(888) 929-3610
Affordable Wireless Solutions

PowerBeam AC

PowerBeam AC

Ubiquiti Networks has incorporated a dish reflector design with proprietary airMAX ac technology, the PowerBeam AC is idea for CPE deployments requiring maximum performance. Featuring enhanced protection against ESD events, the PowerBeam

Items 1 to 10 of 21 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1.  
    PBE-5AC-Gen2 Ubiquiti airMAX PowerBeam Gen 2 5AC 5GHz Bridge INTL

    Ubiquiti airMAX PowerBeam Gen 2 5AC 5GHz Bridge INTL

    Regular Price: $119.00

    Special Price: $109.25

    PBE-5AC-Gen2 This product is for export only. Customers in the US and Canada are advised to use part number: PBE-5AC-Gen2-US PBE-5AC-Gen2 from Ubiquiti Networks is an airMAX PowerBeam 5GHz Gen 2 device, featuring a built-in Wi-Fi radio for easy remote setup an accessibility. The Ubiquiti Networks airMAX PowerBeam Gen 2 is an ideal product for CPE deployments requiring maximum performance. Utilizing InnerFeed technology to integrate the radio into the feedhorn of the antenna, there is now need for extra cables, improving performance thanks to no cable loss. It requires no tools for assembly, requiring only a single wrench for pole-mounting. Product Specifications • Dimensions: 420 x 420 x 230mm (16.54 x 16.54 x 9.06") • Weight: 2.22kg (4.89lbs) • Power Supply: 24V, 0.5A Gigabit PoE Adapter (included) • Max. Power Consumption: 8.5W • Power Method: Passive PoE (Pairs 4,5+;7,8 Return) • Supported Voltage Range: 20 to 26VDC • Gain: 25dBi • Networking Interface: (1) 10/100/1000 Ethernet Port • Processor Specs: MIPS 74Kc • Memory: 64MB • LEDs: Power, Ethernet, (4) Signal Strength • Channel Sizes:     PtP Mode: 10/20/30/40/50/60/80MHz     PtMP Mode: 10/20/30/40MHz • Enclosure Characteristics:     Antenna Feed: Outdoor UV Stabilized Plastic     Dish Reflector: Powder-Coated SPCC • Mounting: Pole-Mounting Kit (included) • Wind Loading: 380N @ 200km/h (85.4lbf @ 125mph) • Wind Survivability: 200km/h (125mph) • ESD/EMP Protection: Air: ±24kV / Contact: ±24kV • Operating Temperature: -40 to 70°C (-40 to 158°F) • Operating Humidity: 5 to 95% non-condensing • RoHS Compliance: Yes • Salt Fog Test: IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 • Vibration Test: IEC 68-2-6 • Temperature Shock Test: IEC 68-2-14 • UV Test: IEC 68-2-5 at 40°C (104°F), Equivalent: ETS 300 019-1-4 • Wind-Driven Rain Test: ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 • Certifications: CE, FCC, IC • Operating Frequency: 5150 - 5875MHz • Management Radio: 2.4GHz Product Includes: • (1) Dish Reflector • (1) Antenna Feed • (1) Rear Housing • (1) Adjustment Bracket • (1) Mounting Bracket • (4) Hex Bolts with Washers • (1) Pole Clamp • (2) Long Carriage Bolts • (2) Flange Nuts • (1) Gigabit PoE (24V, 0.5A) with Mounting Bracket • (1) Power Cord • (1) Quick Start Guide Product Documentation PBE-5AC-Gen2 Datasheet PBE-5AC-Gen2 Quick Start Guide Learn More »
  2.  
    PBE-5AC-Gen2 US Ubiquiti airMAX PowerBeam Gen 2 5AC 5GHz Bridge US

    Ubiquiti airMAX PowerBeam Gen 2 5AC 5GHz Bridge US

    Regular Price: $119.00

    Special Price: $110.00

    This product is a US version, intended for use in the US and Canada. This US version contains the following frequencies 5150-5250 MHz*, 5250-5350 MHz*, 5470-5725 MHz*, 5725-5850 MHz. If you are an international customer, seeking the International version, please contact us at sales@balticnetworks.com or call our Sales Line 1-800-929-3610. Si usted está buscando productos Ubiquiti version international de exportación contáctenos a sales@balticnetworks.com o llámanos a 1-800-929-3610 PBE-5AC-Gen2 * Some frequencies may require activation; visit: here The Ubiquiti Networks airMAX PowerBeam Gen 2 is an ideal product for CPE deployments requiring maximum performance. Utilizing InnerFeed technology to integrate the radio into the feedhorn of the antenna, there is now need for extra cables, improving performance thanks to no cable loss. It requires no tools for assembly, requiring only a single wrench for pole-mounting. Product Specifications • Dimensions: 420 x 420 x 230mm (16.54 x 16.54 x 9.06") • Weight: 2.22kg (4.89lbs) • Power Supply: 24V, 0.5A Gigabit PoE Adapter (included) • Max. Power Consumption: 8.5W • Power Method: Passive PoE (Pairs 4,5+;7,8 Return) • Supported Voltage Range: 20 to 26VDC • Gain: 25dBi • Networking Interface: (1) 10/100/1000 Ethernet Port • Processor Specs: MIPS 74Kc • Memory: 64MB • LEDs: Power, Ethernet, (4) Signal Strength • Channel Sizes:     PtP Mode: 10/20/30/40/50/60/80MHz     PtMP Mode: 10/20/30/40MHz • Enclosure Characteristics:     Antenna Feed: Outdoor UV Stabilized Plastic     Dish Reflector: Powder-Coated SPCC • Mounting: Pole-Mounting Kit (included) • Wind Loading: 380N @ 200km/h (85.4lbf @ 125mph) • Wind Survivability: 200km/h (125mph) • ESD/EMP Protection: Air: ±24kV / Contact: ±24kV • Operating Temperature: -40 to 70°C (-40 to 158°F) • Operating Humidity: 5 to 95% non-condensing • RoHS Compliance: Yes • Salt Fog Test: IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 • Vibration Test: IEC 68-2-6 • Temperature Shock Test: IEC 68-2-14 • UV Test: IEC 68-2-5 at 40°C (104°F), Equivalent: ETS 300 019-1-4 • Wind-Driven Rain Test: ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 • Certifications: CE, FCC, IC • Operating Frequency:     2412 - 2472MHz     USA U-NII-1: 5150 - 5250MHz     USA U-NII-2A: 5250 - 5350MHz     USA U-NII-2C: 5470 - 5725MHz     USA U-NII-3: 5725 - 5850MHz Product Includes: • (1) Dish Reflector • (1) Antenna Feed • (1) Rear Housing • (1) Adjustment Bracket • (1) Mounting Bracket • (4) Hex Bolts with Washers • (1) Pole Clamp • (2) Long Carriage Bolts • (2) Flange Nuts • (1) Gigabit PoE (24V, 0.5A) with Mounting Bracket • (1) Power Cord • (1) Quick Start Guide Product Documentation PBE-5AC-Gen2 US Datasheet PBE-5AC-Gen2 US Quick Start Guide Learn More »
  3.  
    PBE-2AC-400 US Ubiquiti airMAX PowerBeam 2.4GHz 802.11ac High Gain dish CPE 400mm US front

    Ubiquiti airMAX PowerBeam 2.4GHz 802.11ac High Gain dish CPE 400mm US

    Regular Price: $119.00

    Special Price: $113.00

    This product is a US version, intended for use in the US and Canada. This US version contains the following frequencies 2412-2462MHz. If you are an international customer, seeking the International version, please contact us at sales@balticnetworks.com or call our Sales Line 1-800-929-3610. Si usted está buscando productos Ubiquiti version international de exportación contáctenos a sales@balticnetworks.com o llámanos a 1-800-929-3610 Ubiquiti PowerBeam 2AC blocks or spatially filters out noise so noise immunity is improved. The PowerBeam is equipped with a long range Point-to-Point link mode. This PowerBeam airMAX ac products support up to 330+ Mbps real TCP/IP throughput - more than double the throughput of standard airMAX products. Product Specifications: • Frequency: 2412-2462MHz • Management Radio: U-NII-3: 5725-5850MHz • Dimensions: 420 x 420 x 289mm (16.54 x 16.54 x 11.38") • Weight (mount included): 1.795 kg (4.809 lb) • Gain: 18 dBi • Networking Interface: (1) 10/100/1000 Ethernet Port • Enclosure: Outdoor UV Stabilized Plastic • Max. Power Consumption: 7.5W • Power Supply: 24V, 0.5A Gigabit PoE Adapter (Included) • Power Method: Passive PoE (Pairs 4,5+;7,8 Return) • Processor Specs: MIPS 74Kc • Memory: 64MB • LEDs: Power, Ethernet, (4) Signal Strength • Channel Sizes:       PtP Mode 10/20/40MHz - Antenna Feed (Outdoor UV stabilized Plastic enclosure characteristic)       PtMP Mode 10/20/40MHz Dish Reflector - (Powder-Coated SPCC enclosure characteristic) • ESD/EMP Protection: Air: +/- 24 kV, Contact: +/-24kV • RoHS Compliance: Yes • Salt Fod Test: IEC 68-2-11 (ATSM B 117), Equivalent: MIL-STD-810 G Method 509.5 • Supported Voltage Range: 22 to 26VDC • Wind Survivability: 200 km/h (125 mph) • Wind Loading: 342.5 N @ 200 km/h (77 lbf @125 mph) • Mounting: Pole Mounting Kit Included • Operating Temperature: -40 to 70 C (-40 to 158 F) • Operating Humidity: 5 to 95% Noncondensing • Temperature Shock Test: IEC 68-2-14 • Vibration Test: IEC 68-2-6 • UV Test IEC 68-2-5 at 40degC (104degF), Equivalent: ETS 300 019-1-4 • Wind-Driven Rain Test: ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 • Certifications: CE, FCC, IC Product Includes: 1 x Dish Reflector 1 x PBE-2AC-400 Antenna Feed 1 x Rear Housing 1 x Dish Bracket 1 x Pole Clamp 1 x U-Bolt 1 x Flange Nuts (m8, Qty. 2) 1 x Gigabit PoE (24V, 0.5A) with mounting Bracket 1 x Power Cord 1 x Quick Start Guide
    Product Documentation
    PowerBeam-2AC-400 Data Sheet Learn More »
  4.  
    PBE-5AC-400-ISO Ubiquiti PowerBeam ac ISO 5GHz 25dBi 400mm Bridge with RF Isolated Reflector

    Ubiquiti PowerBeam 802.11ac ISO 5GHz 25dBi 400mm Bridge with RF Isolated Reflector INTL

    Regular Price: $129.00

    Special Price: $118.25

    PBE-5AC-400-ISO 5-Pack
    This product is half-link, you need two units to make a bridge link.
    International version: operating frequency 5170-5875MHz. This product is for export only. Customers in the US and Canada are advised to use part number: PBE-5AC-400-ISO-US Ubiquti Networks PBE-5AC-400-ISO is an airMAX PowerBeam half-link operating on 5GHz with 25dBi gain. It has an RF isolation reflector to filter interference. The Ubiquiti Networks PowerBeam ac ISO is an airMAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation. The PowerBeam ac ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. This combination of focused beam directivity and RF isolation, the PowerBeam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. Ubiquiti has an InnerFeed technology that integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ac ISO is extremely versatile and cost‑effective to deploy.
    Product Features:
    • Innovative Mechanical Design • Superior RF Isolation • Advanced Software Technology • airMAX Technology Included Integrated RF Isolator Comparison
    Product Specifications:
    • Processor: Atheros MIPS 74Kc, 560MHz • Memory: 64MB DDR2, 16MB Flash • Networking Interface: 1 x 10/100/1000 Ethernet Port • Power Supply: 24V, 0.5A PoE • Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return) • Supported Voltage Range: 20-26VDC • Max. Power Consumption: 8.5W • Gain: 25dBi • Operating Frequency: 5170-5875MHz • Wind Loading: 210 N @ 200 km/h (47 lbf @ 125 mph) • Wind Survivability: 200 km/h (125 mph) • LEDs (1) Power, (1) LAN, (4) WLAN • Channel Sizes: PtP Mode: 10/20/30/40/50/60/80MHz; PtMP Mode: 10/20/30/40MHz • Polarization: Dual Linear • Enclosure: Outdoor UV Stabilized Plastic • Operating Temperature -40 to 158deg F (-40 to 70deg C) • Operating Humidity: 5 to 95% Non-Condensing
    Product Includes:
    • (1) Reflector • (1) Radome • (1) Antenna Feed • (1) Rear Housing • (1) Mounting Bracket • (1) Adjustment Bracket • (1) Pole Clamp • (4) Hex Bolts with Washer Set • (2) Flange Nuts • (2) Carriage Bolts • (1) PoE Adapter (24V, 0.5A) • (1) Power Cord • (1) Quick Start Guide Datasheet and Quick Start Guide: PBE-5AC-400-ISO Datasheet PBE-5AC-400-ISO Quick Start Learn More »
  5.  
    PBE-5AC-620 Ubiquiti airMAX PowerBeam 5GHz 29dBi 802.11AC AirMax CPE INTL

    Ubiquiti airMAX PowerBeam 5GHz 29dBi 620mm 802.11ac Bridge INTL

    Regular Price: $219.00

    Special Price: $197.50

    International version: operating frequency 5150-5875MHz. This product is for export only. Customers in the US and Canada are advised to use part number: PBE-5AC-620-US NOTE: This product is half-link, you need two units to make a bridge link. Using Ubiquiti Networks airMAX AC technology, the PBE-5AC-620 supports up to 450+ Mbps real TCP/IP throughput up to triple the throughput of standard airMAX products. AirMAX ac supports high data rates, which require dense modulation: 256QAM – a significant increase from 64QAM, which is used in airMAX. Ubiquiti Networks PBE-5AC-620 is an airMAX PowerBeam Bridge device, it utilizes InnerFeed technology to integrate the radio into the feedhorn of the antenna. Product Features: • Processor: Atheros MIPS 74Kc 720MHz • Memory: 128MB DDR2, 8MB Flash • Operating Frequency: 5150-5875Mhz • Channel Size: PtP Mode 10/20/30/40/50/60/80MHz PtMP Mode 10/20/30/40 Mhz • Protocol: 802.11AC • Polarization: Dual Linear • Gain: 29dBi • Operating frequency: International: 5150-5875Mhz USA: 5725-5850Mhz • Power Supply: 24V, 0.5A Gigabit PoE • Max. power consumption: 8.5W • Wind survivability: 200km/h (125mph) • Polarization: Dual linear • ESD/EMP protection: Air: ± 24 kV, Contact: ± 24 kV • Operating temperature: -40 to 70° C (-40 to 158° F) • Operating humidity: 5 to 95% Non-Condensing Product Includes: • (1) Dish Reflector with Mounting Bracket • (1) Antenna Feed • (1) Rear Housing • (1) Support Arm • (1) Upper Pole Bracket Assembly • (1) Lower Pole Bracket • (1) Brace • (4) M6 Screws • (5) M8 Hex Head Bolts • (5) M8 Lock Washers • (5) M8 Flat Washers • (2) Stabilizer Brackets • (2) M10x100 Bolts • (2) M10 Serrated Flange Nuts • (4) M8x150 Carriage Bolts • (2) Pole Clamps • (1) Gigabit PoE Adapter with Wall-Mount Bracket • (1) Power Cord • (1) Quick Start Guide
    Product Documentation PBE-5AC-620 Powerbeam Datasheet Learn More »
  6.  
    PBE-5AC-620 Ubiquiti PowerBeam 5GHz 29dBi 802.11AC AirMax CPE

    Ubiquiti airMAX PowerBeam 5GHz 620mm 29dBi 802.11ac Bridge US

    Regular Price: $219.00

    Special Price: $215.00

    US and Canada version: Operating Frequency: 5150-5250 MHz*, 5250-5350 Mhz*, 5470-5725 Mhz*, 5725-5850 Mhz* * Some frequencies may require activation; visit: here NOTE: This product is half-link, you need two units to make a bridge link.Using Ubiquiti airMAX AC technology, the PBE-5AC-620 supports up to 450+ Mbps real TCP/IP throughput up to triple the throughput of standard airMAX products. AirMAX ac supports high data rates, which require dense modulation: 256QAM – a significant increase from 64QAM, which is used in airMAX. Product Features • Processor: Atheros MIPS 74Kc 720MHz • Memory: 128MB DDR2, 8MB Flash • Channel Size: PtP Mode 10/20/30/40/50/60/80MHz PtMP Mode 10/20/30/40 Mhz • Protocol: 802.11AC • Polarization: Dual Linear • Gain: 29dBi • Operating Frequency: 5150-5250 MHz*, 5250-5350 Mhz*, 5470-5725 Mhz*, 5725-5850 Mhz* ( *Some frequencies may require activation; visit: here ) • Power Supply: 24V, 0.5A Gigabit PoE • Max. power consumption: 8.5W • Wind survivability: 200km/h (125mph) • Polarization: Dual linear • ESD/EMP protection: Air: ± 24 kV, Contact: ± 24 kV • Operating temperature: -40 to 70° C (-40 to 158° F) • Operating humidity: 5 to 95% Non-Condensing Product Includes: • Dish Reflector • Antenna Feed • Rear Housing • Dish Bracket • Pole Clamp • U Bolt • Flange Nuts (M8, Qty. 2) • PoE Adapter (24V, 0.5A) • Power Cord • Quick Start Guide
    Datasheet and Quick Start Guide PBE-5AC-620 Powerbeam Datasheet Learn More »
  7.  
    Ubiquiti airMAX PowerBeam Gen2 5GHz 25dBi 802.11ac Bridge Kit INTL - Bridge Connection

    Ubiquiti airMAX PowerBeam Gen2 5GHz 25dBi 802.11ac Bridge Kit INTL

    $218.50

    This product is for export only.
    * Some frequencies may require activation; visit: here

    This kit has everything you need to create a perfect Ubiquiti airMAX PtP link except for the Cat-5 cable!
    The Ubiquiti Networks airMAX PowerBeam Gen 2 is an ideal product for CPE deployments requiring maximum performance. Utilizing InnerFeed technology to integrate the radio into the feedhorn of the antenna, there is now need for extra cables, improving performance thanks to no cable loss. It requires no tools for assembly, requiring only a single wrench for pole-mounting.

    Product Specifications

    • Dimensions: 420 x 420 x 230mm (16.54 x 16.54 x 9.06")
    • Weight: 2.22kg (4.89lbs)
    • Power Supply: 24V, 0.5A Gigabit PoE Adapter (included)
    • Max. Power Consumption: 8.5W
    • Power Method: Passive PoE (Pairs 4,5+;7,8 Return)
    • Supported Voltage Range: 20 to 26VDC
    • Gain: 25dBi
    • Networking Interface: (1) 10/100/1000 Ethernet Port
    • Processor Specs: MIPS 74Kc
    • Memory: 64MB
    • LEDs: Power, Ethernet, (4) Signal Strength
    • Channel Sizes:
        PtP Mode: 10/20/30/40/50/60/80MHz
        PtMP Mode: 10/20/30/40MHz
    • Enclosure Characteristics:
        Antenna Feed: Outdoor UV Stabilized Plastic
        Dish Reflector: Powder-Coated SPCC
    • Mounting: Pole-Mounting Kit (included)
    • Wind Loading: 380N @ 200km/h (85.4lbf @ 125mph)
    • Wind Survivability: 200km/h (125mph)
    • ESD/EMP Protection: Air: ±24kV / Contact: ±24kV
    • Operating Temperature: -40 to 70°C (-40 to 158°F)
    • Operating Humidity: 5 to 95% non-condensing
    • RoHS Compliance: Yes
    • Salt Fog Test: IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
    • Vibration Test: IEC 68-2-6
    • Temperature Shock Test: IEC 68-2-14
    • UV Test: IEC 68-2-5 at 40°C (104°F), Equivalent: ETS 300 019-1-4
    • Wind-Driven Rain Test: ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
    • Certifications: CE, FCC, IC
    • Operating Frequency:
        2412 - 2472MHz
        USA U-NII-1: 5150 - 5250MHz
        USA U-NII-2A: 5250 - 5350MHz
        USA U-NII-2C: 5470 - 5725MHz
        USA U-NII-3: 5725 - 5850MHz

    This complete kit includes:

    • (2) PBE-5AC-Gen2
    • (2) Dish Reflector
    • (2) Antenna Feed
    • (2) Rear Housing
    • (2) Adjustment Bracket
    • (2) Mounting Bracket
    • (8) Hex Bolts with Washers
    • (2) Pole Clamp
    • (4) Long Carriage Bolts
    • (4) Flange Nuts
    • (2) Gigabit PoE (24V, 0.5A) with Mounting Bracket
    • (2) Power Cord
    • (2) Quick Start Guide

    Product Documentation

    PBE-5AC-Gen2 US Datasheet
    PBE-5AC-Gen2 US Quick Start Guide Learn More »
  8.  
     
    Ubiquiti airMAX PowerBeam Gen2 5GHz 25dBi 802.11ac Bridge Kit - Bridge Connection

    Ubiquiti airMAX PowerBeam Gen2 5GHz 25dBi 802.11ac Bridge Kit US

    $220.00

    This product is a US version, intended for use in the US and Canada. This US version contains the following frequencies 5150-5250 MHz*, 5250-5350 MHz*, 5470-5725 MHz*, 5725-5850 MHz. If you are an international customer, seeking the International version, please contact us at sales@balticnetworks.com or call our Sales Line 1-800-929-3610. Si usted está buscando productos Ubiquiti version international de exportación contáctenos a sales@balticnetworks.com o llámanos a 1-800-929-3610
    This kit has everything you need to create a perfect 802.11ac Ubiquiti airMAX PtP link except for the Cat-5 cable with the PBE-5AC-Gen2 US!
    The Ubiquiti Networks airMAX PowerBeam Gen 2 is an ideal product for CPE deployments requiring maximum performance. Utilizing InnerFeed technology to integrate the radio into the feedhorn of the antenna, there is now need for extra cables, improving performance thanks to no cable loss. It requires no tools for assembly, requiring only a single wrench for pole-mounting.

    Product Specifications

    • Dimensions: 420 x 420 x 230mm (16.54 x 16.54 x 9.06")
    • Weight: 2.22kg (4.89lbs)
    • Power Supply: 24V, 0.5A Gigabit PoE Adapter (included)
    • Max. Power Consumption: 8.5W
    • Power Method: Passive PoE (Pairs 4,5+;7,8 Return)
    • Supported Voltage Range: 20 to 26VDC
    • Gain: 25dBi
    • Networking Interface: (1) 10/100/1000 Ethernet Port
    • Processor Specs: MIPS 74Kc
    • Memory: 64MB
    • LEDs: Power, Ethernet, (4) Signal Strength
    • Channel Sizes:
        PtP Mode: 10/20/30/40/50/60/80MHz
        PtMP Mode: 10/20/30/40MHz
    • Enclosure Characteristics:
        Antenna Feed: Outdoor UV Stabilized Plastic
        Dish Reflector: Powder-Coated SPCC
    • Mounting: Pole-Mounting Kit (included)
    • Wind Loading: 380N @ 200km/h (85.4lbf @ 125mph)
    • Wind Survivability: 200km/h (125mph)
    • ESD/EMP Protection: Air: ±24kV / Contact: ±24kV
    • Operating Temperature: -40 to 70°C (-40 to 158°F)
    • Operating Humidity: 5 to 95% non-condensing
    • RoHS Compliance: Yes
    • Salt Fog Test: IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
    • Vibration Test: IEC 68-2-6
    • Temperature Shock Test: IEC 68-2-14
    • UV Test: IEC 68-2-5 at 40°C (104°F), Equivalent: ETS 300 019-1-4
    • Wind-Driven Rain Test: ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
    • Certifications: CE, FCC, IC
    • Operating Frequency:
        2412 - 2472MHz
        USA U-NII-1: 5150 - 5250MHz
        USA U-NII-2A: 5250 - 5350MHz
        USA U-NII-2C: 5470 - 5725MHz
        USA U-NII-3: 5725 - 5850MHz

    This complete kit includes:

    &bull: (2) PBE-5AC-Gen2 US
    • (2) Dish Reflector
    • (2) Antenna Feed
    • (2) Rear Housing
    • (2) Adjustment Bracket
    • (2) Mounting Bracket
    • (8) Hex Bolts with Washers
    • (2) Pole Clamp
    • (4) Long Carriage Bolts
    • (4) Flange Nuts
    • (2) Gigabit PoE (24V, 0.5A) with Mounting Bracket
    • (2) Power Cord
    • (2) Quick Start Guide

    Product Documentation

    PBE-5AC-Gen2 US Datasheet
    PBE-5AC-Gen2 US Quick Start Guide Learn More »
  9.  
    PBE-2AC-400 US 2-Pack Ubiquiti airMAX PowerBeam 2.4GHz 802.11ac High Gain dish CPE 400mm US 2-Pack

    Ubiquiti airMAX PowerBeam 2.4GHz 802.11ac High Gain dish CPE 400mm US 2-Pack

    $226.00

    This product is a US version, intended for use in the US and Canada. This US version contains the following frequencies 2412-2462MHz or 5725-5850MHz. If you are an international customer, seeking the International version, please contact us at sales@balticnetworks.com or call our Sales Line 1-800-929-3610. Si usted está buscando productos Ubiquiti version international de exportación contáctenos a sales@balticnetworks.com o llámanos a 1-800-929-3610 Ubiquiti PowerBeam 2AC blocks or spatially filters out noise so noise immunity is improved. The PowerBeam is equipped with a long range Point-to-Point link mode. This PowerBeam airMAX ac products support up to 330+ Mbps real TCP/IP throughput - more than double the throughput of standard airMAX products. Product Specifications: • Frequency: 2412-2462MHz • Management Radio: U-NII-3: 5725-5850MHz • Dimensions: 420 x 420 x 289mm (16.54 x 16.54 x 11.38") • Weight (mount included): 1.795 kg (4.809 lb) • Gain: 18 dBi • Networking Interface: (1) 10/100/1000 Ethernet Port • Enclosure: Outdoor UV Stabilized Plastic • Max. Power Consumption: 7.5W • Power Supply: 24V, 0.5A Gigabit PoE Adapter (Included) • Power Method: Passive PoE (Pairs 4,5+;7,8 Return) • Processor Specs: MIPS 74Kc • Memory: 64MB • LEDs: Power, Ethernet, (4) Signal Strength • Channel Sizes: nbsp;nbsp;nbsp: PtP Mode 10/20/40MHz - Antenna Feed (Outdoor UV stabilized Plastic enclosure characteristic) nbsp;nbsp;nbsp: PtMP Mode 10/20/40MHz Dish Reflector - (Powder-Coated SPCC enclosure characteristic) • ESD/EMP Protection: Air: +/- 24 kV, Contact: +/-24kV • RoHS Compliance: Yes • Salt Fod Test: IEC 68-2-11 (ATSM B 117), Equivalent: MIL-STD-810 G Method 509.5 • Supported Voltage Range: 22 to 26VDC • Wind Survivability: 200 km/h (125 mph) • Wind Loading: 342.5 N @ 200 km/h (77 lbf @125 mph) • Mounting: Pole Mounting Kit Included • Operating Temperature: -40 to 70 C (-40 to 158 F) • Operating Humidity: 5 to 95% Noncondensing • Temperature Shock Test: IEC 68-2-14 • Vibration Test: IEC 68-2-6 • UV Test IEC 68-2-5 at 40degC (104degF), Equivalent: ETS 300 019-1-4 • Wind-Driven Rain Test: ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 • Certifications: CE, FCC, IC Product Includes: 2 x Dish Reflector 2 x PBE-2AC-400 Antenna Feed 2 x Rear Housing 2 x Dish Bracket 2 x Pole Clamp 2 x U-Bolt 4 x Flange Nuts (m8, Qty. 2) 2 x Gigabit PoE (24V, 0.5A) with mounting Bracket 2 x Power Cord 2 x Quick Start Guide
    Product Documentation
    PowerBeam-2AC-400 Data Sheet PowerBeam 2AC 400 Quick Start Guide Learn More »
  10.  
    UBNT-LR5ACPTP Ubiquiti 5GHz PtP Long-Range Link Starter Kit

    Ubiquiti 5GHz PtP Long-Range Link Starter Kit INTL

    $296.00

    The International version operating frequency is 5150-5875Mhz. The US and Canada version with an operating frequency of 5725-5850Mhz is also available. This product is for export only. Customers in the US and Canada are advised to use part number: UBNT-LR5ACPTP-US/CA. This kit has everything you need to create a perfect PtP long-range link except for the Cat-5 cable!
    Ubiquiti UBNT-LR5ACPTP is a long range starter kit consisting of two PBE-5AC-500 bridge devices. Operating on 5GHz, each device has a 27dBi gain and 500mm dish. Using airMAX 802.11ac technology, this kit supports up to 450+ Mbps throughput in a small form factor. It launches with PtP functionality, however client mode feature can be added with a firmware upgrade from Ubiquiti. The radio includes a protective radome cover to shield it from the environmental elements. Product Features: • Processor: Atheros MIPS 74Kc, 720MHz • Memory: 128MB DDR2, 8 MB flash • Networking interface: (1) 10/100/1000 Ethernet port • Channel size: 10/20/30/40/50/60/80MHz (PtP) / 10/20/30/40MHz (PtMP) • Protocol: 802.11AC • Polarization: Dual linear • Gain: 27dBi • ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV • Operating Temperature -40 to 70° C (-40 to 158° F) • Operating Humidity 5 to 95% Non-Condensing • Power Supply 24V, 0.5A Gigabit PoE • Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return) • Max. Power Consumption 8.5W • Gain 27 dBi Product Includes: • (2) Dish reflector (500mm) • (2) Radome • (2) Antenna feed • (2) Rear housing • (2) Dish bracket • (2) Pole clamp • (2) U-Bolt • (4) Flange nuts • (2) Gigabit PoE Adapter (24V, 0.5A) • (2) Power Cord • (2) Quick Start Guide Datasheet and Quick Start Guide PBE-5AC-500 Datasheet PBE-5AC-500 Quick Start Guide Learn More »

Items 1 to 10 of 21 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction

Back to top