BLiNQ Networks FW-25 Band 41 CAT12 2.5GHz Outdoor Standard Gain CPE
FWC-122-25
by BLiNQ Networks
Original price
$300.00
-
Original price
$300.00
Original price
$300.00
$300.00
-
$300.00
Current price
$300.00
Supporting up to 80 MHz bandwidth with carrier aggregation and 256 QAM modulation in downlink, the BLiNQ Networks FWC-122-25 CPE provides a high capacity solution to meet the connectivity needs of a wide variety of users. Its rugged housing, installation bracket and high IP67 rating also provides peace of mind for deployments in all kinds of tough outdoor environments.
Product Features:- Supports TDD-LTE Band 41
- 3GPP Release 12 Compliant
- Supports up to UE LTE Downlink Category 12/ Uplink Category 13 PHY Rate
- Supports 4x4 MIMO with 40 MHz CA Maximum and DL 2x2 MIMO up to 80 MHz CA
- Supports DL 256QAM with DL 2x2 MIMO only (Contiguous and Non-Contiguous Bandwidth)
- Supports UL 2Tx (CDD / UL_CA/ UL_MIMO)
- Physical 2Tx & 4Rx in RF Front End
- Supports 1.8V and 3V SIM and USIM Card for LTE Mode
- Supports Dynamic Host Configuration Protocol
- Built-in Web Server for Web-Based Configuration
- Password Protected Access and Configuration
- Supports IEEE 802.3, IEEE 802.3u, 802.3ab (10/100/1000 Mbps )
- Supports 802.3at POE standard - Available on outdoor rated WAN port
- Supports NAT/Tunnel/Bridge/Router Mode
- Supports VPN Pass-Through
- IP67 Environmental Rating
- PoE: 802.3at
- Power Input: Universal range 100~240V AC ; Output: 56 VDC
- Reset/Reboot Button: Tactile Switch (inside box)
- Operating Humidity: 5% to 95%
- Storage Humidity 5% to 95%
- Operational Temperature: -40°F to 131°F (-40°C to 55°C)
- Storage Temperature: -40°F to 158°F (-40°C to 70°C)
- FCC: FCC Certified
- Safety: IEC 60950-22:2016, IEC 62368-1:2014 compliant
- RF Exposure: Meets 47 CFR FCC Part 2.1091
(1) BLiNQ Networks FW-122HG-25 CPE
(1) CAT 5 Cable
(1) PoE Adapter
(1) Power Cord
(1) Mounting Bracket