C600500C024A Cambium cnWave V3000 802.11ay 60GHz Client Node Radio Only - side (Antenna Assembly Sold Separately)

Cambium cnWave V3000 802.11ay 60GHz Client Node Radio Only

Cambium cnWave V3000 802.11ay 60GHz Client Node Radio Only

SKU
C600500C024A
Availability: Usually ships the same day Pre order - Direct ship from manufacturer.
The Cambium V3000 is featured with a 44.5 dBi high-gain antenna with beamforming. The client nodes can support up to 7.6 Gbps with channel bonding for both PMP and PTP configurations.

Antenna Assembly (C600500D001A) and Power Supply Unit (N000065L001C) Sold Separately
$643.93
Cambium Networks’ 60 GHz cnWave solution provides easy, fast and cost-effective wireless gigabit connectivity for edge access and/or high-capacity backhaul for edge access solutions at a significantly lower TCO than fiber infrastructure. Service providers and enterprises now have access to gigabit for business and residential connectivity, backhaul for Wi-Fi access or LTE/5G small cell. Certified for Facebook Terragraph, cnWave mesh solutions are highly efficient at handling high-density deployments in cities and suburban areas.

The Cambium V3000 is featured with a 44.5 dBi high-gain antenna with beamforming. The client nodes can support up to 7.6 Gbps with channel bonding for both PMP and PTP configurations.

Antenna Assembly (C600500D001A) and Power Supply Unit (N000065L001C) Sold Separately

Product Features

• Supports 57 to 66 GHz
• Up to 7.6 Gbps (3.8 Gbps UL and 3.8 Gbps DL) with channel bonding
• Easy installation with auto beamforming
• Low latency < 1 ms
• 802.11ay technology with Terragraph certification
Physical
• Environmental: IP66/67
• Temperature: -40°C to 60°C (-40° to 140°)
• Mean Time Between Failure: > 40 years
• Wind Survival: 200 km/h (124 mph)

Product Specifications

Spectrum
• Frequency Range: 57 to 66 GHz in a single SKU
• Channel Width: 2.16 GHz
• Carrier Bonding: Up to 2 adjacent channels
• Mode of Operation: PMP or Mesh, PTP
Interface
• Channel Access: TDMA/ TDD
• Ethernet Interface:
• (1) 100/1000 BaseT with PoE In
• (1) 100/1000 BaseT with 802.3at PoE Out
• (1) SFP+
Ethernet
• Protocol Supported: IPv4, IPv6
• Network Management: cnMaestro, HTTP, HTTPS, SNMP v2c & v3
• MTU: 4,000 bytes
Security
• Encryption: 128-bit AES
• Firmware Security: Signed Firmware Images
Performance
• Modulation & Coding Schemes: MCS-0 (BPSK) to MCS-12 (16-QAM)
• Latency: < 1 ms
• Max. EIRP: 60.5 dBm
Antenna
• Gain: 44.5 dBi
• Type: Integrated
• Beamforming Scan Range: ±2° azimuth, ±1° elevation
• Beam Width: 0.8°
Powering
• Type: Passive PoE (42-57V) without AUX PoE Out in use
• Power Consumption:
• 55W with AUX PoE Out in use
• 30W without AUX PoE Out in use

Product Includes

(1) V3000 Radio Assembly
(1) M25 Cable gland
(8) Screws
(1) Package Leaflet

Product Documentation

cnWave V3000 Data Sheet
More Information
SKU C600500C024A
Datasheet https://www.balticnetworks.com/docs/data_sheet_cnWave_V3000.pdf
Manufacturer Cambium Networks
Country of Manufacture China
Large or Oversize Package No
HTS Code 8517.62.0000
ECCN 5A991
We found other products you might like!