(888) 929-3610
Affordable Wireless Solutions

MW-UBTik-AC-PTP - Maxxwave UBTik 5GHz 802.11AC PTP Link Starter Kit

Availability: Pre Order

Price as configured: $0.00

Need Help Now?

Get help from our experienced consultants

MikroTik Long-Range 5GHz PtP features 2x Maxxwave UBTik High Powered 5GHz 802.11ac MiMO radios and 2x Ubiquiti RocketDish Antennas. This kit has everything you need. Just add CAT5 cable, plug-in and play!

The total output power for this kit is 55dBm


This complete PtP link kit Includes:

2 x UBTik 5GHz 802.11ac Gigibit MiMO Radios
2 x Ubiquiti RocketDish 5GHz 30dBi parabolic antennas
4 x RP-SMA to RP-SMA weatherproof jumper cables (included with the antennas)
4 x RP-SMA to RP-SMA patch cables (as spares)
2 x 24Vdc switching power supply (US plug)
2 x Gigabit passive PoE injectors
All mounting hardware

IMPORTANT NOTE TO MIKROTIK USERS
Customers are reminded to download the latest version of MikroTik RouterOS to ensure that wireless software is working at its best.

MikroTik Nstreme V2 Available Now with MikroTik RouterOS V.5
MikroTik has developed a new wireless protocol based on TDMA technology (Time Division Multiple Access) -Nv2 (Nstreme version 2). TDMA is a channel access method for shared medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots. The users transmit in rapid succession, one after the other, each using his own time slot. This allows multiple stations to share the same transmission medium (e.g. radio frequency channel) while using only a part of its channel capacity.

The most important benefits of Nv2 are:
• Increased speed
• More client connections in PTM environments
• Lower latency
• No distance limitations
• No penalty for long distance

Starting from RouterOS v5 you can configure Nv2 in the wireless menu:
• 5/10/20/40 MHz channel support
• 802.11n MIMO Atheros AR92xx support
• R52, R52H, AR5414 backward compatible
• Mixed systems possible
• Ability to set CPE association priorities, so when AP switches to Nv2, all CPEs switch too, allowing easy migration and upgrade

Technical Data Sheets and User Manuals:

Maxxwave UBTik-AC Data Sheet
What is RouterOS?
RouterOS User Manuals and Technical Documentation

UBTik™ is a registered trademark of Maxxwave Inc., all rights reserved. Patent pending.

 

RouterOS User Manuals and Technical Documentation
MikroTik Technical Support Information

What is RouterOS?
RouterOS Manual
RouterOS Features

Not all features may be available due to product hardware configuration.

The device comes with RouterOS - the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager. RouterOS is a stand-alone operating system based on the Linux v3.3.5 kernel. You can try RouterOS today, go to MikroTik Website for a free-trial demo. The free trial provides all of the features with no limitations. Major features include:

Firewall:

Statefull filtering Source and destination NAT NAT helpers (h323, pptp, quake3, sip, ftp, irc, tftp) Internal connection, routing and packet marks Filtering by IP address and address range, port and port range, IP protocol, DSCP and many more Address lists Custom Layer7 matcher IPv6 support PCC - per connection classifier, used in load balancing configurations

Routing:

Static routing Virtual Routing and Forwarding (VRF) Policy based routing Interface routing ECMP routing IPv4 dynamic routing protocols: RIP v1/v2, OSPFv2, BGP v4 IPv6 dynamic routing protocols: RIPng, OSPFv3, BGP Bi-directional Forwarding Detection ( BFD)

MPLS:

Static Label bindings for IPv4 Label Distribution protocol for IPv4 RSVP Traffic Engineering tunnels VPLS MP-BGP based autodiscovery and signaling MP-BGP based MPLS IP VPN complete list of MPLS features

VPN:

Ipsec – tunnel and transport mode, certificate or PSK, AH and ESP security protocols. Hardware encryption support on RouterBOARD 1000. Point to point tunneling (OpenVPN, PPTP, PPPoE, L2TP, SSTP) Advanced PPP features (MLPPP, BCP) Simple tunnels ( IPIP, EoIP) IPv4 andIPv6 support 6 to 4 tunnel support (IPv6 over IPv4 network) VLAN – IEEE802.1q Virtual LAN support, Q-in-Q support MPLS based VPNs

Wireless:

IEEE802.11a/b/g wireless client and access point Full IEEE802.11n support Nstreme and Nstreme2 proprietary protocols NV2 protocol Wireless Distribution System (WDS) Virtual AP WEP, WPA, WPA2 Access control list Wireless client roaming WMM HWMP+ Wireless MESH protocol MME wireless routing protocol

DHCP:

Per interface DHCP server DHCP client and relay Static and dynamic DHCP leases RADIUS support Custom DHCP options DHCPv6 Prefix Delegation (DHCPv6-PD) DHCPv6 Client Hotspot Plug-n-Play access to the Network Authentication of local Network Clients Users Accounting RADIUS support for Authentication and Accounting

QoS:

Hierarchical Token Bucket ( HTB) QoS system with CIR, MIR, burst and priority support Simple and fast solution for basic QoS implementation - Simple queues Dynamic client rate equalization ( PCQ)

Proxy:

HTTP caching proxy server Transparent HTTP proxy SOCKS protocol support DNS static entries Support for caching on a separate drive Parent proxy support Access control list Caching list

Tools:

Ping, traceroute Bandwidth test, ping flood Packet sniffer, torch Telnet, ssh E-mail and SMS send tools Automated script execution tools CALEA File Fetch tool Advanced traffic generator

Other features:

Samba support OpenFlow support Bridging – spanning tree protocol (STP, RSTP), bridge firewall and MAC natting. Dynamic DNS update tool NTP client/server and synchronization with GPS system VRRP v2 and v3 support SNMP M3P - MikroTik Packet packer protocol for wireless links and ethernet MNDP - MikroTik neighbor discovery protocol, supports CDP (Cisco discovery protocol) RADIUS authentication and accounting TFTP server Synchronous interface support (Farsync cards only) (Removed in v5.x) Asynchronous – serial PPP dial-in/dial-out, dial on demand ISDN – dial-in/dial-out, 128K bundle support, Cisco HDLC, x75i, x75ui, x75bui line protocols, dial on demand

 

MikroTik Product Comparison
Ubiquiti RocketDish 4.9-5GHz 30dBi Dual-Pol Parabolic Antenna (RP-SMA cables included)   +$119.00
Laird RJ45-FT Replaceable Adapter for the Ethernet Connector System   +$0.99
MikroTik RouterBOARD 922UAGS-5HPacD 5Ghz 802.11ac   +$83.00
Maxxwave Low Cost Gigabit Passive PoE Injector   +$6.00
Maxxwave 24Vdc Switching Power Supply (24W)   +$7.45
Maxxwave Spare Patch Cable RP-SMA to RP-SMA (11.8in / 30cm)   +$7.95
Maxxwave Pigtail MMCX to RP-SMA Bulkhead w/O-Ring (4 in / 10cm)   +$5.50
Maxxwave UBTik - MikroTik Access Point for Ubiquiti Antenna (Enclosure Only)   +$39.95
Assembly Service for Indoor Systems   +$10.00

* Required Fields

Price as configured: $0.00


Available Services For This Product

Related Products

Check items to add to the cart or
select all


  1. Laird Radome Cover for a 2FT Parabolic Dish Antenna Laird Radome Cover for a 2FT Parabolic Dish Antenna

    Regular Price: $69.95

    Special Price: $45.75

  2. Maxxwave Outdoor Enclosure Pipe Clamp System Maxxwave Outdoor Enclosure Pipe Clamp System

    Regular Price: $9.95

    Special Price: $8.95

  3. Primus Outdoor Cat5e Cable Shielded CMX Black 1000 Ft Primus Outdoor Cat5e Cable Shielded CMX Black 1000 Ft

    Regular Price: $161.00

    Special Price: $153.00

  4. Primus Outdoor Cat5e Cable Unshielded CMX Black 1000 Ft Primus Outdoor Cat5e Cable Unshielded CMX Black 1000 Ft

    Regular Price: $120.00

    Special Price: $106.00

  5. Radome Cover for Ubiquiti Rocketdish 2FT Dish Antenna Radome Cover for Ubiquiti Rocketdish 2FT Dish Antenna

    Regular Price: $79.99

    Special Price: $57.25

MikroTik PtP Link Kit - 5GHz 802.11ac Long Range
sku MW-UBTik-AC-PTP
Manufacturer Maxxwave
Icons Consulting, Pre-config, Custom branding, Tech-support

Back to top