(888) 929-3610
Affordable Wireless Solutions

Battery Chargers

Battery Chargers

Tycon Power Battery Chargers can be used with their solar power products, or directly with GEL/AGM sealed batteries. This category includes the TP-BC line, which are used for switching from AC power to battery power seamlessly, and the TP-SC line, which are for solar battery charging control.

Items 1 to 10 of 18 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. Tycon Solar PWM Battery Charging Controller, Auto Voltage, 12/24V out, 20A

    Tycon Solar PWM Battery Charging Controller Auto Voltage 12/24V out 20A

    $37.95

    Tycon Solar controllers are 3 stage PWM type battery charging controllers controlled by an industrial CPU. The controllers are autoranging to accommodate 12V and 24V battery voltage systems. They have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge. The built-in overdischarge protection and low self consumption ensures the battery is not overdischarged, which greatly increases the life of the batteries. They have three multifunction LED indicators to give a quick visual status of the load status, if battery is charging or fully charged, as well as any fault condition. There is a convenient On/Off button to disconnect load power. Connections are via 6 screw terminals for wire size up to 10AWG. The controllers are internally fused with a standard replaceable fuse. There are four screw holes(4mm) for mounting. Features • 3 stage PWM with automatic overdischarge protection for extended battery life • Low self consumption • Autoranging 12V or 24V Applications • Remote Power Systems • Solar power Applications • Rated Voltage: 12/24 (Auto Detect) • Rated Current (Solar and Load): 20A • Absorption Voltage: 14.4 / 28.8 +/-0.2V • Float Voltage: 13.8 / 27.6 +/-0.2V • Overvoltage Protection: 15.5 / 31V • Over Discharge Voltage: OFF: 10.7 / 21.4 +/- 0.2V ON: 12.6 / 25.2 +/-0.2V: • Self Consumption: < 15mA • Voltage Drop (Battery to Load): < 0.3V • Max Wire Size: 10 AWG • Operating Temp: -30°C to 60°C (-22°F to 140°F) • Dimensions: 168 x 88 x 34mm(6.6 x 3.5 x 1.25”) • Weight: 283 g (10 oz ) Product Data Sheet Tycon Systems Learning Center Presentation Learn More »
  2. TP-BC12-120 Tycon Solar 12VDC 8.3A 120W Battery Charger 120-240VAC in 2 Wire Output

    Tycon Solar 12VDC 8.3A 120W Battery Charger 120-240VAC in 2 Wire Output

    $37.95

    The TP-BCxx-120 battery chargers provide up to 120W of total charging power. The battery charger is compatible with GEL/AGM type sealed lead acid batteries. The charger has various protections for short-circuit, over-load, over-voltage, over-current and over-temp. It operates over a wide temperature range. . The unit comes with a removeable AC cord with a North American Plug. The units are auto-ranging so they can work from 100VAC to 240VAC.
    Product Features
    • 120W Total Power. 12V, 24V and 48V models. • Small Form Factor, Low Cost • Over-Voltage, Over-Current, Over-Temp, OverLoad, Short-Circuit Protections • Led indicator: Red=Charging, Green=Battery Full • Wide temperature operation • CE, UL and FCC Certifications
    Applications
    • Wireless Base Stations, Cellular Base Stations • Surveillance Systems • Battery Backup Systems
    Product Features
    • Total Power Available (for • Load and Battery charging) 120W • Nominal Battery Voltage 12VDC • Battery Charge Max Current 8.3A • Battery Charger Voltage 14.4V • Load Regulation 5% • Line Regulation 3% • Efficiency 85% Minimum • Output Connector 2 Wire ; 914mm (36”) long cable • EMC Standards FCC Class B , NE55022 Class B • Safety Standards UL60950-1, CSA 22.2, TUV EN60950 • AC Power Input (+-10%) 120VAC / 240VAC , 50/60Hz • AC Input Current 2.5A Max • HiPot Test 3000VAC • Insulation Resistance 50 MOhm, 500VDC • Operating Temperature -30 to +55C (22 to +131°F) • Operating Humidity (RH) Up to 90% (non condensing) • Storage Temperature -40 to +85°C (-40 to +185°F) • Storage Humidity Up to 90% (non-condensing) • MTBF (Mean Time Between Failure) >50,000 hrs • Dimensions (LxWxH) 172 x 72.5 x 34.5mm ( 6.8 x 2.9 x 1.4”) • Weight 439g (15.5oz) • Warranty 3 Years
    Product Documentation
    TP-BC12-120 Data Sheet TP-BC12-120 User Guide Learn More »
  3. TP-BC24-120 Tycon Solar 24VDC 4.35A 120W Battery Charger 120-240VAC in 2 Wire Output

    Tycon Solar 24VDC 4.35A 120W Battery Charger 120-240VAC in 2 Wire Output

    $37.95

    The TP-BCxx-120 battery chargers provide up to 120W of total charging power. The battery charger is compatible with GEL/AGM type sealed lead acid batteries. The charger has various protections for short-circuit, over-load, over-voltage, over-current and over-temp. It operates over a wide temperature range. . The unit comes with a removeable AC cord with a North American Plug. The units are auto-ranging so they can work from 100VAC to 240VAC.
    Product Features
    • 120W Total Power. 12V, 24V and 48V models. • Small Form Factor, Low Cost • Over-Voltage, Over-Current, Over-Temp, OverLoad, Short-Circuit Protections • Led indicator: Red=Charging, Green=Battery Full • Wide temperature operation • CE, UL and FCC Certifications
    Applications
    • Wireless Base Stations, Cellular Base Stations • Surveillance Systems • Battery Backup Systems
    Product Features
    • Total Power Available (for Load and Battery charging) 120W • Nominal Battery Voltage 24VDC • Battery Charge Max Current 4.35A • Battery Charger Voltage 28.8V • Load Regulation 5% • Line Regulation 3% • Efficiency 85% Minimum • Output Connector 2 Wire ; 914mm (36”) long cable • EMC Standards FCC Class B , NE55022 Class B • Safety Standards UL60950-1, CSA 22.2, TUV EN60950 • AC Power Input (+-10%) 120VAC / 240VAC , 50/60Hz • AC Input Current 2.5A Max • HiPot Test 3000VAC • Insulation Resistance 50 MOhm, 500VDC • Operating Temperature -30 to +55C (22 to +131°F) • Operating Humidity (RH) Up to 90% (non condensing) • Storage Temperature -40 to +85°C (-40 to +185°F) • Storage Humidity Up to 90% (non-condensing) • MTBF (Mean Time Between Failure) >50,000 hrs • Dimensions (LxWxH) 172 x 72.5 x 34.5mm ( 6.8 x 2.9 x 1.4”) • Weight 439g (15.5oz) • Warranty 3 Years
    Product Documentation
    TP-BC24-120 Data Sheet TP-BC24-120 User Guide Learn More »
  4. TP-BC48-120 Tycon Solar 48VDC 2.15A 120W Battery Charger 120-240VAC in 2 Wire Output

    Tycon Solar 48VDC 2.15A 120W Battery Charger 120-240VAC in 2 Wire Output

    $37.95

    The TP-BCxx-120 battery chargers provide up to 120W of total charging power. The battery charger is compatible with GEL/AGM type sealed lead acid batteries. The charger has various protections for short-circuit, over-load, over-voltage, over-current and over-temp. It operates over a wide temperature range. . The unit comes with a removeable AC cord with a North American Plug. The units are auto-ranging so they can work from 100VAC to 240VAC.
    Product Features
    • 120W Total Power. 12V, 24V and 48V models. • Small Form Factor, Low Cost • Over-Voltage, Over-Current, Over-Temp, OverLoad, Short-Circuit Protections • Led indicator: Red=Charging, Green=Battery Full • Wide temperature operation • CE, UL and FCC Certifications
    Applications
    • Wireless Base Stations, Cellular Base Stations • Surveillance Systems • Battery Backup Systems
    Product Features
    • Total Power Available (for Load and Battery charging) 120W • Nominal Battery Voltage 48VDC • Battery Charge Max Current 2.15A • Battery Charger Voltage 57.6V • Load Regulation 5% • Line Regulation 3% • Efficiency 85% Minimum • Output Connector 2 Wire ; 914mm (36”) long cable • EMC Standards FCC Class B , NE55022 Class B • Safety Standards UL60950-1, CSA 22.2, TUV EN60950 • AC Power Input (+-10%) 120VAC / 240VAC , 50/60Hz • AC Input Current 2.5A Max • HiPot Test 3000VAC • Insulation Resistance 50 MOhm, 500VDC • Operating Temperature -30 to +55C (22 to +131°F) • Operating Humidity (RH) Up to 90% (non condensing) • Storage Temperature -40 to +85°C (-40 to +185°F) • Storage Humidity Up to 90% (non-condensing) • MTBF (Mean Time Between Failure) >50,000 hrs • Dimensions (LxWxH) 172 x 72.5 x 34.5mm ( 6.8 x 2.9 x 1.4”) • Weight 439g (15.5oz) • Warranty 3 Years
    Product Documentation
    TP-B148-120 Data Sheet TP-BC48-120 User Guide Learn More »
  5. Tycon Solar POE/Solar Dual Input 12V Battery Charge Control Angled

    Tycon Solar POE/Solar Dual Input 12V Battery Charge Control

    $71.20

    Tycon Solar TP-SCPOE-1212 POE/Solar charge controllers have dual inputs to charge batteries from a POE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications. The solar input can handle up to 8A. The POE input up to 2.5A. They have a built in POE inserter that delivers 12V 1A at the POE out port. They also have a secondary wire terminal 12V 1.5A output. They have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge. Product Features • Dual input: Charges 12V batteries from solar panel and/or passive PoE • Built in DC to DC converter • Compact and high temperature operation • Low self consumption: < 0.5W Product Applications • Remote power systems; surveillance, sensors • Wireless stations; AP / client / repeaters • UPS systems; lighting, fences, gates Product Specifications • Solar input voltage: 15V - 36V @ 8A max • PoE input voltage: 18V - 57V @ 2.6A • Battery voltage: 12V • PoE output: 11-15V @ 1A • Secondary output: 11V to 15V @ 1.5A max • Charge voltage: 14.6 ±0.3V • Maintenance voltage: 13.5 ±0.3V • Over discharge voltage: 11.0 ±0.3V ; 12.0 ±0.3V • Load-on consumption: <0.5W • Load-off consumption: 1.7mA Typ 0.02W • Max wire size: 12 AWG • Operating temperature: -30°C to 60°C (-22°F to 140°F) • Dimensions: 159 x 118 x 40mm (6.3 x 4.6 x 1.6") • Weight: 312 g (11 oz) TP-SCPOE-1212 Datasheet Tycon Systems Learning Center Presentation Learn More »
  6. Tycon Solar POE/Solar Dual Input 12V Battery Charge Control Angled

    Tycon Solar POE/Solar Dual Input 12V Battery Charge Control

    $75.95

    Tycon Solar TP-SCPOE-1224 has dual inputs to charge batteries from a POE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications. The solar input can handle up to 8A. The POE input up to 2.5A. They have a built in POE inserter that delivers 24V 1.25A at the POE out port. They also have a secondary wire terminal 12V 1.5A output. They have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge. The built-in overdischarge protection and low self consumption ensures the battery is not overdischarged, which greatly increases the life of the batteries. They have five LED indicators to give a quick visual status if current is being supplied by a POE source or solar panel, if battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity. Solar and Battery Connections are via 4 wire terminals for wire size up to 10AWG. POE Input and Output is via 2 RJ45 shielded connectors. The controllers are externally fused with a standard replaceable fuse. Size: 159 x 118 x 40mm (6.3 x 4.6 x 1.6”) Weight: 312 g (11 oz ) Product Features • Dual input: Charges 24V batteries from solar panel and/or passive PoE • Built in DC to DC converter • Compact and high temperature operation • Low self consumption: < 0.5W Product Applications • Remote power systems; surveillance, sensors • Wireless stations; AP / client / repeaters • UPS systems; lighting, fences, gates Product Specifications • Solar input voltage: 15V - 36V @ 8A max • PoE input voltage: 18V - 57V @ 2.6A • Battery voltage: 12V • PoE output: 24V @ 1.25A • Secondary output: 11V to 15V @ 1.5A max • Charge voltage: 14.6 ±0.3V • Maintenance voltage: 13.5 ±0.3V • Over discharge voltage: 11.0 ±0.3V ; 12.0 ±0.3V • Load-on consumption: <0.5W • Load-off consumption: 1.7mA Typ 0.02W • Max wire size: 12 AWG • Operating temperature: -30°C to 60°C (-22°F to 140°F) • Dimensions: 159 x 118 x 40mm (6.3 x 4.6 x 1.6") • Weight: 312 g (11 oz) TP-SCPOE-1224 Datasheet Tycon Systems Learning Center Presentation Learn More »
  7. Tycon Solar POE/Solar Dual Input 12V Battery Charge Control

    Tycon Solar POE/Solar Dual Input 12V Battery Charge Control

    $75.95

    Tycon Solar TP-SCPOE-1248 controllers have dual inputs to charge batteries from a POE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications. The solar input can handle up to 8A. The POE input up to 2.5A. They have a built in POE inserter that delivers 48V 0.375A at the POE out port. They also have a secondary wire terminal 12V 1.5A output. They have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge. The built-in overdischarge protection and low self consumption ensures the battery is not overdischarged, which greatly increases the life of the batteries. They have five LED indicators to give a quick visual status if current is being supplied by a POE source or solar panel, if battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity. Solar and Battery Connections are via 4 wire terminals for wire size up to 10AWG. POE Input and Output is via 2 RJ45 shielded connectors. The controllers are externally fused with a standard replaceable fuse. Product Features • Dual input: Charges 24V batteries from solar panel and/or passive PoE • Built in DC to DC converter • Compact and high temperature operation • Low self consumption: < 0.5W Product Applications • Remote power systems; surveillance, sensors • Wireless stations; AP / client / repeaters • UPS systems; lighting, fences, gates Product Specifications • Solar input voltage: 15V - 36V @ 8A max • PoE input voltage: 18V - 57V @ 2.6A • Battery voltage: 12V • PoE output: 48V @ .625A • Secondary output: 11V to 15V @ 1.5A max • Charge voltage: 14.6 ±0.3V • Maintenance voltage: 13.5 ±0.3V • Over discharge voltage: 11.0 ±0.3V ; 12.0 ±0.3V • Load-on consumption: <0.5W • Load-off consumption: 1.7mA Typ 0.02W • Max wire size: 12 AWG • Operating temperature: -30°C to 60°C (-22°F to 140°F) • Dimensions: 159 x 118 x 40mm (6.3 x 4.6 x 1.6") • Weight: 312 g (11 oz) TP-SCPOE-2424 Datasheet Tycon Power Learning Center Presentation Learn More »
  8. Tycon Solar POE/Solar Dual Input 24V 60W Battery Charge Control Angled

    Tycon Solar POE/Solar Dual Input 24V 60W Battery Charge Control

    $85.45

    Tycon Solar POE/Solar charge controllers have dual inputs to charge batteries from a POE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications. The solar input can handle up to 8A. The POE input up to 2.6A. They have a built in POE inserter that delivers 24V 1A at the POE out port. They also have a secondary wire terminal 24V 1.5A output. They have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge. They have five LED indicators to give a quick visual status if current is being supplied by a POE source or solar panel, if battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity. Solar and Battery Connections are via 4 wire terminals for wire size up to 10AWG. POE Input and Output is via 2 RJ45 shielded connectors. The controllers are externally fused with a standard replaceable fuse. Size: 159 x 118 x 40mm (6.3 x 4.6 x 1.6”) Weight: 312 g (11 oz ) TP-SCPOE-2424 Datasheet Tycon Systems Learning Center Presentation Learn More »
  9. Tycon Solar POE/Solar Dual Input 24V /48V POE 60W Battery Charge Control Angled

    Tycon Solar POE/Solar Dual Input 24V /48V POE 60W Battery Charge Control

    $85.45

    The solar input can handle up to 8A. The POE input up to 2.6A. They have a built in POE inserter that delivers 48V 0.625A at the POE out port. They also have a secondary wire terminal 24V 1.5A output. They have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge. The built-in overdischarge protection and low self consumption ensures the battery is not overdischarged, which greatly increases the life of the batteries. They have five LED indicators to give a quick visual status if current is being supplied by a POE source or solar panel, if battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity. Solar and Battery Connections are via 4 wire terminals for wire size up to 10AWG. POE Input and Output is via 2 RJ45 shielded connectors. The controllers are externally fused with a standard replaceable fuse. Size: 159 x 118 x 40mm (6.3 x 4.6 x 1.6”) Weight: 312 g (11 oz ) Tycon Power Systems POE/Solar charge controllers have dual inputs to charge batteries from a POE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications. TP-SCPOE-2448-HP Data Sheet Tycon Systems Learning Center Presentation Learn More »
  10. TP-BC48-600 Tycon Solar 600W Battery Charger 58.8V 10A w/US Power Cord Fan View

    Tycon Solar 600W Battery Charger 58.8V 10A w/US Power Cord

    Regular Price: $189.95

    Special Price: $180.45

    Tycon Solar TP-BC48-600 battery chargers provide up to 600W of total charging power. The battery charger is compatible with GEL/AGM type sealed lead acid batteries. The charger has various protections for reverse current, short-circuit, over-load, over-voltage, and over-current. There is an LED which indicates charging (Red) or battery full (Green). The unit comes with a removeable AC cord with a North American Plug. The units are can work from 90VAC to 240VAC (selectable via switch).
    Features
    • Total Power Available (for Load and Battery charging): 600W • Nominal Battery Voltage: 48VDC • Battery Charge Max Current: 10A • Battery Charger Voltag:e 58.8V • Battery Float Voltage: 55.2V • Efficiency: >88% • DC Output Cable: 2 Wire 14AWG ; 1.2m (48”) long cable Brown = V+, Blue = VAC • Input Connector IEC C14 • AC Power Cord: IEC C13 to Nema 5-15P, 1.2m (48") • AC Power Input: 120VAC / 240VAC , 50/60Hz • Hi-Pot Test: 1500VAC / 10mA / 1min • Insulation Resistance: >10MOhm, 500VDC • Operating Temperature: -10 to +40C (14 to +104°F) • Operating Humidity (RH): 5% to 90% (non condensing) • Storage Temperature: -40 to +70°C (-40 to +158°F) • Storage Humidity: 5% to 95% (non-condensing) • Standards Compliance: CE, EN60335-1:2002 and EN60335-2-29:2002 • MTBF (Mean Time Between Failure): >50,000 hrs • Dimensions: (LxWxH) 216 x 120 x 76mm (8.5 x 4.75 x 3”) • Weight: 1.95kg (4.3lb) • Warranty: 2 Years
    Datasheet
    TP-BC48-600 Learn More »

Items 1 to 10 of 18 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction

Back to top