(888) 929-3610
Affordable Wireless Solutions

MikroTik Solutions

MikroTik Solutions

MikroTik Solutions includes products from HotLava, MikroTik, ITElite, Maxxwave, RF Elements, Tycon Power, and of course MikroTik. These products either incorporate MikroTik products, or they are designed to seamlessly work with MikroTik products.

7 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Maxxwave 3G Embedded M2M USB Modem (antennas not included)

    Maxxwave 3G Embedded Sprint M2M USB Modem

    Regular Price: $149.95

    Special Price: $50.00

    MaxxWave 3G Embedded M2M USB Modem is built to work specifically with the Sprint 3G Broadband Data Network. As a low cost device, it will accelerate your application development into the M2M world. By using industry modem standards, it allows for compatibility for a wide range of operating systems and devices. Available drivers for Windows, Linux, RouterOS, Windows CE, and Android are available, as well as being compatible with other Maxxwave products. The 3G Modem performs like you’re using embedded module hardware, but is pre-certified, so you don’t have to go through the certification process. By using a standard USB interface, our M2M modem will allow you to connect to a wide range of devices. No external power is required, as the device will draw power from the USB port. Product Specifications: • Chipset: ZTE MC2718 • CDMA Dual Band: 800/1900MHz • GPS One • Data Interface: USB 2.0 Mini B Connector • Activity: 1 x LED • Power: USB 2.5W Max. • Antenna Connectors: SMA Female x 2 - Primary and Diversity • Dimensions: 2.7" x 2.25" x 0.4" • Weight:1.4 oz • Operating Temperature: -22°F to 167°F (-30°C to 75°C) • Storage Temperature: -40°F to 185°F (-40°C to 85°C) Performance: • Current Consumption Typical:       Idle Current: 7mA @ -75dBm       Call Current: 235mA @ -75dBm       Max Current: 650mA @-105.5dBm • TX Power:       800MHz: (23dBm - 30dBm) @ -105.5dBm       19000MHz: (18dBm - 27dBm) @ -105.5dBm • RX Sensitivity:       (-105.5dBm - 104dBm) @ FER 0.5% Operating System Support: • Windows™ XP 32 and 64 bit • Windows™ Vista 32 and 64 bit • Windows™ 7 32 and 64 bit • Linux • Router OS • Windows CE • Android • Windows™ 8 32 and 64 bit Regulatory & Approvals: • FCC (15,22,24) • CDG 1 & 2 • RoHS compliant • Carrier: Sprint Product Includes: (1) Maxxwave Sprint M2M Modem (1) 20" USB Cable Connection (2) Maxxwave Right Angle 3G/4G Antenna's (P/N MW-SMA-RA-LTE-ANT-2) Technical Data Sheets and User Manuals: MaxxWave 3G Embedded M2M USB Modem Data Sheet Operating System Drivers: MaxxWave 3G-MDM-2718 Latest Drivers Learn More »
  2.  
    Maxxwave IO Controller with Temperature and Humidity Sensor

    Maxxwave IO Controller with Temperature and Humidity Sensor

    Regular Price: $159.95

    Special Price: $87.00

    When you're looking for a general purpose Input / Output control board that needs to be well connected to the outside world, look no further than the Maxxwave IO Control Board. We built this board from the ground up to work in a variety of M2M applications, such as security, energy management, solar battery monitoring, industrial automation, and remote management. Our layered approach gives you the most flexibility to providing endpoint management of devices. The entire board is host powered by 5V USB. An optional outdoor enclosure is available for use in harsh environments. Our board works by emulating a serial port over USB and allows you to write applications to our standards "AT" style command structure. By doing so, you can monitor battery voltage of a remote site, check remote equipment alarm conditions and even check how much current you're drawing in real time from an AC panel. It can also check to see if a door is open or control a gate. The possibilities are limitless. It also has the ability to monitor the temperature and humidity of a room or outdoor environment. Product Features: • Internal Digital Temperature / Humidity Sensor • External Temperature Probe Connection • (2) AC Current Monitors (0-20 A) • (4) SPDT Relays, Rated 2A, 24Vdc • (3) Digital Inputs • (2) DC Volt Inputs (0-56Vdc) • (3) Digital Counters with Setpoints • Internal Fan Control (Powered 5V Fan) • Lighted Input / Relay LED's • Power LED, System Heartbeat LED • Reset Switch • Field Firmware Upgradable • Event Drive Setpoints Mechanical / Environmental: • Operating Temperature: -25°C to 65°C • Dimensions: 100mm x 90mm • Weight: 0.15 lbs • Power: 5Vdc, 500mA Max Product Includes: (1) Maxxwave I/O Control PCB (1) USB Serial Interface Cable Technical Data Sheets and User Manuals: Maxxwave I/O Control Board Data Sheet Maxxwave I/O Control Board User Manual Learn More »
  3. MW-UBTik-CUSTOM 911G 2 or 5GHz

    Maxxwave UBTik 5GHz HP 802.11ac MiMO MikroTik Access Point for Ubiquiti Antennas

    From: $148.34

    To: $183.28

    Out of stock

    This Maxxwave UBTik is now powered by your choice of MikroTik 911 or 912 series RouterBOARD. Finally, a carrier-class antenna system to work with MikroTik! UBTik's unique design makes it possible for a MikroTik RouterBOARD to mount onto the back of most Ubiquiti antennas, taking advantage of one of the best carrier-class antenna systems available on the market today. An instant MikroTik PtP is at your fingertips. Simply clip-on, plug-in and play! **not intended for use with Ubiquiti mid-range sector antennas (AM-5G16 or AM-5G17) UBTik includes: 1 x NEMA 4 outdoor sealed, lightweight aluminum enclosure, made in the USA 1 x RB911 or RB912 series RouterBOARD 2 x MMCX to RP-SMA weatherproof connectors 1 x 24Vdc switching power supply (US plug) 1 x Grounding lug with nut 1 x RJ45 passthrough connector 1 x Gigabit passive PoE injector 2 x RP-SMA to RP-SMA weatherproof jumper cables (included with the antennas) UBTik features: UBTik combines MikroTik and Ubiquiti antenna technologies: MikroTik RouterOS and Ubiquiti carrier-class antenna systems. You won’t find anything like this for MikroTik anywhere else. • Speeds over 1Gbps! • New lightweight, corrosion-resistant, weatherproof aluminum enclosure. No more RF leakage or RF interference on your sectored tower! • Improved seal mounted directly inside of UBTik's cover • New mounting design also provides for pole/mast mounting (pipe-clamps sold separately) • UBTik enclosure mounting is uniquely designed to clip directly onto the back of most Ubiquiti antennas • UBTik enclosure features a white powder coated finish for high aesthetics and quick disconnect thumb screws for easy access to its contents • UBTik enclosure aluminum design ensures no RF leakage for adjacent RF channels on a sectored tower • (2) SMA-type and (2) N-type knock-outs at the bottom of the UBTik enclosure • (2) SMA-type and (2) N-type knock-outs at the top of the UBTik enclosure • The enclosures exterior dimensions: 6.50" L x 5.75" W x 2" D (19.7 x 14.6 x 5.1cm) • The enclosures interior dimensions: 6.375" L x 4.25" W x 1.4" D (16.2 x 10.79 x 0.55cm) • MikroTik RouterOS level 3 license • The most affordable way to run MPLS across your entire wireless network! • MikroTik product warranty applies Technical data Sheets and User Manuals UBTik 5G HP MiMO Data Sheet Technical support information MikroTik technical support information UBTik™ is a registered trademark of Maxxwave Inc., all rights reserved. Patent pending. Learn More »
  4. Maxxwave MW-UBTik-AC inside

    Maxxwave UBTik AC 5GHz HP MiMO 802.11AC MikroTik Access Point for Ubiquiti Antennas

    From: $169.59

    To: $201.28

    Out of stock

    This Maxxwave UBTik is now powered by the new MikroTik RB922UAGS-5HPacD RouterBOARD. New features include: • More than 1W of output power! • Faster processor with 720MHz of CPU power • 802.11AC Speeds • Improved metal LAN port Finally, a carrier-class antenna system to work with MikroTik! UBTik's unique design makes it possible for a MikroTik RouterBOARD to mount onto the back of most Ubiquiti antennas, taking advantage of one of the best carrier-class antenna systems available on the market today. An instant MikroTik PtP is at your fingertips. Simply clip-on, plug-in and play! **not intended for use with Ubiquiti mid-range sector antennas (AM-5G16 or AM-5G17) UBTik includes: (1) NEMA 4 outdoor sealed, lightweight aluminum enclosure, made in the USA (1) MikroTik RouterBOARD RB922UAGS-5HPacD with 720MHz Atheros Processor, 1 Gigabit LAN port, built-in 5Ghz 802.11a/n/ac, and an SFP port (2) MMCX to RP-SMA weatherproof connectors (1) 24V DC switching power supply (US plug) and gigabit passive PoE injector (1) Grounding lug with nut (1) RJ45 pass through connector (2) RP-SMA to RP-SMA patch cables UBTik features: UBTik combines MikroTik and Ubiquiti antenna technologies: MikroTik RouterOS and Ubiquiti carrier-class antenna systems. You won’t find anything like this for MikroTik anywhere else. • Speeds up to 866Mbps! • New lightweight, corrosion-resistant, weatherproof aluminum enclosure. No more RF leakage or RF interference on your sectored tower! • Improved seal mounted directly inside of UBTik's cover • New mounting design also provides for pole/mast mounting (pipe-clamps sold separately) • UBTik enclosure mounting is uniquely designed to clip directly onto the back of most Ubiquiti antennas • UBTik enclosure features a white powder coated finish for high aesthetics and quick disconnect thumb screws for easy access to its contents • UBTik enclosure aluminum design ensures no RF leakage for adjacent RF channels on a sectored tower • (2) SMA-type and (1) N-type knock-outs at the bottom of the UBTik enclosure • (2) SMA-type and (2) N-type knock-outs at the top of the UBTik enclosure • The enclosures exterior dimensions: 6.50" L x 5.75" W x 2" D (19.7 x 14.6 x 5.1cm) • The enclosures interior dimensions: 6.375" L x 4.25" W x 1.4" D (16.2 x 10.79 x 0.55cm) • MikroTik RouterOS level 4 license • The most affordable way to run MPLS across your entire wireless network! • MikroTik product warranty applies Technical data Sheets and User Manuals UBTik 5G HP MiMO Data Sheet Technical support information MikroTik technical support information UBTik™ is a registered trademark of Maxxwave Inc., all rights reserved. Patent pending. Learn More »
  5. Maxxwave MW-DAP

    Maxxwave Dual-Band MiMO Outdoor MikroTik Access Point

    From: $206.34

    To: $217.28

    Out of stock

    Finally, a MikroTik Access Point designed to work with Ubiquiti carrier-class antennas! UBTik unique design makes it possible for a MikroTik RouterBOARD RB922UAGS-5HPacD to mount onto the back of most Ubiquiti antennas**, taking advantage of one of the best carrier-class antenna systems available on the market today. Simply Clip-on, Plug-in and Play! An instant MikroTik AP is at your fingertips. **not intended for use with Ubiquiti mid-range sector antennas (AM-5G16 or AM-5G17) UBTik Dual-Band Includes: (1) NEMA 4 Outdoor Sealed, Lightweight Aluminum Enclosure, made in the USA (1) MikroTik RouterBOARD RB922UAGS-5HPacD with 720MHz Atheros Processor (1) 24Vdc Switching Power Supply (US plug) and Gigabit Passive PoE injector (1) MikroTik R11e-2HPnd 800mW 2.4Ghz 802.11b/g/n (2) MMCX to RP-SMA weatherproof connectors (1) Grounding lug with nut (1) RJ45 passthrough connector (2) RP-SMA to RP-SMA Patch Cables NOTE: Ubiquiti Antenna System not included UBTik Features: UBTik combines MikroTik and Ubiquiti antenna technologies: MikroTik RouterOS and Ubiquiti carrier-class antenna systems. You won’t find anything like this for MikroTik anywhere else. • Speeds up to 866Mbps! • New lightweight, corrosion-resistant, weatherproof aluminum enclosure. No more RF leakage or RF interference on your sectored tower! • Improved seal mounted directly inside of cover • New mounting design also provides for pole/mast mounting (pipe-clamps sold separately) • UBTik enclosure mounting is uniquely designed to clip directly onto the back of most Ubiquiti antennas • UBTik enclosure features a white powder-coated finish for high aesthetics and quick-disconnect thumb screws for easy access to its contents • UBTik enclosure aluminum design ensures no RF leakage for adjacent RF channels on a sectored tower • (2) SMA type and (2) N-type knock-outs at the bottom of the UBTik enclosure • (2) SMA type and (2) N-type knock-outs at the top of the UBTik enclosure • The enclosures exterior dimensions: 6.50" x 5.75" x 2" (19.7 x 14.6 x 5.1 cm) • The enclosures interior dimensions: 6.375"L x 4.25"W x 1.4"D (16.2L x 10.79W x .55D cm) • MikroTik RouterOS Level 4 license • The most affordable way to run MPLS across your entire wireless network! • MikroTik Product Warranty applies Technical Data Sheets and User Manuals UBTik Dual Band MiMO Data Sheet Technical Information and Support MikroTik Technical Support Information UBTik™ is a registered trademark of Maxxwave, Inc. All rights reserved. Patent pending.  Learn More »
  6. Maxxwave 4.9GHz PtP Long-Range Link Starter Kit for Public Safety

    Maxxwave 4.9GHz PtP Backhaul Link Starter Kit for Public Safety Powered by MikroTik

    $455.68

    Out of stock

    MikroTik Long-Range 4.9GHz PtP featuring UBTik and Ubiquiti RocketDish Antenna. UBTik, a MikroTik Access Point has been designed to clip directly in the back of Ubiquiti parabolic dish antenna. It also features, the only FCC-certified miniPCi card for the Public Safety sector. This kit has everything you need. Just add Cat5 cable, plug-in and play! The total output power for this kit is 58dBm This complete PtP link kit Includes: • 2 x UBTik with built-in MikroTik RouterBoard 411GL and DBii F50n-PRO miniPCI card • 2 x Ubiquiti Rocketdish 4.9Ghz 30dBi Parabolic Dish Antennas • 4 x RPSMA to RPSMA weatherproof jumper cables (included with the antennas) • 2 x 24Vdc Switching Power Supplies (US plug) and Gigabit Passive PoE Injectors • All Mounting hardware UBTik Includes: • NEMA 4 Outdoor Sealed Enclosure, made in the USA • MikroTik RouterBOARD RB/411GL with 680MHz Atheros Processor • 24Vdc PoE Injector • DBii F50n-PRO miniPCI card. 500mW output power (the only FCC-certified radio for public safety use) • Grounding Lug • RJ45 Passthrough connector UBTik Features: • Speeds up to 300Mbps! • Quick-disconnect thumb screws for easy access to the enclosure contents • UBTik enclosure dimensions: 6.25in/15.9cm X 4.25in/10.8cm X 1.25in/3.2cm • MikroTik RouterOS Level 4 license • The most affordable way to run MPLS across your entire wireless network! • Lightweight aluminum enclosure ensures no RF leakage for adjacent RF channels on your sectored tower • Utilizes the RF jumpers included with the Ubiquiti antenna • MikroTik Product Warranty applies Ubiquiti RocketDish Antenna System Includes: • Antenna Dish • RPSMA to RPSMA weatherproof jumper cables • Pole/Tower mounting hardware Ubiquiti RocketDish Antenna System Features: Frequency Range: 4.9-5.90 GHz Gain: 28.0-30.25dBi Polarization: Dual Linear Cross-pol Isolation: 35dB min Max VSWR: 1.4:1 Hpol Beamwidth (3dB): 5 deg. Vpol Beamwidth (3dB): 5 deg. F/B Ratio: -34dB ETSI Specification: EN 302 326 DN2 Dimensions: 25.5in (648mm) diameter Weight: 21.6lbs (9.8kg) Wind Survivability: 120 mph Wind loading: 113lb@100mph Technical Data Sheets and User Manuals: Ubiquiti airMAX RocketDish Technical Data Sheet UBTik Data Sheet Learn More »
  7. MW-RM-Vengeance Maxxwave Routermaxx Vengeance Router 8-Port Gigabit Core i7 with Fiber Option

    Maxxwave Routermaxx Vengeance 8-Port Gigabit Core i7 Router with Fiber Option

    As low as: $2,458.73

    Out of stock

    NEW! Custom-built by Maxxwave, this high speed gigabit router is built for performance and is based on industrial strength hardware. By using the latest Core™ i7 technology, we are able to deliver a next-generation router. This router comes with a MikroTik RouterOS CHR P10 license. Easy setup allows you to plug it in and start configuring. Each gigabit port has its own controller on a PCI-E bus. There is a PCI-E 8x expansion slot inside for additional supported cards like the RB44Ge 4-Port or HotLava 4-Port. The router comes with 32GB of RAM (2GB usable with RouterOS v5+). Boot time is less than 30 seconds from power on. Based on the latest Intel C236 Gigabit Chipset, the router has support for 9K jumbo frames, receive-side scaling and checksum offload. The network interface queues are multi-threaded across multiple CPU cores, providing outstanding performance. The RouterMAXX 8 Port Vengeance is not your average router. It provides up to 10Gbs of routing capacity with 8 individual integrated cutting-edge Intel gigabit controllers. Topped off with Quad 3.6GHz cores and 32GB of DDR4 RAM — There is no task too demanding for this router. The 1U Rackmount form factor and RouterOS CHR software provides a rich feature set found only on routers costing 5 times as much. MPLS, OSPF, BGP, PPPoE and OpenVPN are some of the features included. Single and Multi-mode SFP fiber modules sold separately. SFP modules are required for fiber optic functionality. Product Includes: - 1 RouterMaxx 8 Port Fiber Router - 1 Pair of Rackmount Ears - 1 SATA Cable - 1 Power Cord 32GB DDR4 2400 RAM. Easily upgradable to 64GB of DDR4, extra space inside for (2) 2.5" SATA HDDs or (1) 3.5" HDD to build a high-end caching server. With RouterOS CHR, the network interface queues are multi-threaded across multiple CPU cores, providing outstanding performance! Product Specifications: • CPU: LGA1151 socket for 7th Generation Intel® Core™ i7 processor • Processor: Kaby Lake 7th Gen. i7-7700. Speed: 3.6GHz/8M • Chipset: Intel® C236 • RAM: 32GB 2 x 16GB DDR4-2400 • SSD: 500GB mSata Samsung Evo • Ethernet: Eight 10/100/1000 Auto MDI-X (4 bypass) • Expansion: PCI-E 8x, MiniPCI slot • USB: 2 x 3.0 ports on front • Power: 1U redundant 280 W power supply (1+1) • Operating System: VMware OSXi 6.X (free edition) / MikroTik RouterOS CHR P10 (10Gig) as a VM Technical Data Sheets and User Manuals: Maxxwave Routermaxx Vengeance 8-Port Gigabit Core i7 Router with Fiber Option Data Sheet Learn More »

7 Item(s)

per page

Grid  List 

Set Descending Direction

Back to top