Tycon Solar RemotePro 12V 8W Continuous Remote Power System with 12V 40A Output Voltage

The Tycon Solar RemotePro RPPL12-36-30-PUMP outdoor remote Off-Grid power systems are specifically designed for applications that require a high current (up to 40A) intermittent power source such as pump and motorized equipment. The sealed and weatherproof glass filled Polycarbonate enclosures holds four batteries for a total of 12V 36Ah capacity. The enclosures are hinged and gasket sealed. They can accept a padlock or tamper seal.

The enclosures can be mounted to a wall or pole with the included mounting bracket system.

The high quality solar panels have a 25 year power output guarantee. The 30W solar panels can be mounted to a 51mm to 101mm (2" to 4") diameter pole or alternately to a wall with the included bracket kit.

Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid batteries. Enclosures have multiple ports for cables. They are vented to prevent residual buildup of hydrogen gas.

Batteries are an Advance Glass Matt (AGM) type which have good all temperature deep discharge performance.

Product Features

• Capable of switching 40A with included relay to operate high startup current equipment like pumps and motors.

• Complete Remote Power Solution for Off-Grid operation

• Weatherproof, UV resistant, outdoor enclosures

• Enclosures can be Wall or Pole Mounted

• High Performance Valve Regulated Sealed Lead Acid Batteries

• Advanced battery charge controller protects against overcharge and over discharge

Applications

• Fuel Pumps

• Water Pumps

• Remote Lighting

• Motors

• Motorized Gates

• Backup Power Systems

Product Specifications

• Rated Continuous Power Generation: 8W

• Reserve Time @ Rated Power: 27hrs

• Output Voltage (DC): 12V 40A via Relay

• Battery Voltage (DC): 12V

• Battery Capacity (Amp Hours): 36Ah

• Battery Type: Valve Regulated Sealed Lead Acid / Absorbent Glass Mat (AGM)

• Battery Life: 5 Years Typical

• Controller Type: PWM 12/24V 20A

• Overcharge Protection: 14.4V

• Over-discharge protection: 11.0V

• Over-discharge recovery volts: 12.5V

• Controller Self Consumption: < 0.5W

• Enclosure Type: Glass Filled Polycarbonate

• Enclosure External Size: 17.5 x 12.5 x 6” (445 x 318 x 152mm)

• Enclosure Internal Size: 14 x 10 x 5” (356 x 254 x 127mm)

• Solar Panel Dims: 21.5” X 19.3” (545 x 490mm)

• Operating Temperature: -30°C to +60°C (-22°F to 140°F)

• System Weight (no batteries): 22lb (10kg)

• Battery Weight: 22lb (10kg)

• Wind Speed Rating: 110MPH (49m/s)

• Warranty: 3 Years

Product Includes

(1) Solar Panel

(1) Solar Panel Cable

(1) Battery

(1) 35W Solar Mount

(1) Outdoor Enclosure