(888) 929-3610
Affordable Wireless Solutions

Q+85MP01D - MikroTik QSFP+ 40G 850nm Optical Module

Availability: Pre Order

Estimated Availability: Fourth week of August

Regular Price: $59.00

Special Price: $52.50

wisp consulting wisp managed services
MikroTik QSFP+ 40G 850nm optical module offers 4 independent full-duplex channels with up to 10 Gbps per channel bandwidth and aggregate bandwidth of 40 Gbps. It can provide a connection over 100 m on OM3 Multimode Fiber (MMF) and
150 m on OM4 MMF. The module has built-in digital diagnostic functions, including optical power monitoring, and will perform well in environments up to 70° C.

Q+85MP01D Diagram


Product Documentation

MikroTik Q+85MP01D Data Sheet

 

RouterOS User Manuals and Technical Documentation
MikroTik Technical Support Information

What is RouterOS?
RouterOS Manual
RouterOS Features

Not all features may be available due to product hardware configuration.

The device comes with RouterOS - the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager. RouterOS is a stand-alone operating system based on the Linux v3.3.5 kernel. You can try RouterOS today, go to MikroTik Website for a free-trial demo. The free trial provides all of the features with no limitations. Major features include:

Firewall:

Statefull filtering Source and destination NAT NAT helpers (h323, pptp, quake3, sip, ftp, irc, tftp) Internal connection, routing and packet marks Filtering by IP address and address range, port and port range, IP protocol, DSCP and many more Address lists Custom Layer7 matcher IPv6 support PCC - per connection classifier, used in load balancing configurations

Routing:

Static routing Virtual Routing and Forwarding (VRF) Policy based routing Interface routing ECMP routing IPv4 dynamic routing protocols: RIP v1/v2, OSPFv2, BGP v4 IPv6 dynamic routing protocols: RIPng, OSPFv3, BGP Bi-directional Forwarding Detection ( BFD)

MPLS:

Static Label bindings for IPv4 Label Distribution protocol for IPv4 RSVP Traffic Engineering tunnels VPLS MP-BGP based autodiscovery and signaling MP-BGP based MPLS IP VPN complete list of MPLS features

VPN:

Ipsec – tunnel and transport mode, certificate or PSK, AH and ESP security protocols. Hardware encryption support on RouterBOARD 1000. Point to point tunneling (OpenVPN, PPTP, PPPoE, L2TP, SSTP) Advanced PPP features (MLPPP, BCP) Simple tunnels ( IPIP, EoIP) IPv4 andIPv6 support 6 to 4 tunnel support (IPv6 over IPv4 network) VLAN – IEEE802.1q Virtual LAN support, Q-in-Q support MPLS based VPNs

Wireless:

IEEE802.11a/b/g wireless client and access point Full IEEE802.11n support Nstreme and Nstreme2 proprietary protocols NV2 protocol Wireless Distribution System (WDS) Virtual AP WEP, WPA, WPA2 Access control list Wireless client roaming WMM HWMP+ Wireless MESH protocol MME wireless routing protocol

DHCP:

Per interface DHCP server DHCP client and relay Static and dynamic DHCP leases RADIUS support Custom DHCP options DHCPv6 Prefix Delegation (DHCPv6-PD) DHCPv6 Client Hotspot Plug-n-Play access to the Network Authentication of local Network Clients Users Accounting RADIUS support for Authentication and Accounting

QoS:

Hierarchical Token Bucket ( HTB) QoS system with CIR, MIR, burst and priority support Simple and fast solution for basic QoS implementation - Simple queues Dynamic client rate equalization ( PCQ)

Proxy:

HTTP caching proxy server Transparent HTTP proxy SOCKS protocol support DNS static entries Support for caching on a separate drive Parent proxy support Access control list Caching list

Tools:

Ping, traceroute Bandwidth test, ping flood Packet sniffer, torch Telnet, ssh E-mail and SMS send tools Automated script execution tools CALEA File Fetch tool Advanced traffic generator

Other features:

Samba support OpenFlow support Bridging – spanning tree protocol (STP, RSTP), bridge firewall and MAC natting. Dynamic DNS update tool NTP client/server and synchronization with GPS system VRRP v2 and v3 support SNMP M3P - MikroTik Packet packer protocol for wireless links and ethernet MNDP - MikroTik neighbor discovery protocol, supports CDP (Cisco discovery protocol) RADIUS authentication and accounting TFTP server Synchronous interface support (Farsync cards only) (Removed in v5.x) Asynchronous – serial PPP dial-in/dial-out, dial on demand ISDN – dial-in/dial-out, 128K bundle support, Cisco HDLC, x75i, x75ui, x75bui line protocols, dial on demand

Available Services For This Product

Related Products

Check items to add to the cart or
select all


  1. Maxxwave MW-FM-2P-QSFP+ Dual Port 40Gbe QSFP+ LAN Module w/Intel XL710 Ethernet Controller Maxxwave MW-FM-2P-QSFP+ Dual Port 40Gbe QSFP+ LAN Module w/Intel XL710 Ethernet Controller

    Regular Price: $525.00

    Special Price: $475.00

  2. MikroTik 40 Gbps Direct Attach QSFP+ Cable MikroTik 40 Gbps Direct Attach QSFP+ Cable
    $29.00
  3. MikroTik 40 Gbps QSFP+ Brake-Out Cable to 4x10G SFP+ MikroTik 40 Gbps QSFP+ Brake-Out Cable to 4x10G SFP+

    Regular Price: $69.00

    Special Price: $59.50

MikroTik QSFP+ 40G 850nm optical module offers 4 independent full-duplex channels with up to 10 Gbps per channel bandwidth and aggregate bandwidth of 40 Gbps.
SKU Q+85MP01D
Manufacturer MikroTik
Country of Manufacture China
Large or Oversize Package No
HTS Code 8517.69.0000
ECCN EAR99
CCATS No
UPC No
You may also be interested in the following product(s)

Back to top