(888) 929-3610
Affordable Wireless Solutions

Wall Mounts

Wall Mounts

Manufacturers of these Wall Mount products include; Grandstream, Laird, Maxxwave, MikroTik, Peplink, Primus Cable, RF Elements, Tycon Power, Ubiquiti, and Yealink.

Items 1 to 10 of 29 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. POE-WM Ubiquiti PoE Injector Mounting Bracket

    Ubiquiti PoE Injector Mounting Bracket

    Regular Price: $1.00

    Special Price: $0.90

    POE-WM Mounting bracket for Ubiquiti Networks PoE Injectors. Learn More »
  2. NBE-WMK Ubiquiti airMAX NanoBeam Wall Mount Kit

    Ubiquiti airMAX NanoBeam Wall Mount Kit

    Regular Price: $3.25

    Special Price: $1.85

    This Ubiquiti NBE-WMK wall mount kit is compatible with airMAX NanoBeam NBE-M2-13, NBE-M5-16, NBE-M5-19, NBE-5AC-16, NBE-5AC-19, and NBE-5AC-Gen2. It enhances the stability for wall-mounting. Learn More »
  3. QM - MikroTik quickMOUNT Wall Mount Adapter (antennas sold separately)

    MikroTik quickMOUNT Wall Mount Adapter

    Regular Price: $5.50

    Special Price: $2.50

    The MikroTik quickMOUNT is a basic wall mount adapter for smaller point to point or sector antennas. The quickMOUNT makes it possible to turn an antenna 190deg. With the quickMOUNT it is possible to simultaneously mount two SXTs, creating an access point repeater and larger sector coverage. You can use the quickMOUNT with any pole mountable device that weighs less than 3lbs. Product Features: • Simple design • Supports SXT, Omnitik, BaseBox or any other pole mountable device • Supports up to two SXT units • The adapter is very durable due to it’s special material composite called anvilNITE. Product Specifications: • Dimensions: 3.78 x 4.23 x 2.2in (96 x 107.5 x 56mm) • Tube diameter: 1.38in (35mm) • Maximum supported antenna weight: 3.31lbs (1.5kg) • Angle turn: 190deg • Operating temperature: -40 to +104deg F (+/-40deg C) • Maximum wind load: 100N Product Compatibility: • MikroTik SXT series • MikroTik OmnTik • Various pole mountable antennas Product Includes: • 1 x QM wall mount • 1 x Mounting ring • 1 x K-41 screw kit Technical Data Sheets and User Manuals: quickMOUNT Data Sheet Learn More »
  4. Tycon Power Green DIN Rail Clip Kit - 2 DIN Rail Clips and Screws

    Tycon Power Green DIN Rail Clip Kit - 2 DIN Rail Clips and Screws

    $4.70

    Green DIN Rail Clip Kit - 2 DIN Rail Clips and Screws Adapts any of Tycon products to DIN Rail mounting. Tycon Power Learning Center Presentation Learn More »
  5.  
    QMP MikroTik quickMOUNT pro Wall Mount Adapter

    MikroTik quickMOUNT pro Wall Mount Adapter

    Regular Price: $9.50

    Special Price: $5.50

    The quickMOUNT pro is an advanced wall mount adapter for small point to point and sector antennas. It can be used to mount on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn antenna within 140deg both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. It can be used with any pole mountable device or MikroTik small mounting clip with weight less than 3.31lbs (1.5kg).
    Product Features:
    • Simple design • Low cost • Supports SXT, Omnitik, BaseBox or any other pole mountable device • The adapter is very durable due to it’s special material composite called anvilNITE.
    Product Specifications:
    • Dimensions: 3.74 x 3.46 x 4.4in (95 x 88 x 112mm) • Tube diameter: 1.38in (35mm) • Maximum supported antenna weight: 3.31lbs (1.5kg) • Angle turn: 140deg • Operating temperature: -40 to +104deg F (+/-40deg C) • Maximum wind load: 100N • Material: anvilNITE
    Product Compatibility:
    • MikroTik SXT series • MikroTik OmnTik • Various pole mountable antennas
    Product Includes:
    • 1 x QMP wall mount
    Technical Data Sheets and User Manuals:
    quickMOUNT pro Data Sheet Learn More »
  6. QME MikroTik quickMOUNT extra Wall Mount Adapter

    MikroTik quickMOUNT extra Wall Mount Adapter

    Regular Price: $9.50

    Special Price: $5.50

    The quickMOUNT extra is an advanced wall mount adapter for large point to point and sector antennas. It can be mounted on the wall or can be used as an adapter from a large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn antenna within 190°. With the quickMOUNT extra is compatible with our long range heavy antennas like 30dBi parabolic dish mANT 30 or 19dBi sector mANT 19s. You can use the quickMOUNT extra with any pole mountable device with weight less than 17.64lbs (8kg).
    Product Features:
    • Simple and low cost • Supports mANT, SXT, Omnitik, BaseBox, DynaDish or any other pole mountable device • The adapter is very durable due to it’s special material composite - anvilNITE
    Product Specifications:
    • Dimensions: 4 x 5.3 x 5.9in (102 x 135 x 150mm) • Tube diameter: 1.38in (35mm) • Max Tube diameter: 2.76in (70mm) • Maximum supported antenna weight: 17.64lbs (8kg) • Angle turn: 190deg • Operating temperature: -40 to +104deg F (+/-40deg C) • Maximum wind load: 100N • Material: anvilNITE
    Product Compatibility:
    • MikroTik SXT series • MikroTik OmnTik • MikroTik mANT • MikroTik DynaDish
    Product Includes:
    • 1 x QME wall mount
    Technical Data Sheets and User Manuals:
    quickMOUNT extra Data Sheet Learn More »
  7.  
    QMP-LHG MikroTik quickMOUNT Pro Light Head Grid Wall Mount Adapter

    MikroTik quickMOUNT Pro Light Head Grid Wall Mount Adapter

    Regular Price: $9.50

    Special Price: $5.50

    The quickMOUNT pro is an advanced wall or pole mount adapter for small point to point and sector antennas. It gives the possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. Product Features • It's simple and low cost • Adjustable horizontally and vertically • Wall or pole mountable • Durable due to it's special plastic composite material - anvilNITE (TM) Product Specifications • Dimensions 95 x 88 x 112 mm (3.75 x 3.5 x 4.4 in.) • Tube diameter: 35 mm (1.4 in.) • Max tube diameter to which mount can be attached: 65 mm (2.56 in.) • Maximum antenna weight: 1.5 kg • Maximum wind load: 100 N • Turn angle for MikroTik products: 140° • Compatible devices: LHG 5 • anvilNITE Product Includes • (4) 6x30mm wall anchor • (4) Self tapping screw • (4) M6x20 buton head screw • (4) M6 locking nut • (1) 50-70mm hose clamp
    Technical Data Sheets and User Manuals:
    QMP-LHG data sheet Learn More »
  8. Laird Wall Mount Bracket 8" stand off, 1.25" O

    Laird Wall Mount Bracket 8" stand off, 1.25" O

    Regular Price: $6.95

    Special Price: $6.00

    WMB Wall Mount Bracket - For mounting a pole mount antenna to a wall. 8"standoff from wall, 1.25" diameter mounting tube.


    Antenna Wall Mount Bracket

    The WMB Universal Wall Mounting Brackets are constructed of zinc plated steel for long service life. The mount seams are welded for durability. The mount WMB-8 provides 8" of standoff from the wall and supports over 35LBs. The mount is attached to the wall with two screws and can be mounted very quickly. The industry standard 1.25" mount diameter allows mounting of most pole type mount antennas. Typically the pole mount type antenna has a bracket which accommodates full tilt and azimuth adjustment. Technical Data Sheets and User Manuals: WMB Data Sheet Learn More »
  9. Tycon Wireless WMB-HD Heavy Duty Wall Mount Bracket 1.5" Diameter Pole 8" Extension

    Tycon Wireless WMB-HD Heavy Duty Wall Mount Bracket 1.5" Diameter Pole 8" Extension

    $6.60

    Features

    • 1.5" Diameter x 4" Mounting Surface
    • 8" Standoff From Wall or Pole
    • Heavy Zinc Plated Steel

    Applications

    • Antenna Mounting
    • Surveillance Cameras
    • Wireless Radio Mounting
    • Lighting Applications
    Product Data Sheet Tycon Power Learning Center Presentation Learn More »
  10. RB2011-H MikroTik Wall Mount Kit for RB2011

    MikroTik Wall Mount Kit for RB2011 RBWMK (K-22)

    Regular Price: $8.95

    Special Price: $6.75

    MikroTik RB2011 wall mount kit (product code RB2011-H) secures your RB2011 installation by protecting the cables from unplugging, ideal for public installations such as shared server rooms, attics, accessible closets and cabinets. Fits all standard RB2011 desktop cases (models RB2011iL-IN, RB2011iLS-IN, RB2011UiAS-IN and RB2011UiAS-2HnD-IN), protects all ten Ethernet ports, SFP port and Serial port. Note: only fits self crimped Ethernet cables; rubber feet must be removed from the router before fitting into the mount. Wall mount kit for RB2011 desktop series, Protects cables, Powder coated steel Learn More »

Items 1 to 10 of 29 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction

Back to top