEE 1588v2
• Frame Support: PTP Mode: Jumbo frame up to 9600 bytes, HCMP Mode: 2000 bytes per frame
• Flexible I/O: (2) Gigabit Ethernet copper ports: Gigabit Port 1: Data + PoE power input, Gigabit Port 2: 802.3at PoE output port, (1) SFP port: Single-mode fiber, multi-mode fiber, or copper Gigabit Ethernet options available
• T1/E1 TDM Support: (8) T1/E1 TDM (Network Indoor Unit (NIDU)), G.823-compliant timing, DC power input (compatible with AC+DC Power Injector output)
• Network Management: In-band and out-of-band management (OOBM)
• System Management: IPv6/IPv4 dual-stack management support, Web access via browser using HTTP or HTTPs/TLS3 SNMP v1, v2c and v3, MIB-II & proprietary PTP MIB, Online spectrum analyzer (no impact on payload traffic or network operation)
• Installation: Built-in audio and graphical assistance for link optimization
• Remote Modules Master: Up to 8 Nodes
• Channel Bandwidth: 20 and 40MHz
• Spectral Efficiency: 8bps/Hz Max
• Line Rate Packet per Second: 850K pps
• Latency in HCMP Mode: 2 to 4ms one way (typically)
• Dimensions: 294 x 318 x 90mm (8.0 x 12.5 x 3.5")
• Weight: 3.1kg (6.8lbs), including bracket
• Operating Temperature: -40 to 140°F (-40 to 60°C), including solar radiation
• Dust-Water Intrusion Protection: IP66 and IP67
• Wind Speed Survival: 200mph (322kph)
• Power Consumption: 30W maximum (up to 70W with 802.3at device on auxiliary products)
• Protection and Safety: UL60950-1, IEC60950-1, EN60950-1, CSA-C22.2 No. 60950-1, CB approval for Global
• Radio: 4.9GHz: FCC Part 90Y, RSS-111, 5.x GHz: FCC Part 15, sub-parts 15C and 15E; RSS 210 Issue 8;, EN 302 502; EN 301 893 Eire ComReg 02/71R1, UK Approval to IR2007, EMC: Europe - EN301 489-1 and -4.