The enclosure incorporates an integrated power supply and micro UPS, with optional backup power supply. Output voltage from the primary power supply is monitored and filtered to prevent router restarts due to power surges. The failover to UPS or backup power supply is achieved in less than 30ms. The built-in UPS notifies the board to perform a backup and a graceful shutdown. Based on the router configuration, internal battery can provide power for up to 2 hours. Furthermore, the ER2011 offers an AUXILLARY output power port from the UPS with the ability to power an external broadband modem to minimize the effects of any potential connectivity loss due to power outage.
The enclosure is made of extruded and machined aluminum top and steel bottom, immediately creating an impression of confidence and reliability. It has a distinguished look with a heatsink enhanced top that incorporates fins to provide cooling even when placed between two rack servers. Dimensions of the case are 350 x 200 x 45mm (14 x 8 x 2").
Designed to accommodate any type of deployment; high rubber feet are optimized for desktop deployment and to allow cables to pass below the router. Macrotick designed a proprietary universal sliding rails system for either wall or rack mounting, leaving the cables accessible and the LCD screen visible at all times (if included with a board). Enclosure can be locked in virtually any position (for example: positioned to avoid the rack doors pressing the cables). Once rails are mounted, the enclosure can be installed or removed without screwdrivers or any other tooling. Rails are optional and available as an add-on accessory.
This product houses a RB2011UiAS-2HnD card
• TX Power: 30dBm
• Max Power Consumption: 11W
• CPU: Atheros AR9344 600MHz
• Memory: 128MB DDR2 SDRAM on board memory
• Ethernet: Five (5) 10/100 Mbit Fast Ethernet ports with Auto-MDI/X, Five (5) 10/100/1000 Mbit Gigabit Ethernet ports with Auto-MDI/X
• Wireless: 2HnD - Built in 2GHz dual chain 802.11b/g/n wireless device
• LAN ports: 5
• miniPCI: 0
• Integrated Wireless: Yes
• PoE: 8-28V DC on Ether1
• Voltage Monitor: Yes
• PCB temperature sensor: Yes
• CPU temperature monitor: No
• Operating System: RouterOS
• RouterOS License: Level5
• Extras: reset button, reset jumper, RJ45 serial port, powered micro-B USB connector
Technical Data Sheets and User Manuals:
MikroTIk RB2011UiAS-2HnD Product Data Sheet
MikroTIk RB2011UiAS-2HnD Quick Setup Guide
This Edge Router incorporates a RB2011 board and an enterprise grade enclosure with a built in power supply and UPS.