(888) 929-3610
Affordable Wireless Solutions

FW-300i-SK - BLiNQ Networks FW-300i 3.5GHz Band 48 CBRS Complete Solution Starter Kit

Availability: In Stock

Price as configured: $0.00


This product ships directly from the manufacturer's distribution center in New Jersey
wisp consulting wisp managed services
BLiNQ Networks FW-300i 3.5GHz LTE Band 48 CBRS complete solution starter kit comes with everything you need to deploy a wireless network for wireless internet service providers! BLiNQ solution enables smooth transition to CBRS and/or UNII band operation drastically reducing service provider network upgrade costs. the FW-300i carrier aggregation license is included with this starter kit.

BLiNQ Networks 3.5GHz Starter Kit Includes

(1) FW-300i Base Unit
(1) FW-300i Embedded EPC License Key
(1) FWC-110-35 Outdoor CPE
(1) FWC-110HG-35 Outdoor High Gain CPE
(2) FWC-SIM-NR1 Sim Cards
(1) AC Power Kit
(8) Washers 1/4in
(8) Socket Head Cap Screws 1/4in.-20, 5/8in.L
(4) Washers 3/8in
(4) Hex Nuts 3/8in. -16
(1) Universal Pole/Wall Mounting Kit

FW-300i Features

• Service Providers: Expand your network and fill in coverage gaps with affordable, easy to deploy solution
• Cable Providers: Offer mobility services by adding wireless products to your existing infrastructure
• Rural Network Providers: Build your own network and see ROI in months with simple to deploy wireless networks solutions
• Brings massive capacity and standard LTE together
• Lowers installation time and operational cost by up to 6x
• Works with any LTE CPE on the market
• Integrated antennas are built-in for a "cell-in-a-box" solution
• Outperforms competitors in a frequency-2 reuse scenario
• Delivers the best cost per gigabit air capacity in the industry

FW-300i Specifications

• Frequency Band: TDD LTE Bands 42/43/48
• Transmit Power (Bands 42, 43) *: Max 33 dBm / sector of 60deg, 17 dBi Integrated Antenna -> 50 dBm EIRP/Sector
• Channel Bandwidth: 10, 20MHz (15 MHz Road-map Support)
• MIMO: 6Tx x 6Rx (several possible MIMO configurations)
• LTE Compliance: 3GPP Release 10 (SW upgrade up to Release 13)
• Connected/Active UEs: Up to 96 active users per sector. 288 active users per Box
• Carrier Aggregation: Supports contiguous and non-contiguous 1CC, 2CC, 3CC, over entire band
• Throughput DL TDD: 3GPP Release 10 (SW upgrade to Release 13)
• Throughput UL TDD: 3GPP Release 10 (SW upgrade to Release 13)
• Operating Mode: TD-LTE
• Power: Consumption (Band 46) 80W max.
• Power: Consumption (Band 42,43,48) 150W max.
• Power: 48V DC
• Connectivity: Default: 1 x Copper 1000BaseT & 1 x SFP
• Synchronization Integral GPS receiver (GPS GLONASS BeiDou), Extra PPS Port,
• Optional: External GPS, 1588v2
• CBRS: CBSD Type B SAS Support, Integrated Domain Proxy SAS
• Embedded EPC: Software Option
• Configuration: WebUI / CLI, Radio and Ethernet performance monitoring
• EMS Integration: SNMP v2c/v3
• OAM Protocols: NetConf, HTTP(S), TCP/IP, UDP, (S)FTP, SSH, TR-069/TR-196
• Gain: 17dBi
• Azimuth coverage (-5dB): 180°
• Azimuth Beam-width (-3dB): 45°
• Azimuth Beam-width (-5dB): 60°
• Elevation Beam-width (- 3dB): 10°
• Electrical Down-tilt: 0°
• Azimuth Side-lobe < -25 dB (Typ.)
• Front-to-Back Ratio @180° > 30 dB (Typ.)
• Co-Polar Port-to-Port Isolation 15 dB (Typ.)
• Cross-Polarization Port-to- Port Isolation: > 20dB (Typ.)
• Max. VSWR: 1.5:1
• Polarization: Dual Pol 45°
• Lightning Protection: DC Ground
• Dimensions (LxWxD): 350x570x227 mm (13.78”x22.4”x8.9”)
• Survival Wind Speed: > 200 km/hr
• Weight: 12.0 kg
• Operational Temperature: -40 to 60 °C
• Mechanical Up/Down Tilt: 0°, 5°, 10°

FW-300i Diagram

BLiNQ Networks FW-35-CPE 3.5GHz Outdoor CAT6 LTE


FW-35-CPE Specifications

• Base Module FWC-110-35
• Peak Throughput 220 Mbps (Config 2-7)
• Carrier Aggregation 2CC up to 20 MHz each
• Frequency Band TDD LTE Bands 42, 43, 48
• Transmit Power Up to +23 dBm
• Tx Power Dynamic Range 63 dB
• Receiver Sensitivity -93-95 dBm
• Integrated Antenna Peak Gain 15 dBi
• Channel Bandwidth/Carrier 5, 10, 15, 20MHz
• MIMO 1Tx x 2Rx (TX switched diversity)
• LTE Compliance 3GPP Release 10 ( SW Upgrade to 11)

FW-35-CPE Mechanical & Regulatory

• Dimensions (LxWxH) 27714075 mm (10.9"5.5"2.9")
• PoE 802.3at
• Survival Wind Speed > 200 km/hr
• Weight 1.1 Kg
• Operating Humidity 5 to 95
• Operational Temperature -40 to 55 °C
• MTBF ODU 300,000 at 55 ͦC
• LTE EN 301 908-1 V5.2.1 & EN 301 908-13 V6.2.1
• Safety EN60950-1
• EMC EN 301 489-1/-4/-17/-24
• Environmental IP67

FW-35-CPE Networking and OAM

• Ethernet Ports 802.3/802.3u/802.3ab
• SIM Function 1.8V, 3V SIM and USIM card
• PIN/PUK Code Yes
• Stack IPv4 , IPv6 , Dual
• •NAT/Dynamic NAT Yes
• Router Mode Yes
• Bridge Mode Yes
• Tunnel Mode GRE, L2TP, IPsec, PPTP -available per request
• DHCP Server in LAN Yes (253 clients)
• DNS Relay Yes
• DDNS Client Yes
• VPN Pass-Through – IPSec/PPTP/L2TP Yes
• UPNP Yes
• HTTP Server Yes
• ALG Support (FTP/SIP/…) Yes
• Networking Debug/Testing IPerf, Ping , Trace route

FW-35-CPE Device Management & Security

• WEB Yes
• SNMP Yes
• TR-069 (TR-0143) Yes (road-map)
• FOTA Upgrade Yes
• System Log/Diagnostic Yes (chipset embedded tool)
• User Name/Password Configuration Yes
• L2/L3 Firewall Basic/Port Forwarding/Port Trigger/DMS / Remote
• WAN Ping / Remote Web Access Control

BLiNQ Networks FW-35-CPE 3.5GHz Outdoor High Gain CPE CAT6 LTE


FWC-110HG-35 Outdoor High Gain CPE Specifications

• Base Modul: FWC-110HG-35
• Peak Throughput: 220 Mbps (Config 2-7)
• Carrier Aggregation 2CC up to 20 MHz each
• Frequency Band TDD LTE Bands 42, 43, 48
• Transmit Power Up to +23 dBm
• Tx Power Dynamic Range 63 dB
• Receiver Sensitivity -93-95 dBm
• Integrated Antenna Peak Gain 20 ± 1.0dBi
• Channel Bandwidth/Carrier 10, 20MHz
• MIMO DL MIMO 2x2 & 4x2
• LTE Compliance 3GPP Release 10 & 11

FWC-110HG-35 Outdoor High Gain CPE Mechanical & Regulatory

• Dimensions (LxWxH) 340 (L) 340 (W) 75(H)mm w/o mounting rib
• PoE 802.3at
• Survival Wind Speed > 200 km/hr
• Weight 2 Kg
• Operating Humidity 5 to 95
• Operational Temperature -40 to 55 °C
• MTBF ODU 300,000 at 55 ͦC
• LTE EN 301 908-1 V11.1.1 EN 301 908-13 V11.1.1
• Safety IEC 60950-1/EN 60950-1
• EMC Draft EN 301 489-52 V.1.1.0
• Environmental IP67

FWC-110HG-35 Outdoor High Gain CPE Networking & OAM

• Ethernet Ports 802.3, IEEE 802.3u, IEEE 802.3ab
• SIM Function 1.8V, 3V SIM and USIM card
• PIN/PUK Code Yes
• Stack IPv4 , IPv6 , Dual
• NAT/Dynamic NAT Yes
• Router Mode Yes
• Bridge Mode Yes
• Tunnel Mode GRE, L2TP, IPsec, PPTP -available per request
• DHCP Server in LAN Yes (253 clients)
• DNS Relay Yes
• DDNS Client Yes
• VPN Pass-Through – IPSec/PPTP/L2TP Yes
• UPNP Yes
• HTTP Server Yes
• ALG Support (FTP/SIP/…) Yes
• Networking Debug/Testing IPerf, Ping , Trace-route

FWC-110HG-35 Outdoor High Gain CPE Device Management & Security

• WEB Yes
• SNMP Yes
• TR-069 (TR-0143) Yes (ready for IOT)
• FOTA Upgrade Yes (IOT with different network )
• System Log/Diagnostic Yes (chip set embedded tool)
• User Name/Password Configuration Yes
• L2/L3 Firewall Basic/Port Forwarding/Port Trigger/DMS / Remote
• WAN Ping / Remote Web Access Control



Product Documentation

BLiNQ Networks FW-300i User Guide
BLiNQ Networks FW-300i Data Sheet
BLiNQ Networks FWC-110-35 Data Sheet
BLiNQ Networks FWC-110HG-35 Data Sheet
BLiNQ Networks FW-300i Quick Installation Guide
BLiNQ Networks System Installation Guide
BLiNQ Networks SIM Provisioning Guide

This product is bulky and ships LTL Freight. Call for 630-929-3610 for a shipping quote.

BLiNQ Networks FW-300i 3.5GHz LTE CBRS Base Unit Antenna 17dBi Bands 48 (without embedded EPC)   +$7,000.00
BLiNQ Networks FW-35-CPE 3.5GHz Outdoor CAT6 LTE 15dBi MIMO CPE Band 42/43/48   +$225.00
BLiNQ Networks FW-35-CPE 3.5GHz Outdoor High Gain 20+/-1.0dBi CPE CAT6 LTE MIMO Band 42/43/48   +$300.00
BLiNQ Networks Generic Pre-Programmed SIM Cards for CPE Non-Roaming   +$10.00
BLiNQ Networks FW-300i Embedded EPC License Key   +$750.00
BLiNQ Networks AC Power Supply for FW-300i   +$250.00

* Required Fields

Price as configured: $0.00


Available Services For This Product

BLiNQ Networks FW-300i 3.5GHz LTE Band 48 CBRS complete solution starter kit comes with everything you need to deploy a wireless network for wireless internet service providers!
SKU FW-300i-SK
Manufacturer BLiNQ Networks
Country of Manufacture China
Large or Oversize Package No
HTS Code 8517.69.0000
ECCN EAR99
CCATS No
UPC No
You may also be interested in the following product(s)

Back to top