C058900B072A Cambium ePMP Bridge-in-a-Box (2 x ePMP Force 180)

Cambium ePMP 5GHz Bridge-in-a-Box (2 x ePMP Force 180)

20dB • Cross Polarization: 15dB Product Documentation ePMP Force 180 Datasheet " />

Cambium ePMP 5GHz Bridge-in-a-Box (2 x ePMP Force 180)

SKU
C058900B072A
Availability: Usually ships the same day In stock - Direct ship from manufacturer.
Cambium Networks Bridge-in-a-Box consists of two ePMP Force 180 subscriber modules packaged together and pre-configured as a bridge, allowing plug-and-play operation in almost all scenarios.
$375.18
Cambium Networks Bridge-in-a-Box consists of two ePMP Force 180 subscriber modules packaged together and pre-configured as a bridge, allowing plug-and-play operation in almost all scenarios. Great for Enterprising connectivity applications (building-to-building, remote WiFi, temporary structures / events, etc.), video surveillance, and casual home use (remote garages, accessory dwelling units, docks, sheds, etc.).

Product Specifications (per ePMP Force 180)
• Channel Spacing: Configurable on 5MHz increments
• Frequency Range: 5GHz: 4910 - 5970MHz (exact frequencies as allowed by local regulations)
• Channel Width: 5/10/20/40MHz
• MAC (Media Access Control) Layer: Cambium Proprietary
• Physical Layer: 2x2 MIMO/OFDM
• Ethernet Interface: 10/1001000BaseT, Compatible with Cambium PoE pinouts and standard PoE pinouts
• Protocols Used: IPv4, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping
• Network Management: Https, SNMPv2c, SSH
• VLAN: 802.1Q with 802.1p priority
• ARQ: Yes
• Nominal Receive Sensitivity (w/FEC) @ 200MHz Channel: MCS0 = -93dBm to MCS15 = -72dBm (per branch)
• Nominal Receive Sensitivity (w/FEC) @ 40MHz Channel: MCS0 = -90dBm to MCS15 = -69dBm (per branch)
• Modulation Levels (adaptive): MCS0 (BPSK) to MCS15 (64QAM 5/6)
• Quality of Service: Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP and MAC Address, Broadcast, Multicast, and Station Priority
• Transmit Power Range: -17 to +30dBm (combined, to regional EIRP limit) (1dB interval)
• Integrated Antenna Peak Gain: 16dBi
• Maximum Transmit Power: 30dBm combined (subject to regional regulatory restrictions)
• Antenna Connection: Integrated Antenna
• Surge Suppression: 2 Joule Integrated
• Environmental: IP55
• Temperature: -30 to 60°C (-22 to 140°F)
• Weight: 0.50kg (1.1lbs) (includes mounting bracket)
• Wind Survival: 145km/h (90mi/h) with antenna
• Dimensions: 12.4 x 25.1 x 11.9cm (4.9 x 9.9 x 4.7") - with mounting bracket attached
• Pole Diameter Range: 1 to 1.6" (2.5 to 4.1cm) with included clamp; up to 2.25" (5.7cm) with larger clamp
• Power Consumption: 10W Maximum, 5W Typical
• Input Voltage: 10 to 30V
• Encryption: 128-bit AES (CCMP mode)
• Antenna Type: Integrated
• Typical Gain: 16dBi
• 3dB Beamwidth-Azimuth: 15°
• 3dB Beamwidth-Elevation: 30°
• Polarizations: Dual Linear, H/V
• Front-to-Back Isolation: >20dB
• Cross Polarization: 15dB

Product Documentation
ePMP Force 180 Datasheet
More Information
SKU C058900B072A
Manufacturer Cambium Networks
Country of Manufacture China
Large or Oversize Package No
HTS Code 8517.69.0000
ECCN EAR99
UPC 867830000316