BLiNQ Networks FW-300i 3.5GHz LTE CBRS Base Unit without Embedded EPC Kit 10W Center Band 48 FCC

BLiNQ Networks FW-300i 20MHz LTE CBRS base unit without Embedded EPC Kit 10W Center FCC Bands 48 (without embedded EPC) is a single piece of hardware that is easy to set up, fits anywhere, and provides incredible network capacity. Simply place the FW-300i on the side of a building or water tower and it is ready to go immediately.

• Brings massive capacity and standard LTE together
• Lowers installation time and operational cost by up to 6x
• Works with any LTE CPE on the market
• Integrated antennas are built-in for a "cell-in-a-box" solution
• Outperforms competitors in a frequency-2 reuse scenario
• Delivers the best cost per gigabit air capacity in the industry

• Frequency Band: TDD LTE Bands 48
• Transmit Power (Bands 42, 43) *: Max 33 dBm / sector of 60deg, 17dBi Integrated Antenna 50dBm EIRP/Sector
• Channel Bandwidth: 10, 20MHz (15MHz Road-map Support)
• MIMO: 6Tx x 6Rx (several possible MIMO configurations)
• LTE Compliance: 3GPP Release 10 (SW upgrade up to Release 13)
• Connected/Active UEs: Up to 96 active users per sector. 288 active users per Box
• Carrier Aggregation: Supports contiguous and non-contiguous 1CC, 2CC, 3CC, over entire band
• Throughput DL TDD: 3GPP Release 10 (SW upgrade to Release 13)
• Throughput UL TDD: 3GPP Release 10 (SW upgrade to Release 13)
• Operating Mode: TD-LTE
• Power: Consumption (Band 46) 80W max.
• Power: Consumption (Band 42,43,48) 150W max.
• Power: 48V DC
• Connectivity: Default: 1 x Copper 1000BaseT & 1 x SFP
• Synchronization Integral GPS receiver (GPS GLONASS BeiDou), Extra PPS Port,
• Optional: External GPS, 1588v2
• CBRS: CBSD Type B SAS Support, Integrated Domain Proxy SAS
• Embedded EPC: Software Option
• Configuration: WebUI / CLI, Radio and Ethernet performance monitoring
• EMS Integration: SNMP v2c/v3
• OAM Protocols: NetConf, HTTP(S), TCP/IP, UDP, (S)FTP, SSH, TR-069/TR-196
• Gain: 17dBi
• Azimuth coverage (-5dB): 180°
• Azimuth Beam-width (-3dB): 45°
• Azimuth Beam-width (-5dB): 60°
• Elevation Beam-width (- 3dB): 10°
• Electrical Down-tilt: 0°
• Azimuth Side-lobe < -25dB (Typ.)
• Front-to-Back Ratio @180° > 30dB (Typ.)
• Co-Polar Port-to-Port Isolation 15dB (Typ.)
• Cross-Polarization Port-to- Port Isolation: > 20dB (Typ.)
• Max. VSWR: 1.5:1
• Polarization: Dual Pol 45°
• Lightning Protection: DC Ground
• Dimensions (L x W x D): 350x570x227 mm (13.78”x 22.4”x 8.9”)
• Survival Wind Speed: > 200 km/hr
• Weight: 12.0 kg (26.45lb)
• Operational Temperature: -40°C to 60°C (-40°F to 140°F)
• Mechanical Up/Down Tilt: 0° to 5°,10°

(1) BLiNQ Networks FW-300i Base Unit

(1) Mounting Bracket

(1) Mounting Assembly

(8) Washers 1/4in

(8) Socket Head Cap Screws 1/4in.-20, 5/8in.L

(4) Washers 3/8in

(4) Hex Nuts 3/8in. -16

(1) User Manual