(888) 929-3610
Affordable Wireless Solutions

New MikroTik Products

New MikroTik Products

MikroTiks New Products are the latest and greatest WISP technology on the market. They offer the complete solution for your wireless connectivity needs. Beginning with your home network and reaching up to the ISP center of operations.

10 Item(s)

per page

Grid  List 

Set Descending Direction
  1. GPEN11 MikroTik GPEN11 GPEN Passive POE Injector

    MikroTik GPEN Passive POE Injector

    Regular Price: $11.00

    Special Price: $9.50

    The MikroTik GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy ethernet alternative. It also has a designated space for an ISP sticker on the front. Sticker size: 6,6 x 2,54 cm. GPEN11 can be mounted inside customer premises, next to the WiFi router which provides the connectivity to the users. The GPEN11 itself will then power the ISP router, whether a outdoor wireless unit mounted on a roof, or the network switch. The GPEN unit can be securely attached to a wall, or communications cabinet. The ethernet cable can be routed either directly through it’s bottom cable opening, or into the wall, as preferred.
    Product Specifications
    • 10/100/1000 Ethernet ports: 2 • Number of DC inputs: 1 • PoE out: Yes, Passive PoE • Supported input voltage: 12 - 57 V • Dimensions: 92 x 104 x 24 mm • Operating temperature: -40 to 70°C
    Product Includes
    • GPEN11 • K-62 screw pack
    Product Documentation
    MikroTik GPEN11 Datasheet Learn More »
  2. MikroTik Gigabit Passive Ethernet Repeater (GPeR) 802.3af/at 24 - 57V

    MikroTik Gigabit Passive Ethernet Repeater (GPeR) 802.3af/at 24 - 57V

    Regular Price: $16.00

    Special Price: $14.25

    MikroTik Gigabit Passive Ethernet Repeater (GPeR) is part of our new GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy Ethernet alternative. The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m. Handy for high rise buildings, multi-apartment buildings, with many floors and sections, where very long ethernet cables might be a problem. Maximum allowed length of CAT6 Ethernet cable between GPeR and power source/router is up to 100 m (depending on cable quality, high quality - up to 150 m). Maximum allowed distance of CAT6 Ethernet cable between two GPeR devices is up to 210 m (depending on cable quality).
    Specifications
    • Product code GPeR • Gigabit Ethernet ports 2 • PoE in 802.3af/at, 24 - 57 V • PoE out Jumper selectable passive PoE Passthrough • Max power consumption 2 W • Operating temperature -40 to 70°C
    Use Case
    • Use case 1: Extension of Ethernet link to up to 1,5 km if one side have PoE source (up to 3 km   both sides of the link have PoE sources). • Use case 2: Home user connects his WiFi AP to GPEN11, which then outputs PoE (Power over   Ethernet), Ethernet is extended with GPeR units then on the roof you have a netPower series switch (coming later this year), which takes power from all the apartments (from GPEN11), after that   the switch is connected to the uplink connection, for example with our 60 GHz series of device.
    Product Documentation
    GPeR Data Sheet Learn More »
  3. solidMOUNT MikroTik LHG Series solidMount Pole Mount Adapter

    MikroTik LHG Series solidMount Pole Mount Adapter

    Regular Price: $29.00

    Special Price: $24.00

    MikroTik solidMOUNT is an advanced pole mount adapter for LHG series products.
    Features
    • Allows adjustment both vertically and horizontally • Supports all LHG series, products, including LHG XL. • Made from metal. • Package also includes a U-bolt and a mounting kit.
    Specifications
    • Product Code: solidMOUNT • Dimensions: 95 x 88 x 108mm • Compatible Devices: LHG series devices
    Datasheet
    solidMOUNT Learn More »
  4. S+AO0005 MikroTik 5m SFP+ 10Gbps Active Optics Direct Attach Cable

    MikroTik 5m SFP+ 10Gbps Active Optics Direct Attach Cable

    $49.00

    MikroTik 5m SFP+ 10Gbps Active Optics Direct Attach Cable is a highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all of MikroTiks products with SFP/SFP+ Ports, including new RB4011 series. (RB4011 series are not compatible with MikroTiks passive direct attach cables S+DA0001 and S+DA0003) Learn More »
  5. RBSXTR MikroTik SXT R (Antenna Only, Does Not Include LTE modem)

    MikroTik SXT LTE R (Antenna Only, Does Not Include LTE modem)

    Regular Price: $79.00

    Special Price: $65.75

    MikroTik SXT LTE kit is a device for remote locations that are within cellular network coverage. However, due to its professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t. This product is only an antenna and does not include LTE modem SXT R (RBSXTR) doesn't include any LTE modem (free miniPCI-e slot) - Antenna only version, to be used with custom LTE modem.
    Specifications
    • Product Code: RBSXTR • CPU: QCA9531 650 MHz • Size of RAM 64 MB • Storage 16 MB Flash • 10/100 Ethernet ports 2 • LTE antenna gain 10.5 dBi • Antenna beam width 60° • LTE category 4 (150Mbps Downlink, 50Mbps Uplink) • SIM slot 2 (Micro SIM) • PoE in Yes, on Ether1 • PoE out Yes, on Ether2, max out per port output (input < 30 V): 600 mA, max out per port output (input > 30 V): 400 mA max total out (A): 600 mA • Supported input voltage 18 - 57 V (Passive PoE, 802.3af/at on Ether2) • Dimensions 140 x 140 x 103 mm • Operating temperature -40°C .. +60°C tested • License level 3 • Operating System RouterOS • Max Power consumption 6 W
    Product Includes
    (1) RBSXT R (1) Power Adapter (24 V 0.38A) (1) PoE Injector (1) Metal Ring (1) Pole Mounting Bracket
    Product Documentation
    RBSXTR Data Sheet Learn More »
  6. RBLHGR MikroTik LHG LTE 4G (Antenna Only, Doesn't Include Any LTE Modem)

    MikroTik LHGR LTE 4G (Antenna Only, Doesn't Include Any LTE Modem)

    Regular Price: $109.00

    Special Price: $90.75

    MikroTik LHGR LTE 4G is a device for remote locations that are within cellular network coverage. Mount it outdoors, on a pole, mast or any high enough structure, and connect even where cell phones can’t. This unit is equipped with one Ethernet port. This is an antenna only and does not include any LTE modems
    Specifications
    • Product Code: RBLHGR • CPU: QCA9531 650 MHz • Size of RAM: 64 MB • Storage: 16 MB Flash • 10/100 Ethernet ports: 1 • Antenna Gain: 21dBi • Antenna Beam Width: 25 degrees • LTE Category: - • 3G Category: - • 2G Category: - • SIM Slot: 1 (Mini SIM) • PoE In: Yes • Supported Input Voltage: 12 - 57V (Passive PoE, 802.3af/at) • Dimensions: 391 x 391 x 227 mm • Operating Temperature: -40°C .. +60°C tested • License Level: 3 • Operating System: RouterOS • Max. Power Consumption: 6W
    Product Includes
    (1) LHGR LTE 4G (w/o modem) (1) Power Adapter (24V 0.38A) (1) PoE Injector (2 Metal Rings (1) K-LHG screws
    Product Documentation
    RBLHGR Data Sheet Learn More »
  7. RBwAPGR-5HacD2HnD MikroTik wAP R ac 2.4-5GHz Dual-Band Wireless AP (without LTE Card)

    MikroTik wAP R ac 2.4-5GHz Dual-Band Wireless AP (without LTE Card)

    Regular Price: $129.00

    Special Price: $107.50

    MikroTik wAP R ac LTE is a powerful dual-band wireless AP with LTE backup and two Gigabit Ethernet ports. Based on the popular wAP form factor, the device is weatherproof and ready for outdoor and indoor installations. The device is powered by a four core 716MHz CPU and 128 MB RAM, capable of handling heavy loads. It’s equipped with two Gigabit Ethernet ports, dual-chain 2.4GHz and dual-chain 5GHz wireless for dual concurrent AP coverage. It has a DC power jack, and supports 10-57V power input by Passive POE or 802.3af/at. Does Not Include LTE Card
    Specifications
    • CPU: Quad-core IPQ-4018 716MHz • Size of RAM: 128MB • Storage: 16MB flash • 10/100/1000 Ethernet Ports: 2 • Wireless: 2.4GHz 802.11b/g/n dual-chain, 5 GHz 802.11a/n/ac dual-chain • Wireless Regulations: Specific frequency range will be limited by country regulations • Wireless Antenna Max Gain: 2.5dBi • LTE Antenna Max Gain: 4dBi (with u.FL connector) • Antenna Beam Width: 360° • LTE Category: - • 3G Category: - • 2G Category: - • Micro SIM Slot: 1 • Supported Input Voltage: DC jack 10 - 57 V • PoE In: Passive PoE 18-57V or active 802.3af/at • Dimensions: 185 x 85 x 30 mm • Operating Temperature: -30°C .. +60°C • Operating Systems: RouterOS, License level 4 • MiniPCIe slots: 1 • Max Power Consumption: 11W
    Product Includes
    (1) wAP R ac AP (1) Power Adapter (24V 0.8A) (1) Screw Kits (1) Desktop Stand (1) Metal Ring (1) Plastic Straps (1) Mount Base (1) Gigabit PoE Injector (1) Ceiling Mount Base
    Product Documentation
    RBwAPGR-5HacD2HnD Data Sheet Learn More »
  8. RBLtAP-2HnD MikroTik LtAP Weatherproof Wireless 2.4-5GHz Dual-Band Access Point w/Built in GPS (without LTE card) Front View

    MikroTik LtAP Weatherproof Wireless 2.4-5GHz Dual-Band Access Point w/Built in GPS (without LTE card)

    Regular Price: $129.00

    Special Price: $107.50

    MikroTik LtAP LTE kit is a compact weatherproof wireless access point with a built in cellular modem that supports 4G (LTE) connectivity. Connect to the LtAP’s built-in high power 2.4 GHz 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP LTE kit also has one Gigabit Ethernet LAN port for wired devices. The RS232 serial port gives you console access for debugging. The unit comes with two miniPCIe slots (one already populated with LTE modem), offering many expansion options. For example, you can install second LTE modem for redundancy, or 5 GHz interface to have dual concurrent 2.4 GHz / 5 Ghz AP + LTE. Unit is powered by Dual-Core 880 MHz CPU and 128 MB RAM to deal with heavy loads. Does not include LTE modem
    Features
    • 2.4 GHz AP in a rugged case • LTE installed in miniPCIe slot • Second miniPCIe slot for expansions • Three Mini SIM slots • Gigabit Ethernet port • Built-in GPS • Many powering options (DC jack, POE-in, automotive) • Serial port and full size USB for other devices • Perfect for cars or outdoor mobile applications
    Specifications
    • CPU: Dual-core MediaTek MT7621 880 MHz • Size of RAM: 128 • Storage: 16 MB flash • 10/100/1000 Ethernet Ports: 1 • Wireless: 2.4 GHz 802.11b/g/n dual-chain • Wireless Regulations: Specific frequency range will be limited by country regulations • Wireless Antenna Max Gain: 2.5dBi • LTE Antenna Max Gain: 4 dBi (with u.FL connector) • Antenna Beam Width: 360° • LTE Category: - • 3G Category: - • 2G Category: - • Supported Input Voltage: DC jack or automotive connector 12 - 30 V • PoE In: Passive PoE 12 - 30 V • Dimensions: 170 x 162 x 40 mm • Operating temperature: -40°C .. +70°C • Operating system: RouterOS, License level 4 • Mini SIM slots: 3 • MiniPCIe slot #1: Top slot supports PCIe and USB 2.0 cards, but is shared with the USB 2.0 type A port (can use either USB port or miniPCIe slot at the same time) • MiniPCIe slot #2: Bottom slot supports only USB (2.0 and 3.0) miniPCIe modems (no PCIe support) • USB port: 1 USB 2.0 port type A (can only be used if miniPCIE slot #1 is not used) • Built-in GPS: Yes (external antenna option via MMCX connector) • Serial port: RS232 • Max power consumption: 24W
    Product Includes
    (1) MikroTik LtAP (1) Power Adapter (24V 1.2A) (1) Screw Kits (1) Automotive Cable
    Product Documentation
    MikroTik RBLtAP-2HnD Data Sheet Learn More »
  9. RBwAPG-60ad-SA MikroTik wAP 60Gx3 60GHz Access Point License Level 4

    MikroTik wAP 60Gx3 60GHz Access Point License Level 4

    Regular Price: $199.00

    Special Price: $166.00

    MikroTik wAP 60Gx3 AP is a new access point model for the 60 GHz spectrum. Compared with the regular wAP 60G AP, this new model has a completely new antenna array, with support for much wider angle of coverage and is optimized specifically for multi-point operation. The 96 antenna elements work with beam-forming technology to provide connectivity for up to eight 60 GHz client devices at the same time, in a 180 degree field of view. Build a cost effective point to multi-point setup in the clean 60 GHz wireless spectrum, at a fraction of the cost.
    Two wAP 60Gx3 AP units can be used in point-to-point configurations as well
    Specifications
    • Product Code: RBwAPG-60ad-SA • CPU: 4 core IPQ-4019 716 MHz • RAM: 256 MB • Storage: Flash 16 MB • Dimensions: 185 x 85 x 30 mm • Operating Temperature: -40 C .. +70 C tested • Operating System: RouterOS, license level 4
    Interface
    • 10/100/1000 Ethernet Ports: 1
    Wireless
    • Wireless: Built-in 60 GHz 802.11ad • Antenna beam width: Phase array 180° beamforming
    Powering
    • PoE In: Yes • Supported Input Voltage: 12V - 57V (802.3af/at) • Max Power Consumption: 5W
    Product Includes
    (2) Plastic Straps (1) Screw Kit (1) Power Adapter (24V 0.38A) (1) Mount Bracket (1) Gigabit PoE Injector (1) Metal Ring
    Datasheet
    wAP 60Gx3 AP Learn More »
  10. CRS309-1G-8S+IN MikroTik 8x 10G SFP+ Ports PoE Cloud Router Switch

    MikroTik 8x 10G SFP+ Ports PoE Cloud Router Switch

    Regular Price: $269.00

    Special Price: $235.00

    MikroTik CRS309-1G-8S+ is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps. The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS). The compact and sleek metallic enclosure also acts as a heat sink, making this device passively cooled - no fan noise and no dust accumulation inside. Special rack mount ears for installing unit into the standard rack are provided.
    Specifications
    • Product code CRS309-1G-8S+IN • CPU Dual-core 98DX8208 800 MHz • RAM 512 MB • Storage Flash 16 MB • Switch chip model 98DX8208 • Dimensions 141 x 115 x 28 mm • Operating temperature -40°C .. +70°C tested • Operating system SwOS / RouterOS (Dual boot) • License level 5
    Interfaces
    • 10/100/1000 Ethernet ports 1 • 10G SFP+ ports 8 • Serial port RS232
    Powering
    • PoE in Yes, Passive POE and 802.3af/at compliant • Supported input voltage 12 - 57 V (DC jack), 18 - 57 V (PoE in) • Number of DC jacks 1 • Max power consumption 33 W / 19 W (without attachemnts)
    Product Includes
    (1) CRS309-1G-8S+IN Switch (1) Screw Kit (1) Set of Rack Ears
    Datasheet
    CRS309-1G-8S+IN Learn More »

10 Item(s)

per page

Grid  List 

Set Descending Direction

Back to top