Gamma Electronics High Performance Cold Shrink Tube 4-inch 32mm/10mm

Cold Shrink Tube is a specially formulated pre expanded silicone rubber shrink tube that does not require heat to shrink. It is supplied expanded over an easily removable plastic cylinder. When the plastic cord is pulled, it allows the silicone tubing to shrink rapidly to seal and protect the connector, while gripping tight around the cable. This Cold Shrink Tube product is extremely resilient. It will seal tight and hold its pressure after ageing and exposure. This Silicone Cold Shrink Tubing product holds tight and seals without building up the cable. No foam strips are needed when applied, which makes an easier application and a better seal.

Product Applications:

• Provides Excellent Physical Protection and Moisture Sealing for Telecom Connectors and cables.
• Perfect Application for Remote Radio Unit Connections
• Can be Installed with Less Room than Clam Shell Enclosures
• Cable Jacket and Sheath Repairs
• Corrosion Protection for Fittings and Couplings
• Protect Connectors from Weather, Moisture, UV, Ozone, Dust and Fungus

• Installation Temperature: -15⁰ F to 158⁰ F
• Easily Removed with Knife
• Shrink Method: Pull Cord
• Shrink Ratio: Exceeds 2:1
• Colors: Black
• Highly Flexible
• 1000 Volt
• Excellent Tear Resistance
• UV and Ozone Resistant
• Water Tight and Weather Resistant to IP-68 Standard
• Acid and Alkalis Resistant

• Black sleek looking outside appearance
• Multi use for power and signal
• Easy rip cord installation
• Protects against water ingress
• Meets the IP-68 standard
• Protects against UV, OZONE and FUNGUS
• Protects connectors up to 32mm/1.26” OD (10-4.3 or similar)
• Seals cables as small as 10mm/.394” OD (superflex)
• Length: 6” or special lengths available per request