Ubiquiti UniFi 802.11ac High-Density Indoor/Outdoor 2.4/5GHz AP (4x4 MU-MIMO)

Deploy UniFi AC HD AP in high-density environments requiring maximum wireless performance. The UniFi AC HD AP features simultaneous dual-band, 4x4 MU-MIMO technology and convenient 802.3at PoE+ compatibility. The Wave 2 MU-MIMO technology allows the AP to communicate with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience. The UniFi AC HD AP is the first UniFi 802.11ac Wave 2 AP. It combines the performance increases from MU-MIMO technology and the use of 4x4 spatial streams to deliver up to 125% greater performance than a typical Wave 1 AP.

At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
• Four 1x1 clients
• Two 2x2 clients
• One 2x2 clients and two 1x1 clients
• One 3x3 clients and one 1x1 client

Product Features
• Radio Hardware Acceleration: Independent 2.4GHz and 5GHz dedicated hardware offload for maximized multi-user throughput and reduced latency
• CPU Hardware Acceleration: Dedicated hardware offload for QoS, Guest Control, and Client Management
• Optimized for MU-MIMO: Genetically optimized antenna arrays for maximal utilization of 802.11ac Wave 2 MU-MIMO Beam Forming
• Beam Forming: Data is sent and received using multiple antennas to increase throughput and range

Product Specifications
• Dimensions: 220 x 220 x 49.1mm (8.66 x 8.66 x 1.89")
• Weight: 700g (1.54lbs)
• Weight w/ Mounting Kits: 830g (1.83lbs)
• Networking Interface: (2) 10/100/1000 Ethernet Ports
• Buttons: Reset
• Power Method: Passive Power over Ethernet (48V), 802.3at PoE+ Supported
• Supported Voltage Range: 44 to 57VDC
• Power Supply: 48V, 0.5A PoE Gigabit Adapter
• Power Save: Supported
• Maximum Power Consumption: 17W
• TX Power:
     2.4GHz: 6-25dBm
     5GHz: 6-25dBm
• Antennas:
     2.4GHz: (2) Dual-Port, Dual-Polarity Antennas, 3dBi each
     5GHz: (2) Dual-Port, Dual-Polarity Antennas, 4dBi each
• Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2
• Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
• BSSID: Up to Four per Radio
• Mounting: Wall/Ceiling (Kits Included)
• Operating Temperature: -10 to 70°C (14 to 158°F)
• Operating Humidity: 5 to 95% non-condensing
• Certifications: CE, FCC, IC

Advanced Traffic Management
• VLAN: 802.1Q
• Advanced QoS: Per-User Rate Limiting
• Guest Traffic Isolation: Supported
• WMM: Voice, Video, Best Effort, and Background
• Concurrent Clients: 500+

Supported Data Rates (Mbps)
• 802.11a: 6, 9, 12,18, 24, 36, 54 Mbps
• 802.11n: 6,5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40)
• 802.11ac: 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80)
• 802.11b: 1, 2, 5.5, 11 Mbps
• 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps

Product Includes:
(1) UniFi AP AC HD
(1) Mounting Bracket
(1) Ceiling Backing Plate
(4) Flat Head Screws
(4) Keep Nuts
(4) Screws
(4) Screw Anchors
(1) Gigabit PoE (48V, 0.5A) with Mount Bracket
(1) Power Cord
(1) Quick Start Guide

Product Documentation
Ubiquiti UAP-AC-HD Datasheet
Ubiquiti UAP-AC-HD Quick Start Guide