(888) 929-3610
Affordable Wireless Solutions

RB435G-MOD Complete - MikroTik RouterBOARD 433G (RB/435G-Modified) Complete with Desktop Enclosure and Power Supply

Availability: In Stock

Price as configured: $0.00

Mikrotik Training - Router OS Training - Learn Mikrotik - MTCNA - MTCRE - MTCWE - MTCTCE - MTCUME - MTCINE

MikroTik RouterBOARD 433G (RB/435G-Modified) Complete with enclosure and power supply

This is a RB/435G, modified to be a RB/433G. We removed the 2 bottom miniPCIe slots so the board can fit in any 433 case.

This complete kit does not come with a wireless card, pigtails, antennas or USB extenders. They are available as add-on options.

CPU: Atheros AR7161 680MHz (800MHz option supported)
Memory: 256MB DDR SDRAM onboard memory
Boot loader: RouterBOOT
Data storage: 128MB onboard NAND memory chip and microSD slot for expansion
Ethernet: Three 10/100/1000 Gigabit Ethernet ports with Auto-MDI/X
miniPCI: Thre miniPCI Type IIIA/IIIB slots
Expansion: Two USB 2.0 ports with powering (5V 1A supply)
Extras: Reset switch, beeper, temperature, voltage and current monitors
Serial port: One DB9 RS232C asynchronous serial port
LEDs: Power, NAND activity, 5 user LEDs
Power options: PoE: 8-28V DC on Ether1 (Non 802.3af). Jack: 8-30V DC
Dimensions: 105 mm x 154 mm, Weight: 153g
Power consumption: ~4.5W without extension cards
Output to cards: 19W without any cooling, up to 40W with active cooling
Operating System: MikroTik RouterOS, L5 license
Indoor Wall-Mountable Steel Case Included
24Vdc Switching Power Supply Included

Operating System Features:
Not all features may be available due to product hardware configuration.

The device comes with RouterOS - the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager. RouterOS is a stand-alone operating system based on the Linux v3.3.5 kernel. You can try RouterOS today, go to MikroTik Website for a free-trial demo. The free trial provides all of the features with no limitations. Major features include:

Firewall:
Statefull filtering
Source and destination NAT
NAT helpers (h323, pptp, quake3, sip, ftp, irc, tftp)
Internal connection, routing and packet marks
Filtering by IP address and address range, port and port range, IP protocol, DSCP and many more
Address lists
Custom Layer7 matcher
IPv6 support
PCC - per connection classifier, used in load balancing configurations

Routing:
Static routing
Virtual Routing and Forwarding (VRF)
Policy based routing
Interface routing
ECMP routing
IPv4 dynamic routing protocols: RIP v1/v2, OSPFv2, BGP v4
IPv6 dynamic routing protocols: RIPng, OSPFv3, BGP
Bi-directional Forwarding Detection ( BFD)

MPLS:
Static Label bindings for IPv4
Label Distribution protocol for IPv4
RSVP Traffic Engineering tunnels
VPLS MP-BGP based autodiscovery and signaling
MP-BGP based MPLS IP VPN
complete list of MPLS features

VPN:
Ipsec – tunnel and transport mode, certificate or PSK, AH and ESP security protocols. Hardware encryption support on RouterBOARD 1000.
Point to point tunneling (OpenVPN, PPTP, PPPoE, L2TP, SSTP)
Advanced PPP features (MLPPP, BCP)
Simple tunnels ( IPIP, EoIP) IPv4 andIPv6 support
6to4 tunnel support (IPv6 over IPv4 network)
VLAN – IEEE802.1q Virtual LAN support, Q-in-Q support
MPLS based VPNs

Wireless:
IEEE802.11a/b/g wireless client and access point
Full IEEE802.11n support
Nstreme and Nstreme2 proprietary protocols
NV2 protocol
Wireless Distribution System (WDS)
Virtual AP
WEP, WPA, WPA2
Access control list
Wireless client roaming
WMM
HWMP+ Wireless MESH protocol
MME wireless routing protocol

DHCP:
Per interface DHCP server
DHCP client and relay
Static and dynamic DHCP leases
RADIUS support
Custom DHCP options
DHCPv6 Prefix Delegation (DHCPv6-PD)
DHCPv6 Client
Hotspot
Plug-n-Play access to the Network
Authentication of local Network Clients
Users Accounting
RADIUS support for Authentication and Accounting

QoS:
Hierarchical Token Bucket ( HTB) QoS system with CIR, MIR, burst and priority support
Simple and fast solution for basic QoS implementation - Simple queues
Dynamic client rate equalization ( PCQ)

Proxy:
HTTP caching proxy server
Transparent HTTP proxy
SOCKS protocol support
DNS static entries
Support for caching on a separate drive
Parent proxy support
Access control list
Caching list

Tools:
Ping, traceroute
Bandwidth test, ping flood
Packet sniffer, torch
Telnet, ssh
E-mail and SMS send tools
Automated script execution tools
CALEA
File Fetch tool
Advanced traffic generator
Other features
Samba support
OpenFlow support
Bridging – spanning tree protocol (STP, RSTP), bridge firewall and MAC natting.
Dynamic DNS update tool
NTP client/server and synchronization with GPS system
VRRP v2 and v3 support
SNMP
M3P - MikroTik Packet packer protocol for wireless links and ethernet
MNDP - MikroTik neighbor discovery protocol, supports CDP (Cisco discovery protocol)
RADIUS authentication and accounting
TFTP server
Synchronous interface support (Farsync cards only) (Removed in v5.x)
Asynchronous – serial PPP dial-in/dial-out, dial on demand
ISDN – dial-in/dial-out, 128K bundle support, Cisco HDLC, x75i, x75ui, x75bui line protocols, dial on demand


Technical Data Sheets and User Manuals:
What is RouterOS?
RouterOS User Manuals and Technical Documentation
Technical Support Information
 MikroTik Technical Support Information

1 x Maxxwave 24Vdc Switching Power Supply (24W)   +$7.45
1 x MikroTik case for RB433-series Non-branded Indoor Steel Wall-Mountable   +$21.50
1 x MikroTik RouterBOARD RB/433G (RB/435 Modified)   +$179.00
Assembly Service for Indoor Systems   +$10.00

* Required Fields

Price as configured: $0.00


Available Services For This Product

Related Products

Check items to add to the cart or
select all


MikroTik RouterBOARD 433G (RB/435G-MOD) Complete with Desktop Enclosure and Power Supply
sku RB435G-MOD Complete
Manufacturer MikroTik
Icons No

Back to top