NEW and Exclusive at Baltic Networks! Lowest Cost 5GHz Gigabit MiMO complete CPE in a box!
StationTik™ features the powerful MikroTik RouterBoard RB/711G-5HnD enclosed in a weatherproof enclosure with a built-in 15dBi dual-polarity antenna. This gigabit routerboard features a MiMO 5.8GHz radio with 23dbm output. StationTik™ unique design allows it to connect to any pole design with the included pole straps. Fully assembled, ready to go, including a gigabit PoE injector and 24VDC power supply.
StationTik™ 5G MIMO Includes:
- Outdoor Sealed Enclosure, with 15dBi dual-polarity panel antenna, frequency range: 5470-5850MHz, beam width: 28°/30°
- MikroTik RouterBOARD RB/711G-5HnD with 400MHz Atheros Processor, built in 5.875 802.11a/n, 25dbm wireless card
- 24Vdc Power Supply and a Gigabit passive PoE injector
- Mounting Straps (the NanoBracket not included, SKU# MT-NANO U sold separately)
StationTik™ Features:
- Total Max Output Power: 40 dBm
- The integrated 5GHz 802.11a/n wireless card is capable of up to 25dBm (320mW). It has built in 16kV ESD protection on both the RF and Ethernet ports
- Material: ABS UV Stabilized plastic, aluminium screws
-Speeds up to 300Mbps!
- MikroTik RouterOS Level 3 license
- The most affordable wireless MPLS endpoint!
- Standard 1 Year MikroTik product warranty applies
StationTik™ Specifications:
-CPU: Atheros AR7240 400Mhz Network Processor
-Memory: 32MB DDR SDRAM
-Storage: 32MB NAND
-Ethernet: 10/100/1000 Fast Ethernet Auto-MDI/X
-miniPCI: None
-Wireless: Built in 5Ghz, AR9283 802.11a/n, 25dBm
-Power: PoE 8-30V DC on Ether1 (Requires RBGPOE PoE injector for Gigabit mode, will work in 10/100 mode), 4.5W Max
NOTE TO MIKROTIK USERS
Customers are reminded to download the latest version of MikroTik RouterOS to ensure that wireless software is working at its best
MikroTik Nstreme V2:
MikroTik has developed a new wireless protocol based on TDMA technology (Time Division Multiple Access) -Nv2 (Nstreme version 2). TDMA is a channel access method for shared medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots. The users transmit in rapid succession, one after the other, each using his own time slot. This allows multiple stations to share the same transmission medium (e.g. radio frequency channel) while using only a part of its channel capacity.
The most important benefits of Nv2 are:
- Increased speed
- More client connections in PTM environments
- Lower latency
- No distance limitations
- No penalty for long distance
Starting from RouterOS v5.you can configure Nv2 in the Wireless menu:
- 5/10/20/40 MHz channel support
- 802.11n MIMO Atheros AR92xx support
- R52, R52H, AR5414 backward compatible
- Mixed systems possible
- Ability to set CPE association priorities, so when AP switches to Nv2, all CPEs switch too, allowing easy migration and upgrade
With 802.11n and Nv2, approx. 97Mbps UDP traffic and 94Mbs TCP traffic through RB711 in one direction using one chain are expected.
Technical Data Sheets and User Manuals:
StationTik 5G MIMO Data Sheet
StationTik™ is a registered trademark of Maxxwave Corporation, all rights reserved. Patent pending..
