Cambium ePMP 3000 4910-5970MHz 4x4 MU-MIMO 1.2Gbps Throughput Access Point (FCC, US/CA version)

Cambium Networks’ ePMP 3000 is a 4X4 MU-MIMO access point that can double the throughput at the sector level with the same channel bandwidth by serving two subscribers at the same time. In addition, the ePMP 3000 continues interference mitigation techniques with support of the beam steering antenna for uplink, dynamic filtering for neighboring channel interference, and the robust software from the ePMP product line. The ePMP 3000 AP system consists of the ePMP 3000 AP, a 4X4 sector antenna, optional beam steering antenna and a 25 dBi and 16 dBi subscriber modules. The ePMP 3000 system boasts high packet per second performance, peak throughput of 1.2 Gbps and supporting subscriber modules with 600 Mbps of peak throughput.

Product Features:

• MU-MIMO support with peak throughput of 1.2 Gbps
• 256QAM-5/6, 80 MHz support
• Supports a wide frequency range: 4910 – 5970 MHz
• 802.3at compliant 100/1000BaseT interface
• Frequency re-use with GPS sync, interference mitigation with beam steering antenna and dynamic filtering

• Model/Part #
• Channel Spacing Configurable on 5 MHz increments
• Frequency Range 4910 – 5980 MHz (exact frequencies as allowed by local regulations)
• Channel Width 20 | 40 | 80 MHz
• MAC (Media Access Control) Layer Cambium Proprietary
• Physical Layer 4X4 MUMIMO/OFDM
• Ethernet Interfaced 100/1000BaseT, rate auto negotiated, 802.3at compliant & Aux SFP port
• Powering Methods Supported 56 V PoE (included), standard 802.3at PoE Supply, or CMM5 with 56 V and 5 pin to 7 pin cross over cable adapter
• Protocols Used IPv4/IPV6 , UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping
• Network Management HTTPs, SNMPv2c, SSH
• VLAN 802.1Q with 802.1p priority
• Subscribers per Sector Up to 120
• ARQ Yes
• Nominal Receive Sensitivity (w/FEC) @20 MHz Channel MCS 0 , -92 MCS 8 supported by Wi-Fi -68
• Nominal Receive Sensitivity (w/FEC) @40 MHz Channel MCS0, -89 MCS9, -64
• Nominal Receive Sensitivity (w/FEC) @80 MHz Channel MCS0, -86, MCS9 - 61
• Modulation Levels (Adaptive) MCS0 (BPSK) to MCS 9 (256 QAM 5/6)
• GPS Synchronization Yes, via Internal GPS or Cambium Sync (Internal GPS receiver also contains a patch antenna and can be used without the external puck antenna)
• Quality of Service Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority, MIR/CIR support*
• DSO* Dynamic Spectrum Optimization. Ability to change channels based on interference detection on current channel
• Fast DFS* Change to alternate radar free channel with background availability check
• Antenna Sector Antenna (C050910D301A ) Available
• Transmit Power Range 0 to +32 dBm (combined, to regional EIRP limit) (2 dB interval)
• Sector Antenna Connection 4 x 50 ohm, RP (Reverse Polarity) SMA
• Beamforming Antenna Connection 2 x 50 ohm, RP (Reverse Polarity) SMA, DC Coupled (powering antenna)
• GPS Antenna Connection 1 x 50 ohm, RP (Reverse Polarity) SMA
• Surge Suppression 1 Joule Integrated. C000000L033A - 56V Gigabit surge suppressor recommended for optimal surge protection
• Environmental IP55
• Temperature -30°C to +55°C (-22°F to +131°F)
• Power Consumption 25 W Maximum 1
• Input Voltage 44 V to 59 V
• Weight 0.7 kg (1.5 lbs) without brackets
• Dimensions (L x W x H) 22.2 x 12.4 x 4.5 cm (8.75 x 4.9 x 1.75 in) without brackets
• Encryption 128 bit AES (CCMP mode)
• FCCID Z8H-89FT0024**: INDUSTRY CANADA 109W-0024**, CE EN 301 893 V2.1.1 (5.4 GHz), EN 302 502 V2.1.1 (5.8 GHz)**

• (1) ePMP 3000 Access Point
• (1) User Manual