(888) 929-3610
Affordable Wireless Solutions

Wireless

Wireless

Ubiquiti features the latest Wi-Fi 802.11ac in a redifined industry and is ideal for deployment of maximum-performance wireless networks. Unifi virtual control plane allows for unlimited scalability under one centralized controller.

Items 21 to 30 of 39 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction
  1. UAP-nanoHD-3 Ubiquiti Unifi nanoHD 802.11ac 2.4/5GHz Wave2 4x4MU-MIMO Access Point 3-Pack (PoE Injector Not Included)

    Ubiquiti Unifi nanoHD 802.11ac 2.4/5GHz Wave2 4x4MU-MIMO Access Point 3-Pack (PoE Not Included)

    Regular Price: $525.00

    Special Price: $458.00

    Ubiquiti UniFi nanoHD is a 4x4 MU-MIMO 802.11ac Wave2 Access Point. It runs on 2.4 GHz (300Mbps max PHY rate), 4x4 MU-MIMO on 5GHz (1733Mbps max PHY rate). It also comes with the same mount as the UAP-AC-Lite. It combines the performance increase from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi nano HD AP delivers up to 125x greater performance than a typical Wave 1AP PoE Not Included in 3-Pack
    Product Specificiations
    • Dimensions: 160 x 160 x 32.65 mm (6.3 x 6.3 x 1.29") • Weight: 300 g (10.6 oz) • Weight with Mounting kit: 315 g (11.1 oz) • Networking Interface: (1) 10/100/1000 Ethernet Port • Buttons: (1) Reset • Power Method: 802.3af PoE • Supported Voltage Range: 44 to 57VDC • Power Supply: UniFi Switch (PoE) (48V, 0.5A) • Max. Power Consumption: 10.5W • Operating Frequency: 2.4 GHz, 5 GHz • Max. TX Power: 2.4 Ghz - 23 dBm; 5 GHz - 26 dBm • Antenna Gain: 2.4 GHz at 2.8 dBi, 5 GHz - 3 dBi • MIMO: 2.4 GHz - 2x2, 5 GHz - 4x4 • Radio Rates: 2.4GHz - 300 Mbps; 5GHz - 1733 Mbps • Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2 • Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) • BSSID: 8 per Radio • Mounting: Wall / Ceiling (kit included) • Operating Temperature: -10 to 70° C (14 to 158° F) • Operating Humidity: 5 to 95% Noncondensing • Certfications: CE, FCC, IC
    Advanced Traffic Management
    • VLAN: 802.1Q • Advanced QoS: Per-User Rate Limiting • Guest Traffic Isolation: Supported • WMM: Voice, Video, Best Effort, and Background • Concurrent Clients: 200+
    Supported Data Rates
    • 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps • 802.11n: 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) • 802.11ac: 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) • 802.11b: 1, 2, 5.5, 11 Mbps • 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
    Product Includes
    • (3) Ubiquiti Access Point nanoHD • (3) Mounting Bracket • (3) Ceiling Bracket Plate • (12) Screws • (12) Flat Head Screws • (12) Keps Nuts • (12) Screw Anchors • (3) Quick Start Guide
    Product Documentation
    Ubiquiti nanoHD Access Point Data Sheet Ubiquiti nanoHD Access Point Quick Start Guide Learn More »
  2. UAP‑AC‑PRO Ubiquiti UniFi 802.11ac PRO Indoor/Outdoor 2.4/5GHz AP

    Ubiquiti UniFi 802.11ac PRO Indoor/Outdoor 2.4/5GHz AP (3x3 MiMO) 5-Pack

    Regular Price: $699.00

    Special Price: $616.75

    Ubiquiti Networks UniFi professional indoor or outdoor WiFi access point supports 802.11ac and speeds of up to 1300Mbps in the 5GHz radio band and up to 450Mbps in the 2.4GHz radio band. The UAP‑AC‑PRO offers simultaneous dual-band operation with 3x3 MiMO on both radio bands. It has a range of up to 122m (400ft) and two Gigabit Ethernet ports.
    Up to 5X Faster with Dual-Radio 3x3 11AC MiMO Technology
    Versatile Design
    The UniFi AC Pro AP is a gigabit, 802.3af-powered access point suitable for indoor or outdoor use. You can easily replace a standard UniFi AP using the same mounting hardware. AC Pro Features
    Scalable Enterprise Wi-Fi Management
    The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field. Technical Specifications • Networking Interface: (2) 10/100/1000 Ethernet Ports • Antennas: (3) Dual-Band Antennas, 3 dBi Each • Max TX Power: 2.4GHz: 22 dBm - 5GHz: 22 dBm • Buttons: Reset • Wifi Standards: 802.11 a/b/g/n/ac • Power Method: Passive Power over Ethernet (48V), 802.3af/803.2at Supported (Supported Voltage Range: 44 to 57VDC) • Power Supply: 48V, 0.5A PoE Gigabit Adapter (Not Included) • Maximum Power Consumption: 9W, (20W with optional accessory) • BSSID: Up to Four Per Radio • Power Save: Supported • Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) • Certifications: CE, FCC, IC • Mounting: Wall and Ceiling • Operating Temperature: -10 to 70°C (14 to 158°F) • Operating Humidity: 5 to 95% non-condensing Advanced Traffic Management • VLAN: 802.1Q • Advanced QoS: Per-User Rate Limiting • Guest Traffic Isolation: Supported • WMM: Voice, Video, Best Effort and Background • Concurrent Clients: 200+

    **PoE Sold Separately** The recommended PoE for this product is POE-48-24W-G.

    Technical Information and Support UAP‑AC‑PRO Data Sheet UAP‑AC‑PRO Quick Start Guide Technical Support Learn More »
  3.  
    UAPACLITE5-ES8XP-USG US Ubiquiti UniFi Wi-Fi 5GHz 2x2 MIMO Access Point LAN Network Solution Starter Kit US

    Ubiquiti UniFi Indoor Wi-Fi 5GHz 2x2 MIMO Access Point LAN Network Solution Starter Kit US

    From: $655.75

    To: $838.75

    This product is a US version, intended for use in the US and Canada. This US version contains the following frequencies 2.4GHz & 5GHz. If you are an international customer, seeking the International version, please contact us at sales@balticnetworks.com or call our Sales Line 1-800-929-3610. Si usted está buscando productos Ubiquiti version international de exportación contáctenos a sales@balticnetworks.com o llámanos a 1-800-929-3610 Ubiquiti UniFi Wi-Fi 5GHz 2x2 MIMO Access Point LAN Network Solution Starter Kit. US Version This starter kit is ideal for wireless network throughout a building, office, school, etc. US
    UniFi LAN Network Solution Starter Kit
    (5) UniFi AC AP Lite (UAP-AC-LITE-5) (1) UniFi Enterprise Gateway Router (USG) (1) EdgeSwitch 8-Port (ES-8XP)
    UniFi AP AC Lite Overview
    Ubiquiti UniFi AC Lite AP features the latest Wi-Fi 802.11ac technology in a refined industrial design and is ideal for cost-effective deployment of high-performance wireless networks.UniFi is the revolutionary Wi-Fi system that combines enterprise performance, unlimited scalability, and a central management controller. UniFi 802.11AC Dual-Radio Access Points (APs) have a refined industrial design and can be easily installed using the included mounting hardware. The UniFi AC Lite AP delivers 5x the performance of the first-generation UniFi AP while still maintaining Ubiquiti’s disruptive pricing strategy. (Does not included PoE)
    UniFi AP AC Lite Specifications
    • 2.4 GHz Speed 300Mbps • 5 GHz Speed 867Mbps • (1) 10/100/1000 Ethernet • 802.11ac Dual Radio Access Point • 24V Passive PoE • 802.11 a/b/g/n/ac Wi-Fi Standards • Range of up to 400' • UniFi Controller Software • Integrated Omni Antennas • Guest Portal/Hotspot Support • Passive Power over Ethernet • 200+ Concurrent Clients • Reset Button • CE, FCC, IC Certified
    Product Includes
    (5) UniFi AP AC Lite (5) Mounting Brackets (5) Ceiling Backing Plate (20) Flat Head Screws (20) Keps Nuts (20) Screws (20 Screw Anchors (1) Quick Start Guide (PoEs Not Included) Technical Information and Support UAP-AC-LITE Data Sheet UAP-AC-LITE Quick Start Guide Technical Support
    EdgeSwitch 8XP Overview
    Ubiquiti EdgeMAX EdgeSwitch 8XP, PoE is an advanced gigabit PoE managed switch. Ubiquiti introduces the Advanced Power over Ethernet Switches, EdgeSwitch XP from Ubiquiti Networks. EdgeSwitch XP delivers reliable passive PoE and fast 10/100/1000 Mbps connectivity to attached Ubiquiti devices and other devices that support passive PoE. To connect your PoE devices, simply enable PoE in the easy-to use EdgeSwitch XP Configuration Interface. Each port can be individually configured to provide PoE, so both PoE and non-PoE devices can be connected.
    EdgeSwitch 8XP Specifcations
    • Dimensions: 210 x 185 x 41 mm • Weight: 1.24 kg • Power Input: 110-120VAC / 210-230VAC • Max. Power Consumption: 150 W • PoE Out Voltage Range: 45-48VDC / 22-24VDC • Max. PoE Wattage: Per Data Port 11.5 W (24 V), 23 W (48V) • ESD Rating: 24 kV Air / 24 kV Contact • PoE: Method Passive • USB Port: 2.0 Type A (Reserved for Future Use) • Processor: MIPS 24K, 400 MHz • System Memory: 64 MB • Code Storage: 8 MB • Certifications: CE, FCC, IC • Operating Temperature: -25 to 55°C (-13 to 131° F) • Operating Humidity: 90% Non-Condensing • PoE: Configurable Per Port • Data Ports: Off/24V/48V • Management Port: Power/Link/Activity • Data Ports: PoE, Speed/Link/Activity • Management Port: (1) 10/100 Ethernet Port • Data Ports: (8) 10/100/1000 Ethernet Ports
    Product Includes
    • (1) EdgeSwitch 8XP • (1) Power Cord • (1) Quick Start Guide
    Product Documentation
    Ubiquiti EdgeSwitch 8XP Data Sheet Ubiquiti EdgeSwitch 8XP Quick Start Guide
    UniFi USG Overview
    UniFi Enterprise Gateway Router with Gigabit Ethernet from Ubiquiti Networks is designed to be implemented with compatible UniFi Enterprise Systems to provide routing and security to your local area network. With three Gigabit Ethernet ports and the ability to route up to 1 million packets per second this gateway is a versatile networking tool. Features such as an improved user experience and the ability to obtain an overview of your network allow you to manage nearly every aspect from mapping out subnets to provisioning additional UniFi devices. You can even create LAN & WLAN groups per UniFi device for greater control over large network deployments. UniFi USG Security Gateway • Dual-Core 500 MHz Processor • 2 GB On-Board Flash Memory • Wall Mountable Design • 1 x RJ-45 Serial Console Port • 3 x Gigabit Ethernet Ports • 1 million packets per second for 64-byte packets • 3 Gb/s total line rate for packets 512 bytes or larger • Integrated and managed with UniFi Controller v4.x • Secure off-site management and monitoring • CLI management for advanced users • Silent, fanless operation Product Includes (1) Power Adapter (12V, 1A) (1) Power Cord (2) Screws (2) Screw Anchors (1) Quick Start Guide
    Datasheet and Quick Start Guide USG Datasheet USG Quick Start Guide Learn More »
  4. UAP-AC-M-PRO 4-Pack Ubiquiti UniFi 802.11ac Mesh Pro Outdoor 2.4/5GHz AP (4-Pack)

    Ubiquiti UniFi 802.11ac Mesh Pro Outdoor 2.4/5GHz AP (4-Pack) US

    $691.00

    This Product is a 4-Pack. Ubiquiti UAP-AC-M-PRO is the pro version of their mesh access points. It can provide coverage to large outdoor areas, such as a park, using a mesh network comprised of mesh access points. This UAP-AC-M-PRO is ideal for applications requiring 3x3 MIMO data rates for close-in omni coverage. The nature of these devices allows for quick outdoor installations and takedowns, without needing prior infrastructure. Product Features • Weather-Resistant Form Factor: The enclosure of the UniFi AC Mesh Pro AP is designed to withstand the elements, making it deal for outdoor deployment. • LED: Unique provisioning LED provides administrator location tracking and alerts for each device. • Powerful Coverage: Built-in dual-band omnidirectional antennas deliver expanded range coverage outdoors. • Mounting Flexibility: The UniFi AC Mesh Pro AP can be mounted on a wall or pole. (all accessories are included). • Dual Gigabit Ethernet Ports: The primary port is for data and PoE; the secondary port is for bridging. • Multiple Power Options: You can power the UniFi AC Mesh Pro AP with an 802.3af compatible switch, UniFi PoE Switch, or the included Gigabit PoE adapter. We recommend powering your UniFi devices with a UniFi PoE Switch. Product Specifications • Dimensions: 343.2 x 181.2 x 60.2 mm (13.51 x 7.13 x 2.37 ") • Weight: 633 g (1.40 lbs) • Networking Interface: (2) 10/100/1000 Ethernet Ports • Buttons: Reset • Power Method: 802.3af PoE (Supported Voltage Range: 44 to 57 VDC) • Power Supply: 48V, 0.5A PoE Gigabit Adapter (Included) • Maximum Power Consumption: 9 W • Maximum TX Power:     2.4 GHz: 22 dBm     5 GHz: 22 dBm • Antennas: (3) Internal Dual-Band Antennas, 8 dBi • Wi-Fi Standards: 802.11a/b/g/n/ac • Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) • BSSID: Up to Four per Radio • Mounting: Wall/Pole (Pole Kit Included) • Operating Temperature: -40 to 70°C (-40 to 158°F) • Operating Humidity: 5 to 95% non-condensing • Certifications: CE, FCC, IC Advanced Traffic Management • VLAN: 802.1Q • Advanced QoS: Per-User Rate Limiting • Guest Traffic Isolation: Supported • WMM: Voice, Video, Best Effort, and Background • Concurrent Clients: 200+' Supported Data Rates (Mbps) • 802.11ac: 6.5 to 1300 Mbps (MCS0 - MCS9 NSS1/2/3/, VHT 20/40/80) • 802.11n: 6.5 to 450 Mbps (MCS0 - MCS23, HT 20/40) • 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps • 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps • 802.11b: 1, 2, 5.5, 11 Mbps Product Documentation UAP-AC-M-PRO Learn More »
  5.  
    UAP-AC-EDU US 2-Pack Ubiquiti UniFi 802.11ac EDU Indoor 2.4/5GHz AP (3x3 MiMO) (2-Pack)

    Ubiquiti UniFi 802.11ac EDU Indoor 2.4/5GHz AP (3x3 MiMO) (2-Pack)

    $701.00

    Out of stock

    This product is a 2-pack. Ubiquiti's dual-radio AP WiFi access point supports 802.11ac and speeds of up to 1300Mbps in the 5GHz radio band and up to 450Mbps in the 2.4GHz radio band. The UAP‑AC‑EDU offers simultaneous dual-band operation with 3x3 MiMO on both radio bands. It has a range of up to 122m (400ft) and one Gigabit Ethernet port. It also features a public address system on board.
    UniFied Wi-Fi and Public Address System Integration
    Make announcements over Wi-Fi — no separate hardware needed. AC EDU Features
    Dual-Radio 3x3 MiMO
    The UniFi AC EDU AP supports simultaneous dual-band, 3x3 MIMO technology in the 2.4 and 5 GHz radio bands for up to 1750 Mbps.
    Mobile Announcement App
    Broadcast announcements with clarity from your iOS or Android-based device using the Ubiquiti UniFi Broadcast app. Technical Specifications • Networking Interface: (1) 10/100/1000 Ethernet Ports • Antennas: (3) Dual-Band Antennas, 3 dBi Each • Max TX Power: 2.4GHz: 22 dBm - 5GHz: 22 dBm • Buttons: Reset • Wifi Standards: 802.11 a/b/g/n/ac • Power Method: Passive Power over Ethernet (48V), 803.2at Supported (Supported Voltage Range: 44 to 57VDC) • Power Supply: 48V, 0.5A PoE Gigabit Adapter • Maximum Power Consumption: 20W • BSSID: Up to Four Per Radio • Power Save: Supported • Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) • Certifications: CE, FCC, IC • Mounting: Wall and Ceiling • Operating Temperature: -10 to 70°C (14 to 158°F) • Operating Humidity: 5 to 95% non-condensing Advanced Traffic Management • VLAN: 802.1Q • Advanced QoS: Per-User Rate Limiting • Guest Traffic Isolation: Supported • WMM: Voice, Video, Best Effort and Background • Concurrent Clients: 200+ Loudspeaker Acoustics • Sensitivity: 94 dB (1W/1 m) • Maximum SPL: 103 dB @ 1 m • Frequency Response: 100 - 20,000 Hz • Type: Two-Way Speaker with Second-Order HP Filter Microphone Acoustics • Sensitivity: -40 dB • Polar Pattern: Omni • Frequency Response: 50 - 20,000 Hz Technical Information and Support UAP‑AC‑EDU Data Sheet Technical Support Learn More »
  6. UAP-XG Ubiquiti UniFi XG 802.11ac 2.4/5GHz Wave2 4x4MU-MIMO 1500 Client Capacity Access Point  Front

    Ubiquiti UniFi XG 802.11ac 2.4/5GHz Wave2 4x4MU-MIMO 1500 Client Capacity Access Point

    Regular Price: $720.99

    Special Price: $705.50

    Ubiquiti UniFi XG AP 802.11ac Wave 2 MU‑MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP, such as the UniFi XG AP, to communicate with multiple clients at the same time – significantly increasing multi‑user throughput and overall user experience. Wave 1 and Wave 2 APs offer 28 independent (non‑overlapping) channels: three for the 2.4 GHz band and twenty-five for 5 GHz, including DFS channels. With the advantages of MU-MIMO technology and 4x4 spatial streams, the UniFi XG AP can support more than triple the number of users2 per radio than a typical Wave 1 AP. Expand your 10-Gigabit network with the UniFi XG Access Point, part of the Ubiquiti Networks UniFi Enterprise Wi-Fi System.
    Product Features
    • 10 Gigabit Ethernet Support • 4x4 MU-MIMO Quad-Radio: (3) client, 1 Security • Dual 5 GHz 802.11ac Wave 2 Radios • 3.466 Gbps Combined Radio Rate in 5 GHz • 800 Mbps Radio Rate in 2.4 GHz • Dedicated Security Radio with Persistent Threat Management • 1,500 Client Association Limit • 802.3bt Power Injector Included • Frequency Range: 2402-2480Mhz • Input: 100-240V-50/60Hz, Max .075A; Output: 48V, 0.5A
    Product Specifications
    • Dimensions: 228 x 228 x 50 mm (8.98 x 8.98 x 1.97") • Weights: 1.20 kg (2.65 lb) • Weight w/Mounting Kit: 1.35 kg (2.98 lb) • Networking Interface:       (1) 10/100/1000 Ethernet Port       (1) 1/10 Gbps ICM Ethernet Port • Buttons: Reset • Power Method: 802.3bt PoE • Supported Voltage Range: 44 to 57VDC • Power Supply: PoE Injector 50VDC, 1.2A Gigabit • Power Save: Supported • Maximum Power Consumption: 31W • Radios: 2.4 GHz, (2) 5 GHz, Security • Maximum TX Power 2.4GHz: 25 dBm • Maximum TX Power 5GHz: 25dBm • Antennas 2.4 GHz: (2) Dual-Port, Dual-Polarity Antennas, 6 dBi each • Antennas: 5GHz: (2) Dual-Port, Dual-Polarity Antennas, 8 dBi each • Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2 • Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11 w/PMF • BSSID: Up to 8 per Radio • Mounting: Wall/Ceiling/Junction Box (Kits Included) • Operating Temperature: -10 to 60° C (14 to 140° F) • Operating Humidity: 5 to 95% Noncondensing • Certifications: CE, FCC, IC • VLAN: 802.1Q • Advanced QoS: Per-User Rate Limiting • Guest Traffic Isolation: Supported • WMM: Voice, Video, Best Effort, and Background • Concurrent Clients: 1500 • 802.11ac: 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80) • 802.11n: 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) • 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps • 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps • 802.11b: 1, 2, 5.5, 11 Mbps
    Product Includes
    (1) XG Access Point (1) 802.3bt Power Injector (1) Mounting Kit (1) User Guide
    Product Documentation
    UAP-XG Datasheet Learn More »
  7.  
    UAP-nanoHD-5 Ubiquiti Unifi nanoHD 802.11ac 2.4/5GHz Wave2 4x4MU-MIMO Access Point 5-Pack (PoE Not Included)

    Ubiquiti Unifi nanoHD 802.11ac 2.4/5GHz Wave2 4x4MU-MIMO Access Point 5-Pack (PoE Not Included)

    Regular Price: $875.00

    Special Price: $776.50

    Ubiquiti UniFi nanoHD is a 4x4 MU-MIMO 802.11ac Wave2 Access Point. It runs on 2.4 GHz (300Mbps max PHY rate), 4x4 MU-MIMO on 5GHz (1733Mbps max PHY rate). It also comes with the same mount as the UAP-AC-Lite. . It combines the performance increase from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi nano HD AP delivers up to 125x greater performance than a typical Wave 1AP. 5-Pack PoE Not Included In 5-Pack
    Product Specificiations
    • Dimensions: 160 x 160 x 32.65 mm (6.3 x 6.3 x 1.29") • Weight: 300 g (10.6 oz) • Weight with Mounting kit: 315 g (11.1 oz) • Networking Interface: (1) 10/100/1000 Ethernet Port • Buttons: (1) Reset • Power Method: 802.3af PoE • Supported Voltage Range: 44 to 57VDC • Power Supply: UniFi Switch (PoE) (48V, 0.5A) • Max. Power Consumption: 10.5W • Operating Frequency: 2.4 GHz, 5 GHz • Max. TX Power: 2.4 Ghz - 23 dBm; 5 GHz - 26 dBm • Antenna Gain: 2.4 GHz at 2.8 dBi, 5 GHz - 3 dBi • MIMO: 2.4 GHz - 2x2, 5 GHz - 4x4 • Radio Rates: 2.4GHz - 300 Mbps; 5GHz - 1733 Mbps • Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2 • Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) • BSSID: 8 per Radio • Mounting: Wall / Ceiling (kit included) • Operating Temperature: -10 to 70° C (14 to 158° F) • Operating Humidity: 5 to 95% Noncondensing • Certfications: CE, FCC, IC
    Advanced Traffic Management
    • VLAN: 802.1Q • Advanced QoS: Per-User Rate Limiting • Guest Traffic Isolation: Supported • WMM: Voice, Video, Best Effort, and Background • Concurrent Clients: 200+
    Supported Data Rates
    • 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps • 802.11n: 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) • 802.11ac: 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) • 802.11b: 1, 2, 5.5, 11 Mbps • 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
    Product Includes
    • (5) Ubiquiti Access Point nanoHD • (5) Mounting Bracket • (5) Ceiling Bracket Plate • (20) Screws • (20) Flat Head Screws • (20) Keps Nuts • (20) Screw Anchors • (5) Quick Start Guide
    Product Documentation
    Ubiquiti nanoHD Access Point Data Sheet Ubiquiti nanoHD Access Point Quick Start Guide Learn More »
  8.  
    UAP-AC-LITE US 10-Pack Ubiquiti UniFi 802.11ac LITE Indoor 2.4/5GHz AP (10-Pack)

    Ubiquiti UniFi 802.11ac LITE Indoor 2.4/5GHz AP (10-Pack)

    $780.00

    This product is a 10-Pack. Ubiquiti's lite indoor WiFi access point supports 802.11ac and speeds of up to 867Mbps in the 5GHz radio band and up to 300Mbps in the 2.4GHz radio band. The UAP-AC-LITE offers simultaneous dual-band operation with 2x2 MiMO technology for each band. It has a range of up to 122m (400ft) and one Gigabit Ethernet ports.
    Dual-Radio Performance, Gigabit Speeds
    The UniFi AC Lite AP delivers 5x the performance of the first-generation UniFi AP while still maintaining Ubiquiti’s disruptive pricing strategy.
    Sleek, Ultra-Compact Design
    The UniFi AC Lite AP features a cleaner design in a reduced footprint – half the size compared to the standard UniFi AP.
    Scalable Enterprise Wi-Fi Management
    The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field. Technical Specifications • Networking Interface: (1) 10/100/1000 Ethernet Ports • Antennas: (2) Dual-Band Antennas, 3 dBi Each • Max TX Power: 2.4GHz: 20 dBm - 5GHz: 20 dBm • Buttons: Reset • Wifi Standards: 802.11 a/b/g/n/ac • Power Method: Passive Power over Ethernet (24V), (Pairs 4, 5+; 7, 8 Return) • Power Supply: 24V, 0.5A Gigabit PoE Adapter • Maximum Power Consumption: 6.5W • BSSID: Up to Four Per Radio • Power Save: Supported • Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) • Certifications: CE, FCC, IC • Mounting: Wall and Ceiling • Operating Temperature: -10 to 70°C (14 to 158°F) • Operating Humidity: 5 to 95% non-condensing Advanced Traffic Management • VLAN: 802.1Q • Advanced QoS: Per-User Rate Limiting • Guest Traffic Isolation: Supported • WMM: Voice, Video, Best Effort and Background Technical Information and Support UAP-AC-LITE Data Sheet UAP-AC-LITE Quick Start Guide Technical Support Learn More »
  9. UAP-AC-IW-PRO-5 Ubiquiti UniFi In-Wall 2.4 / 5GHz AC Pro Access Point (5-Pack)

    Ubiquiti UniFi In-Wall 2.4 / 5GHz AC Pro Access Point (5-Pack)

    Regular Price: $999.99

    Special Price: $828.50

    This product is a 5-pack. Ubiquiti Networks UAP-AC-IW-PRO-5 is a 5-pack of in-wall 802.11ac Wi-Fi access points featuring (3) Gigabit Ethernet ports; (1) PoE in + data port, (1) PoE out + data, and (1) data only. Product Specifications • Dimensions: 139.7 x 86.7 x 25.75mm (5.5 x 3.41 x 1.01") • Weight: 210g (7.41oz) • (3) 10/100/1000 Ethernet Ports • Buttons: Reset • Power Method: 802.3at PoE+ Supported • Power Supply: UniFi PoE Switch (Not Included) • Power Save: Supported • PoE Out: 48V Pass-Through (Pins 1,2+; 3,60) • Maximum Power Consumption: 10W (22W w/ PoE Passthrough) • Maximum TX Power:     2.4GHz: 22dBm     5GHz: 22dBm • MiMO:     2.4GHz: 3x3     5GHz: 3x3 • Max Data Speed:     2.4GHz: 450Mbps     5GHz: 1300Mbps • Max Range: 100m (328') • Antennas: (3) Dual-Band Antenna, Single-Polarity     2.4GHz: 5dBi     5GHz: 6dBi • Wi-Fi Standards: 802.11a/b/g/n/ac • Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP, AES) • BSSID: Up to Four per Radio • Mounting: 1-Gang Electrical Wall Box (not included) • Operating Temperature: -10 to 50°C (14 to 122°F) • Operating Humidity: 5 to 95% non-condensing • Certifications: CE, FCC, IC • VLAN: 802.1Q • Advanced QoS: Per-User Rate Limiting • Guest Traffic Isolation: Supported • WMM: Voice, Video, Best Effort, and Background • Concurrent Clients: 250+ Learn More »
  10.  
    UAP-AC-M-PRO-5 Ubiquiti UniFi 802.11ac Mesh Pro Outdoor 2.4/5GHz AP (5-Pack)

    Ubiquiti UniFi 802.11ac Mesh Pro Outdoor 2.4/5GHz AP (5-Pack) US

    Regular Price: $975.00

    Special Price: $871.25


    This product is a 5 pack and does not come with PoE injectors

    Ubiquiti Networks UniFi UAP-AC-M-PRO is the pro version of their mesh access points. It can provide coverage to large outdoor areas, such as a park, using a mesh network comprised of mesh access points. This UAP-AC-M-PRO is ideal for applications requiring 3x3 MIMO data rates for close-in omni coverage. The nature of these devices allows for quick outdoor installations and takedowns, without needing prior infrastructure. Product Features • Weather-Resistant Form Factor: The enclosure of the UniFi AC Mesh Pro AP is designed to withstand the elements, making it deal for outdoor deployment. • LED: Unique provisioning LED provides administrator location tracking and alerts for each device. • Powerful Coverage: Built-in dual-band omnidirectional antennas deliver expanded range coverage outdoors. • Mounting Flexibility: The UniFi AC Mesh Pro AP can be mounted on a wall or pole. (all accessories are included). • Dual Gigabit Ethernet Ports: The primary port is for data and PoE; the secondary port is for bridging. • Multiple Power Options: You can power the UniFi AC Mesh Pro AP with an 802.3af compatible switch, UniFi PoE Switch, or the included Gigabit PoE adapter. We recommend powering your UniFi devices with a UniFi PoE Switch. Product Specifications • Dimensions: 343.2 x 181.2 x 60.2 mm (13.51 x 7.13 x 2.37 ") • Weight: 633 g (1.40 lbs) • Networking Interface: (2) 10/100/1000 Ethernet Ports • Buttons: Reset • Power Method: 802.3af PoE (Supported Voltage Range: 44 to 57 VDC) • Power Supply: 48V, 0.5A PoE Gigabit Adapter • Maximum Power Consumption: 9 W • Maximum TX Power:     2.4 GHz: 22 dBm     5 GHz: 22 dBm • Antennas: (3) Internal Dual-Band Antennas, 8 dBi • Wi-Fi Standards: 802.11a/b/g/n/ac • Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) • BSSID: Up to Four per Radio • Mounting: Wall/Pole (Pole Kit Included) • Operating Temperature: -40 to 70°C (-40 to 158°F) • Operating Humidity: 5 to 95% non-condensing • Certifications: CE, FCC, IC Advanced Traffic Management • VLAN: 802.1Q • Advanced QoS: Per-User Rate Limiting • Guest Traffic Isolation: Supported • WMM: Voice, Video, Best Effort, and Background • Concurrent Clients: 200+' Supported Data Rates (Mbps) • 802.11ac: 6.5 to 1300 Mbps (MCS0 - MCS9 NSS1/2/3/, VHT 20/40/80) • 802.11n: 6.5 to 450 Mbps (MCS0 - MCS23, HT 20/40) • 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps • 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps • 802.11b: 1, 2, 5.5, 11 Mbps • (5) UniFi AP Mesh Pro • (5) Mounting Bracket • (10) Pole Clamps • (20) Carriage Bolts • (20) Flange Nuts • (20) Screws • (20) Screw Anchors Product Documentation UAP-AC-M-PRO-5 Learn More »

Items 21 to 30 of 39 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction

Back to top