Skip to content

Country

BLiNQ Networks FW-300i 3.5GHz LTE CBRS Base Unit without Embedded EPC Kit 10W Center Band 48 FCC

FW3-B48-00-HP-NA-K by BLiNQ Networks
Sold out
Original price $8,000.00 - Original price $8,000.00
Original price
$8,000.00
$8,000.00 - $8,000.00
Current price $8,000.00

BLiNQ Networks FW-300i 20MHz LTE CBRS base unit without Embedded EPC Kit 10W Center FCC Bands 48 (without embedded EPC) is a single piece of hardware that is easy to set up, fits anywhere, and provides incredible network capacity. Simply place the FW-300i on the side of a building or water tower and it is ready to go immediately.

Product Features:

  • Brings massive capacity and standard LTE together
  • Lowers installation time and operational cost by up to 6x
  • Works with any LTE CPE on the market
  • Integrated antennas are built-in for a "cell-in-a-box" solution
  • Outperforms competitors in a frequency-2 reuse scenario
  • Delivers the best cost per gigabit air capacity in the industry

Product Specifications:

  • Frequency Band: TDD LTE Bands 48
  • Transmit Power (Bands 42, 43) *: Max 33 dBm / sector of 60deg, 17dBi Integrated Antenna 50dBm EIRP/Sector
  • Channel Bandwidth: 10, 20MHz (15MHz Road-map Support)
  • MIMO: 6Tx x 6Rx (several possible MIMO configurations)
  • LTE Compliance: 3GPP Release 10 (SW upgrade up to Release 13)
  • Connected/Active UEs: Up to 96 active users per sector. 288 active users per Box
  • Carrier Aggregation: Supports contiguous and non-contiguous 1CC, 2CC, 3CC, over entire band
  • Throughput DL TDD: 3GPP Release 10 (SW upgrade to Release 13)
  • Throughput UL TDD: 3GPP Release 10 (SW upgrade to Release 13)
  • Operating Mode: TD-LTE
  • Power: Consumption (Band 46) 80W max.
  • Power: Consumption (Band 42,43,48) 150W max.
  • Power: 48V DC
  • Connectivity: Default: 1 x Copper 1000BaseT & 1 x SFP
  • Synchronization Integral GPS receiver (GPS GLONASS BeiDou), Extra PPS Port,
  • Optional: External GPS, 1588v2
  • CBRS: CBSD Type B SAS Support, Integrated Domain Proxy SAS
  • Embedded EPC: Software Option
  • Configuration: WebUI / CLI, Radio and Ethernet performance monitoring
  • EMS Integration: SNMP v2c/v3
  • OAM Protocols: NetConf, HTTP(S), TCP/IP, UDP, (S)FTP, SSH, TR-069/TR-196
  • Gain: 17dBi
  • Azimuth coverage (-5dB): 180°
  • Azimuth Beam-width (-3dB): 45°
  • Azimuth Beam-width (-5dB): 60°
  • Elevation Beam-width (- 3dB): 10°
  • Electrical Down-tilt: 0°
  • Azimuth Side-lobe < -25dB (Typ.)
  • Front-to-Back Ratio @180° > 30dB (Typ.)
  • Co-Polar Port-to-Port Isolation 15dB (Typ.)
  • Cross-Polarization Port-to- Port Isolation: > 20dB (Typ.)
  • Max. VSWR: 1.5:1
  • Polarization: Dual Pol 45°
  • Lightning Protection: DC Ground
  • Dimensions (L x W x D): 350x570x227 mm (13.78”x 22.4”x 8.9”)
  • Survival Wind Speed: > 200 km/hour
  • Weight: 12.0 kg (26.45lb)
  • Operational Temperature: -40°C to 60°C (-40°F to 140°F)
  • Mechanical Up/Down Tilt: 0° to 5°,10°
Product Includes:
(1) BLiNQ Networks FW-300i Base Unit
(1) Mounting Bracket
(1) Mounting Assembly
(8) Washers 1/4in
(8) Socket Head Cap Screws 1/4in.-20, 5/8in.L
(4) Washers 3/8in
(4) Hex Nuts 3/8in. -16
(1) User Manual