NEW and Exclusive from Maxxwave! Lowest Cost 2.4GHz High Powered complete CPE in a box!
StationTik™ features the powerful MikroTik RouterBoard RB/711-2Hn enclosed in a weatherproof enclosure with a built-in 14dBi dual-polarity antenna. The routerboard features a built-in 2.4GHz radio with 23dbm output. StationTik™ unique design allows it to connect to any pole design with the included pole straps. Fully assembled, ready to go and with the 24VDC power supply included.
StationTik™ Includes:
- Outdoor Sealed Enclosure, with 14dBi panel anteenna (2.412-2.472GHz frequency range)
- MikroTik RouterBOARD RB/711-2Hn with 400MHz Atheros Processor
- 24Vdc, 19Watt PoE Power Supply
- Integrated 27dBm 2.4GHz 802.11N 1x1 Radio
- Mounting Straps (NanoBracket not included, SKU# MT-NANO U sold separately)
StationTik™ Features:
- Total Max Output Power: 41 dBm
- Antenna beam-width: 30 Degrees
- Material: ABS UV Stabilized plastic, aluminium screws
- Unit configured for vertical polarity, easily user adjustable by antenna rotation
- Speeds up to 150Mbps!
- MikroTik RouterOS Level 3 license
- The most affordable wireless MPLS endpoint!
- Standard 1 Year MikroTik product warranty applies
NOTE TO MIKROTIK USERS
Customers are reminded to download the latest version of MikroTik RouterOS to ensure that wireless software is working at its best
MikroTik Nstreme V2
MikroTik has developed a new wireless protocol based on TDMA technology (Time Division Multiple Access) -Nv2 (Nstreme version 2). TDMA is a channel access method for shared medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots. The users transmit in rapid succession, one after the other, each using his own time slot. This allows multiple stations to share the same transmission medium (e.g. radio frequency channel) while using only a part of its channel capacity.
The most important benefits of Nv2 are:
- Increased speed
- More client connections in PTM environments
- Lower latency
- No distance limitations
- No penalty for long distance
Starting from RouterOS v5.0beta5 you can configure Nv2 in the Wireless menu:
- 5/10/20/40 MHz channel support
- 802.11n MIMO Atheros AR92xx support
- R52, R52H, AR5414 backward compatible
- Mixed systems possible
- Ability to set CPE association priorities, so when AP switches to Nv2, all CPEs switch too, allowing easy migration and upgrade
With 802.11n and Nv2, approx. 97Mbps UDP traffic and 94Mbs TCP traffic through RB711 in one direction using one chain are expected.
StationTik™ combines the best of MikroTik RB/711-2Hn and StationBox Enclosure System to form the lowest cost MikroTik 2GHz CPE on the market today!
Exclusive from MaxxWave, StationTik™ products make it possible for a MikroTik user to easily connect up with a Ubiquiti antenna. StationTik™ 2 features MikroTik RB/711-2Hn RouterBOARD with a 400Mhz Processor, on board 2.4GHz high powered 802.11n 1x1 Radio, perfect for your CPE requirements. As of software V4.11, you can now run 5/10/20MHz channels and it is backwards compatible with legacy 802.11a systems.
Technical Data Sheets and User Manuals:
StationTik 2 Data Sheet
StationTik™ is a registered trademark of Maxxwave Corporation, all rights reserved. Patent pending..
