(888) 929-3610
Affordable Wireless Solutions

RB912R-2nD-LTm&R11e-LTE - MikroTik LtAP mini series 2.4GHz 802.11b/g/n dual-chain 1.5dBi Access Point INTL

Availability: Pre Order

Regular Price: $129.00

Special Price: $107.50

wisp consulting wisp managed services
MikroTik LtAP mini LTE kit is a small weatherproof 2.4 GHz wireless access point with a built-in cellular modem that supports 2G, 3G and 4G (LTE) connectivity. It has a 10/100 Ethernet port for your wired devices and RS232 serial port gives you console access for management. INTL. You can connect to the LtAP mini’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP mini LTE also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging and supports international LTE bands 1,2,3,7,8,20,38 and 40. INTL

Product Features

• 2.4 GHz AP in a rugged case
• miniPCIe for LTE
• Two SIM slots
• Built in GPS
• Serial port for other devices
• Perfect for cars or outdoor mobile applications

Product Specifications

• Product Code: RB912R-2nD-LTm&R11e-LTE
• CPU: QCA9531 650 MHz
• Size of RAM: 64 MB
• Storage: 16 MB
• 10/100 Ethernet ports: 1
• Wireless: Built-in 2.4 GHz 802.11b/g/n, dual-chain
• Wireless chip model: QCA9531
• Wireless regulations: Specific frequency range can be limited by country regulations
• Antenna beam width: 360°
• Wireless antenna gain: 1.5 dBi
• GPS: Built-in MT3337V, with uUFL RF connector and active antenna support
• PoE in: Yes
• SIM slot: 2 Mini SIM slots
• LTE modem: Included
• LTE category: 4 (150Mbps Downlink, 50Mbps Uplink)
• 3G category: R7 (21Mbps Downlinks, 5.76Mbps Uplink)
• 2G category: Class12
• LTE antenna gain: 3.5 dBi (with uFL connector)
• Serial port: RS232 (shared with GPS port)
• Supported input voltage: PoE in: 10 V - 57 V (Passive PoE and 802.3af/at with unshielded cable)
• DC jack: 8 - 30 V
• MicroUSB: 5 V
• Dimensions: 139 x 77 x 28,5 mm
• Operating temperature: -40°C .. +70°C tested
• License level: 4
• Operating System: RouterOS
• Max Power Consumption: 9 W

Supported Bands

• LTE (FDD) bands: 1/2/3/7/8/20 (2100/1900/1800/2600/900/800)
• LTE (TDD) bands: 38/40 (2600/2300)
• 3G bands: 1/2/5/8 (2100/1900/800/900)
• 2G bands: 2/3/5/8 (1900/1800/800/900)

Product Includes

• (1) MikroTik LtAP Access Point
• (1) PoE Injector
• (1) Power Adapater (24V 1.2A)
• (1) User Manual

Product Documentation

MikroTik LtAP Data Sheet


RouterOS User Manuals and Technical Documentation
MikroTik Technical Support Information

What is RouterOS?
RouterOS Manual
RouterOS Features

Not all features may be available due to product hardware configuration.

The device comes with RouterOS - the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager. RouterOS is a stand-alone operating system based on the Linux v3.3.5 kernel. You can try RouterOS today, go to MikroTik Website for a free-trial demo. The free trial provides all of the features with no limitations. Major features include:


Statefull filtering Source and destination NAT NAT helpers (h323, pptp, quake3, sip, ftp, irc, tftp) Internal connection, routing and packet marks Filtering by IP address and address range, port and port range, IP protocol, DSCP and many more Address lists Custom Layer7 matcher IPv6 support PCC - per connection classifier, used in load balancing configurations


Static routing Virtual Routing and Forwarding (VRF) Policy based routing Interface routing ECMP routing IPv4 dynamic routing protocols: RIP v1/v2, OSPFv2, BGP v4 IPv6 dynamic routing protocols: RIPng, OSPFv3, BGP Bi-directional Forwarding Detection ( BFD)


Static Label bindings for IPv4 Label Distribution protocol for IPv4 RSVP Traffic Engineering tunnels VPLS MP-BGP based autodiscovery and signaling MP-BGP based MPLS IP VPN complete list of MPLS features


Ipsec – tunnel and transport mode, certificate or PSK, AH and ESP security protocols. Hardware encryption support on RouterBOARD 1000. Point to point tunneling (OpenVPN, PPTP, PPPoE, L2TP, SSTP) Advanced PPP features (MLPPP, BCP) Simple tunnels ( IPIP, EoIP) IPv4 andIPv6 support 6 to 4 tunnel support (IPv6 over IPv4 network) VLAN – IEEE802.1q Virtual LAN support, Q-in-Q support MPLS based VPNs


IEEE802.11a/b/g wireless client and access point Full IEEE802.11n support Nstreme and Nstreme2 proprietary protocols NV2 protocol Wireless Distribution System (WDS) Virtual AP WEP, WPA, WPA2 Access control list Wireless client roaming WMM HWMP+ Wireless MESH protocol MME wireless routing protocol


Per interface DHCP server DHCP client and relay Static and dynamic DHCP leases RADIUS support Custom DHCP options DHCPv6 Prefix Delegation (DHCPv6-PD) DHCPv6 Client Hotspot Plug-n-Play access to the Network Authentication of local Network Clients Users Accounting RADIUS support for Authentication and Accounting


Hierarchical Token Bucket ( HTB) QoS system with CIR, MIR, burst and priority support Simple and fast solution for basic QoS implementation - Simple queues Dynamic client rate equalization ( PCQ)


HTTP caching proxy server Transparent HTTP proxy SOCKS protocol support DNS static entries Support for caching on a separate drive Parent proxy support Access control list Caching list


Ping, traceroute Bandwidth test, ping flood Packet sniffer, torch Telnet, ssh E-mail and SMS send tools Automated script execution tools CALEA File Fetch tool Advanced traffic generator

Other features:

Samba support OpenFlow support Bridging – spanning tree protocol (STP, RSTP), bridge firewall and MAC natting. Dynamic DNS update tool NTP client/server and synchronization with GPS system VRRP v2 and v3 support SNMP M3P - MikroTik Packet packer protocol for wireless links and ethernet MNDP - MikroTik neighbor discovery protocol, supports CDP (Cisco discovery protocol) RADIUS authentication and accounting TFTP server Synchronous interface support (Farsync cards only) (Removed in v5.x) Asynchronous – serial PPP dial-in/dial-out, dial on demand ISDN – dial-in/dial-out, 128K bundle support, Cisco HDLC, x75i, x75ui, x75bui line protocols, dial on demand

Available Services For This Product

Related Products

Check items to add to the cart or
select all

  1. MikroTik LtAP Mini Series 2.4GHz 802.11b/g/n Dual-Chain 1.5dBi Access Point Without LTE card MikroTik LtAP Mini Series 2.4GHz 802.11b/g/n Dual-Chain 1.5dBi Access Point Without LTE card

    Regular Price: $89.00

    Special Price: $74.00

  2. MikroTik DINrail PRO Mounting Bracket for LtAP mini series MikroTik DINrail PRO Mounting Bracket for LtAP mini series

    Regular Price: $9.00

    Special Price: $6.75

  3. MikroTik LtAP Weatherproof Wireless 2.4-5GHz Dual-Band Access Point w/Built in GPS (without LTE card) MikroTik LtAP Weatherproof Wireless 2.4-5GHz Dual-Band Access Point w/Built in GPS (without LTE card)

    Regular Price: $129.00

    Special Price: $107.50

MikroTik LtAP mini LTE kit has a special enclosure with with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses
or trains. External GPS antenna is available for ordering separately (not included, product code GPSANT). Use the built in GPS module to track the location of your vehicle in real time, we have even provided a simple
tracking application example in the RouterOS documentation, to help you start development of your platform. INTL

SKU RB912R-2nD-LTm&R11e-LTE
Manufacturer MikroTik
Country of Manufacture Latvia
Large or Oversize Package N/A
HTS Code 8517.69.0000

Back to top