The TP-DCDC-xx48DX2-HP and TP-POE-HP-48DX2 are unique high power PoE injectors with Dual 802.3af/at compatible outputs.
This means that two devices can be powered from a single PoE injector. The data path between the units is handled by the injector so no PoE switch is required.
There are models that will run on 12VDC or 24VDC as well as 110/220VAC grid power. The different models have different total outputs up to 70W.
They have two inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for short circuit, overload and surges caused by ESD or lightning. The built-in surge protection protects sensitive connected devices from damage due to surges on data and PoE lines. All 8 wires are protected.
The input voltage and output voltage are isolated to avoid any grounding or negative voltage issues.
Input voltage 12VDC, 24VDC or 110VAC
Dual 802.3af/at outputs
High power output to 70W
Surge protected to 15kV
Dual DC inputs for connecting 2 power sources
10/100 Data compatibility, shielded connectors
Short circuit, over current and reverse/over voltage protection
Industrial temperature range, DIN rail mountable
12VDC or 24VDC Remote power systems running on batteries
110/220VAC Backup power systems
Power a camera and wireless using a single PoE injector
Power a wireless AP and backhaul using a single PoE injector
• Input voltage +/- 18VDC to 36VDC
• Input connector: Screw type compression wire terminal (12 AWG Max)
• POE specification: Active PoE 802.3af/at (Mode B, 2 Pair)
• Output voltage (+/-2.5%): 56VDC
• Data in & Data/POE output connector: RJ45 (Shielded)
• Output current (max): 0.63A X 2
• Output power (total): 70W
• Self-consumption power: 2W
• Efficiency (min): 80%
• Line regulation, ripple, noise: 1%
• Load regulation: 5%
• Surge protection: IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact), IEC61000-4-4 (EFT) 40A (5/50ns), IEC61000-4-5 (Lightning) 20A (8/20μs)
• EMC standards: FCC Class A EN55022 Class A
• Safety standards: UL1950, CSA 22.2 &TUV EN60950
• Operating temperature: -25 to +50°C (-13 to122°)
• Operating humidity (RH): 5% - 90%
• Storage temperature: -40 to +80°C (-40 to +176°F)
• Dimensions (LxWxH): 125 x 75 x 38mm (4.9 x 3 x 1.5”)
• Weight: 255g (9oz)
Product Package Includes:
1- 18-36VDC - TP-DCDC-2448Dx2-HP
Product Data Sheet
Tycon Power Learning Center Presentation