(888) 929-3610
Affordable Wireless Solutions

RBmUPS - MikroTik mUPS 12V PoE Injector

Availability: Out of stock

Regular Price: $29.00

Special Price: $24.00

The intelligent MikroTik mUPS is a 12-volt battery charged PoE injector. It works just like a Gigabit PoE injector, but better. When power is lost, there's no need to be bogged down in a hassle because unlike the Gigibit PoE, the mUPS PoE switches over to the 12V battery (not included). Even if your power source is 28V, the connected RouterBOARD will not reboot when the power dies. Instead, it intuitively switches over to the 12V battery.

The mUPS might be simple in its internal body just as much as its external, but it's compact nature makes it a very reliable contraption for your network and also for situations where stable power input is not available. Thus, this device is a hot-point for your solar-powered home or even car or any other solar or automotive installations. You can use the mUPS with any single 12V battery (AGM, Gel, Lead Acid, regular car batteries, deep cycle marine batteries, etc.).***EOL***

Product Features
• Battery backup capability with a 12V battery connector
• RouterOS

Product Specifications
• 10/100/1000 Ethernet ports: 2
• Short Detection Time: ~50us
• Short Protection Delay: ~20ms
• After Short Recovery Time: ~1s
• Measurement Update Time: ~45s
• PoE in: 12 - 28 V
• DC in: 12 - 28 V
• Battery Connector: Female tab terminal 6.3 x 0.8 mm
• Battery charging current: 1 A max
• Poe out max current limit: 1 A

Product Includes:

• (1) 24 V 1.5 A Power adapter
• (1) Screw kit
• (1) Gigabit PoE injector
• (1) Plastic zip tie
• (1) Battery DC wire with T2 Tab terminal (also fits T1)
• (1) Mount bracket

Product Data Sheet

MikroTik RBmUPS Data Sheet


RouterOS User Manuals and Technical Documentation
MikroTik Technical Support Information

What is RouterOS?
RouterOS Manual
RouterOS Features

Not all features may be available due to product hardware configuration.

The device comes with RouterOS - the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager. RouterOS is a stand-alone operating system based on the Linux v3.3.5 kernel. You can try RouterOS today, go to MikroTik Website for a free-trial demo. The free trial provides all of the features with no limitations. Major features include:


Statefull filtering Source and destination NAT NAT helpers (h323, pptp, quake3, sip, ftp, irc, tftp) Internal connection, routing and packet marks Filtering by IP address and address range, port and port range, IP protocol, DSCP and many more Address lists Custom Layer7 matcher IPv6 support PCC - per connection classifier, used in load balancing configurations


Static routing Virtual Routing and Forwarding (VRF) Policy based routing Interface routing ECMP routing IPv4 dynamic routing protocols: RIP v1/v2, OSPFv2, BGP v4 IPv6 dynamic routing protocols: RIPng, OSPFv3, BGP Bi-directional Forwarding Detection ( BFD)


Static Label bindings for IPv4 Label Distribution protocol for IPv4 RSVP Traffic Engineering tunnels VPLS MP-BGP based autodiscovery and signaling MP-BGP based MPLS IP VPN complete list of MPLS features


Ipsec – tunnel and transport mode, certificate or PSK, AH and ESP security protocols. Hardware encryption support on RouterBOARD 1000. Point to point tunneling (OpenVPN, PPTP, PPPoE, L2TP, SSTP) Advanced PPP features (MLPPP, BCP) Simple tunnels ( IPIP, EoIP) IPv4 andIPv6 support 6 to 4 tunnel support (IPv6 over IPv4 network) VLAN – IEEE802.1q Virtual LAN support, Q-in-Q support MPLS based VPNs


IEEE802.11a/b/g wireless client and access point Full IEEE802.11n support Nstreme and Nstreme2 proprietary protocols NV2 protocol Wireless Distribution System (WDS) Virtual AP WEP, WPA, WPA2 Access control list Wireless client roaming WMM HWMP+ Wireless MESH protocol MME wireless routing protocol


Per interface DHCP server DHCP client and relay Static and dynamic DHCP leases RADIUS support Custom DHCP options DHCPv6 Prefix Delegation (DHCPv6-PD) DHCPv6 Client Hotspot Plug-n-Play access to the Network Authentication of local Network Clients Users Accounting RADIUS support for Authentication and Accounting


Hierarchical Token Bucket ( HTB) QoS system with CIR, MIR, burst and priority support Simple and fast solution for basic QoS implementation - Simple queues Dynamic client rate equalization ( PCQ)


HTTP caching proxy server Transparent HTTP proxy SOCKS protocol support DNS static entries Support for caching on a separate drive Parent proxy support Access control list Caching list


Ping, traceroute Bandwidth test, ping flood Packet sniffer, torch Telnet, ssh E-mail and SMS send tools Automated script execution tools CALEA File Fetch tool Advanced traffic generator

Other features:

Samba support OpenFlow support Bridging – spanning tree protocol (STP, RSTP), bridge firewall and MAC natting. Dynamic DNS update tool NTP client/server and synchronization with GPS system VRRP v2 and v3 support SNMP M3P - MikroTik Packet packer protocol for wireless links and ethernet MNDP - MikroTik neighbor discovery protocol, supports CDP (Cisco discovery protocol) RADIUS authentication and accounting TFTP server Synchronous interface support (Farsync cards only) (Removed in v5.x) Asynchronous – serial PPP dial-in/dial-out, dial on demand ISDN – dial-in/dial-out, 128K bundle support, Cisco HDLC, x75i, x75ui, x75bui line protocols, dial on demand

Available Services For This Product

Related Products

Check items to add to the cart or
select all

  1. iDEATRONIK Smart PowerBank 48V 802.3af PoE iDEATRONIK Smart PowerBank 48V 802.3af PoE

    Regular Price: $120.00

    Special Price: $79.00

  2. MikroTik GPEN Passive POE Injector MikroTik GPEN Passive POE Injector
The latest form of artificial intelligence in a 12-volt battery PoE injector that switches on automatically when needed to provide a continuous source of power.
Manufacturer MikroTik
Country of Manufacture
Large or Oversize Package N/A
HTS Code 8517.69.0000
You may also be interested in the following product(s)

Back to top