GAM-12-M-PROMO Positron 12 Dual-Pair MIMO Copper Port Multiplexer + 6 End Point Devices PROMO

Positron 12 Dual-Pair MIMO Copper Port Multiplexer + 6 Twisted Pair End Point Devices PROMO

Positron 12 Dual-Pair MIMO Copper Port Multiplexer + 6 Twisted Pair End Point Devices PROMO

Availability: Usually ships the same day In stock - Direct ship from manufacturer.
This is a Promotional bundle containing 1 GAM-12-M Twisted Pair Multiplexer and 6 G1000-M End Point Devices.
The Positron Gigabit Access Mux (GAM) can offer Gigabit speeds to subscribers in fiber-fed MDUs at ~30% of the cost of competing technologies and the best part is…no construction and no disruptive cable-runs required!

The GAM is ideal for brownfield MDUs and provides managed non-blocking Gigabit bandwidth services to subscribers over existing telephone wire (Cat-2 or Cat-3), or coaxial cable to extended distances, at a lower cost and with reduced complexity compared with and other GTTH technologies such as GPON and DOCSIS.

This is a Promotional bundle containing 1 GAM-12-M Twisted Pair Multiplexer and 6 G1000-M End Point Devices.

GAM-12-M Description

“Fiber to the Home” is far from the only and most efficient technology to deliver Gigabit Internet access to subscribers. Retrofitting an existing (brownfield) Multi-Dwelling Unit (MDU) with fiber is complex and expensive. With the Aggregation Multiplexer (GAM), positron Access addresses the key challenge of delivering Gigabit Internet access to subscribers in MDUs as well as dense Single Family Unit (SFU) homes by leveraging the existing telephone or coaxial infrastructure to deliver near symmetrical Gigabit services at a fraction of the cost of alternatives.

The ITU-T G.9960 Wave-2 standard is designed to leverage the existing telephone wiring, (UTP, CAT-3 or CAT-5/5e) or RG-6/RG-59 coax cabling to deliver a Gigabit Internet service to each subscriber without the cost, complexity and delays associated with in-building fiber installation. is used as an Access technology by Operators looking to simplify their access network and backend infrastructure with an Ethernet-like technology that is highly scalable without some of the inherent complexity of DSL-related technologies.

With, Operators deliver advanced services such as Gigabit High Speed Residential Internet and 4K IPTV without the high capital and operational expenses associated with a fiber retrofit. Each subscriber port supports up to 1.7 Gbps of dynamically allocated bandwidth for near symmetrical Gigabit services over the existing telephone wire or coaxial cable. The Positron GAM solution is MEF CE 2.0 compliant and is ideally suited to deliver Business Ethernet services in an MDU and/or MTU deployment.

G1000-M Description

The Positron Access Solutions to Ethernet Bridge for twisted pair is a Managed Demarcation Point acting as a Virtual CPE (vCPE) that can be used to connect to a Residential Gateway (RG) that does not have native support for on its WAN port.

The G1000-M device is used to control how a Residential Gateway (or User CPE) connects to the Access Network under the control of the Positron GAM. In this role, it makes sure the information transmitted over the links is protected with strong AES-128 encryption.

GAM-12-M Features

• SFP+ offer versatile support for Active Ethernet and for GEPON, 10GEPON, NG-PON2 and XGS-PON via external ONU/ONT devices; Also compatible with 3rd party PON SFP ONT modules

G1000-M Features

• Wave-2 to Ethernet Bridge over Twisted Pair
• Multiple Input Multiple Output (MIMO) mode
• port (RJ14 port)
• Telephone port (via built-in POTS splitter)
• Two 10/100/1000BaseT RJ45 ports

GAM-12-M Specifications

• 10 GigE SFP+: 2
• Ports / Type:12 MIMO (RJ14)
• Out-of-band Management Ports:
• (1) 10/100/1000BaseT,
• (1) serial

G1000-M Specifications

• LED: Power, RJ45 ports link/active, link
• Power Source: 12 Vdc / 1A power adapter
• Power Consumption: Less than 3W
• Certification: CE Mark, FCC Part 15 Class A
• Operating Temperature: 0°C to 40°C
• Storage Temperature: -25°C to 80°C
• Operating Humidity: 5% to 95% relative, non-condensing
• Standards: Wave-2 Client based on GigaWire Alliance specification and fully compliant with the following ITU-T standards
• G.9960 Amendment 2 - System Architecture and PHY Layer
• G.9961 Data Link Layer
• G.9962 Management
• G.9964 PSD
• Ease of Deployment: Support operation over telephone wiring (G1000-M) or coax cabling (G1000-C)
• Point-to-point and Point-to-multipoint support: Supports Point-to-point (twisted pair and coax) with G1000-M
• Ease of Operation: Automatic firmware and configuration management via the Positron GAM
• Encryption: AES-128 encryption with individual keys for each end-node under the control of the Positron GAM acting as the Master Node
• Modulation and Frequency Band: Supports OFDM 200 MHz (Singe Input Single Output - SISO) with support for Neighbor Domain Interface Mitigation (NDIM), Radio Band Notching function allows cohabitation with legacy analog cable TV channels over coax
• Bandwidth Management: Up to 1.7 Gbps with Dynamic Bandwidth Allocation to optimize throughput based on nature of traffic flows with TDD Multiplexing for programmable upstream / downstream ratio
• Vectoring (Telephone Wiring): Support for VectorBoost cloud-based vectoring for Far-End Crosstalk (FEXT) mitigation and improved performance over telephone wiring
• Mitigation of Near-end Crosstalk: Near End Crosstalk (NEXT) mitigation and support for Neighbor Domain Interface Mitigation (NDIM)
• PSD: Programmable PSD mask for coexistence with xDSL / radio and Far End Crosstalk (FEXT) mitigation via Cloud-based VectorBoost vectoring
• Reliability and Resiliency: State of the art LDPC Forward Error Correction (FEC)

Product Includes

• (1) GAM-12-M Twisted Pair Multiplexer
• (6) G1000-M End Point Devices

Product Documentation

Positron GAM-12-M Data Sheet
Positron G1000-M Data Sheet
More Information
Manufacturer Positron
Country of Manufacture Canada
Large or Oversize Package No
HTS Code 8517.69.0000