With up to 25 watts of driving power (802.3at), the Amplifier provides direct drive of a standard Horn speaker and supports a line out connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the Paging Amplifier can be configured to listen to multicast address and port number combinations to form paging zones.
The V2 Paging Amplifier can be configured as a Night Ringer with two SIP extensions. One extension can be assigned to a page group for auto answer paging. The second extension can be assigned to a “First-to-Answer” Night Ring group with IP phones. An audio ring file is activated when the second SIP extension of the Paging Amplifier is dialed. If any of the IP phones in the ring group is answered (or if the caller hangs up), the Paging Amplifier stops ringing.
Standard night ringer function can be utilized as detailed in the Operation Guide.
The V2 Paging Amplifier is the most powerful PoE-powered paging device on the market today and perfect for any environment requiring high-powered mass notification.
• SIP compatible
• Night Ringer function
• Dual speed 10/100 Mbps
• Web-base firmware upgrades
• Power-over-ethernet enabled
• Line-out connector
• Protocol: SIP RFC 3261 Compatible
• Ethernet I/F: 10/100 Mbps
• Power Input: PoE 802.3at or 802.3af
• Operating Temperature: 14 degrees F to 122 degrees F
• Payload Types: G711
• Output Level: 802.3af - Up to 8 watts, 802.3at - Up to 25 watts
• Line In: Input Signal Amplitudes - 2.0 VPP maximum, Input Impedance - 10k ohm
• Line Out: Output Signal Amplitudes - 2.0 VPP maximum, Output Level - +2dBm nominal, Total Harmonic Distortion - 0.5% maximum, Output Impedance - 10k ohm
• Regulatory Compliance: FCC Class A, UL 60950
• Warranty: 2 Year Limited
Technical Data Sheets and User Manuals:
CD-011061 Data Sheet
CD-011061 Quick Start Guide
CD-011061 Installation Quick-Reference Guide
CD-011061 Outdoor Notification Testing Example Using the CyberData Paging Amplifier
If you are experiencing installation or operating problems with your VoIP product, please contact CyberData Technical Support. Their technical staff will be happy to answer all of your product questions and try to resolve any operating problems. Before contacting their technical support staff, please check their FAQs, Drivers and Documentation sections of the product pages first to look for updated drivers or manuals. Sometimes installation or operating issues can be solved by updating firmware or reading through the FAQs and Operating Guides.
The fastest way to get technical support for your VoIP product is to Contact VoIP Technical Support
. They have several technical support staff monitoring this form and they will contact you within 12 hours after receiving submission.
Satisfaction Guarantee and Warranty Information:
This product comes with a (2) year limited warranty.
CyberData warranty returns are handled by CyberData directly. For more information on returns or warranty information please visit: CyberData Repair and RMA Requests
The CyberData SIP-enabled IP V2 Paging Amplifier is a Powered over Ethernet (PoE 802.3af or 802.3at) and VoIP paging device that provides an easy method for implementing an IP-based overhead paging system for both new and legacy installations.